From: Jean-Philippe Brucker <jean-philippe@linaro.org>
To: peter.maydell@linaro.org
Cc: richard.henderson@linaro.org, qemu-arm@nongnu.org,
qemu-devel@nongnu.org,
Jean-Philippe Brucker <jean-philippe@linaro.org>
Subject: [PATCH v3 5/6] target/arm/helper: Check SCR_EL3.{NSE, NS} encoding for AT instructions
Date: Wed, 9 Aug 2023 13:37:05 +0100 [thread overview]
Message-ID: <20230809123706.1842548-6-jean-philippe@linaro.org> (raw)
In-Reply-To: <20230809123706.1842548-1-jean-philippe@linaro.org>
The AT instruction is UNDEFINED if the {NSE,NS} configuration is
invalid. Add a function to check this on all AT instructions that apply
to an EL lower than 3.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
---
target/arm/helper.c | 38 +++++++++++++++++++++++++++-----------
1 file changed, 27 insertions(+), 11 deletions(-)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index fbb03c364b..dbfe9f2f5e 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -3616,6 +3616,22 @@ static void ats1h_write(CPUARMState *env, const ARMCPRegInfo *ri,
#endif /* CONFIG_TCG */
}
+static CPAccessResult at_e012_access(CPUARMState *env, const ARMCPRegInfo *ri,
+ bool isread)
+{
+ /*
+ * R_NYXTL: instruction is UNDEFINED if it applies to an Exception level
+ * lower than EL3 and the combination SCR_EL3.{NSE,NS} is reserved. This can
+ * only happen when executing at EL3 because that combination also causes an
+ * illegal exception return. We don't need to check FEAT_RME either, because
+ * scr_write() ensures that the NSE bit is not set otherwise.
+ */
+ if ((env->cp15.scr_el3 & (SCR_NSE | SCR_NS)) == SCR_NSE) {
+ return CP_ACCESS_TRAP;
+ }
+ return CP_ACCESS_OK;
+}
+
static CPAccessResult at_s1e2_access(CPUARMState *env, const ARMCPRegInfo *ri,
bool isread)
{
@@ -3623,7 +3639,7 @@ static CPAccessResult at_s1e2_access(CPUARMState *env, const ARMCPRegInfo *ri,
!(env->cp15.scr_el3 & (SCR_NS | SCR_EEL2))) {
return CP_ACCESS_TRAP;
}
- return CP_ACCESS_OK;
+ return at_e012_access(env, ri, isread);
}
static void ats_write64(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -5505,38 +5521,38 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 0,
.access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
.fgt = FGT_ATS1E1R,
- .writefn = ats_write64 },
+ .accessfn = at_e012_access, .writefn = ats_write64 },
{ .name = "AT_S1E1W", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 1,
.access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
.fgt = FGT_ATS1E1W,
- .writefn = ats_write64 },
+ .accessfn = at_e012_access, .writefn = ats_write64 },
{ .name = "AT_S1E0R", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 2,
.access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
.fgt = FGT_ATS1E0R,
- .writefn = ats_write64 },
+ .accessfn = at_e012_access, .writefn = ats_write64 },
{ .name = "AT_S1E0W", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 3,
.access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
.fgt = FGT_ATS1E0W,
- .writefn = ats_write64 },
+ .accessfn = at_e012_access, .writefn = ats_write64 },
{ .name = "AT_S12E1R", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 4,
.access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
- .writefn = ats_write64 },
+ .accessfn = at_e012_access, .writefn = ats_write64 },
{ .name = "AT_S12E1W", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 5,
.access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
- .writefn = ats_write64 },
+ .accessfn = at_e012_access, .writefn = ats_write64 },
{ .name = "AT_S12E0R", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 6,
.access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
- .writefn = ats_write64 },
+ .accessfn = at_e012_access, .writefn = ats_write64 },
{ .name = "AT_S12E0W", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 7,
.access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
- .writefn = ats_write64 },
+ .accessfn = at_e012_access, .writefn = ats_write64 },
/* AT S1E2* are elsewhere as they UNDEF from EL3 if EL2 is not present */
{ .name = "AT_S1E3R", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 6, .crn = 7, .crm = 8, .opc2 = 0,
@@ -8078,12 +8094,12 @@ static const ARMCPRegInfo ats1e1_reginfo[] = {
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 0,
.access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
.fgt = FGT_ATS1E1RP,
- .writefn = ats_write64 },
+ .accessfn = at_e012_access, .writefn = ats_write64 },
{ .name = "AT_S1E1WP", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 1,
.access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
.fgt = FGT_ATS1E1WP,
- .writefn = ats_write64 },
+ .accessfn = at_e012_access, .writefn = ats_write64 },
};
static const ARMCPRegInfo ats1cp_reginfo[] = {
--
2.41.0
next prev parent reply other threads:[~2023-08-09 12:39 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-09 12:37 [PATCH v3 0/6] target/arm: Fixes for RME Jean-Philippe Brucker
2023-08-09 12:37 ` [PATCH v3 1/6] target/arm/ptw: Load stage-2 tables from realm physical space Jean-Philippe Brucker
2023-08-09 12:37 ` [PATCH v3 2/6] target/arm/helper: Fix tlbmask and tlbbits for TLBI VAE2* Jean-Philippe Brucker
2023-08-09 12:37 ` [PATCH v3 3/6] target/arm: Skip granule protection checks for AT instructions Jean-Philippe Brucker
2023-08-09 12:37 ` [PATCH v3 4/6] target/arm: Pass security space rather than flag " Jean-Philippe Brucker
2023-08-09 12:37 ` Jean-Philippe Brucker [this message]
2023-08-09 12:37 ` [PATCH v3 6/6] target/arm/helper: Implement CNTHCTL_EL2.CNT[VP]MASK Jean-Philippe Brucker
2023-08-10 13:16 ` [PATCH v3 0/6] target/arm: Fixes for RME Peter Maydell
2023-08-10 13:36 ` Jean-Philippe Brucker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230809123706.1842548-6-jean-philippe@linaro.org \
--to=jean-philippe@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).