[PATCH 2/3] hw/mips/jazz: Move the NIC init code into a separate function

[Thomas Huth <thuth@redhat.com>]

The mips_jazz_init() function is already quite big, so moving
away some code here can help to make it more understandable.
Additionally, by moving this code into a separate function, the
next patch (that will refactor the for-loop around the NIC init
code) will be much shorter and easier to understand.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 hw/mips/jazz.c | 62 ++++++++++++++++++++++++++++----------------------
 1 file changed, 35 insertions(+), 27 deletions(-)

diff --git a/hw/mips/jazz.c b/hw/mips/jazz.c
index 358bb6f74f..a95a1bd743 100644
--- a/hw/mips/jazz.c
+++ b/hw/mips/jazz.c
@@ -114,6 +114,40 @@ static const MemoryRegionOps dma_dummy_ops = {
     .endianness = DEVICE_NATIVE_ENDIAN,
 };
 
+static void mips_jazz_init_net(NICInfo *nd, IOMMUMemoryRegion *rc4030_dma_mr,
+                               DeviceState *rc4030, MemoryRegion *dp8393x_prom)
+{
+    DeviceState *dev;
+    SysBusDevice *sysbus;
+    int checksum, i;
+    uint8_t *prom;
+
+    qemu_check_nic_model(nd, "dp83932");
+
+    dev = qdev_new("dp8393x");
+    qdev_set_nic_properties(dev, nd);
+    qdev_prop_set_uint8(dev, "it_shift", 2);
+    qdev_prop_set_bit(dev, "big_endian", target_words_bigendian());
+    object_property_set_link(OBJECT(dev), "dma_mr",
+                             OBJECT(rc4030_dma_mr), &error_abort);
+    sysbus = SYS_BUS_DEVICE(dev);
+    sysbus_realize_and_unref(sysbus, &error_fatal);
+    sysbus_mmio_map(sysbus, 0, 0x80001000);
+    sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(rc4030, 4));
+
+    /* Add MAC address with valid checksum to PROM */
+    prom = memory_region_get_ram_ptr(dp8393x_prom);
+    checksum = 0;
+    for (i = 0; i < 6; i++) {
+        prom[i] = nd->macaddr.a[i];
+        checksum += prom[i];
+        if (checksum > 0xff) {
+            checksum = (checksum + 1) & 0xff;
+        }
+    }
+    prom[7] = 0xff - checksum;
+}
+
 #define MAGNUM_BIOS_SIZE_MAX 0x7e000
 #define MAGNUM_BIOS_SIZE                                                       \
         (BIOS_SIZE < MAGNUM_BIOS_SIZE_MAX ? BIOS_SIZE : MAGNUM_BIOS_SIZE_MAX)
@@ -287,33 +321,7 @@ static void mips_jazz_init(MachineState *machine,
             nd->model = g_strdup("dp83932");
         }
         if (strcmp(nd->model, "dp83932") == 0) {
-            int checksum, i;
-            uint8_t *prom;
-
-            qemu_check_nic_model(nd, "dp83932");
-
-            dev = qdev_new("dp8393x");
-            qdev_set_nic_properties(dev, nd);
-            qdev_prop_set_uint8(dev, "it_shift", 2);
-            qdev_prop_set_bit(dev, "big_endian", target_words_bigendian());
-            object_property_set_link(OBJECT(dev), "dma_mr",
-                                     OBJECT(rc4030_dma_mr), &error_abort);
-            sysbus = SYS_BUS_DEVICE(dev);
-            sysbus_realize_and_unref(sysbus, &error_fatal);
-            sysbus_mmio_map(sysbus, 0, 0x80001000);
-            sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(rc4030, 4));
-
-            /* Add MAC address with valid checksum to PROM */
-            prom = memory_region_get_ram_ptr(dp8393x_prom);
-            checksum = 0;
-            for (i = 0; i < 6; i++) {
-                prom[i] = nd->macaddr.a[i];
-                checksum += prom[i];
-                if (checksum > 0xff) {
-                    checksum = (checksum + 1) & 0xff;
-                }
-            }
-            prom[7] = 0xff - checksum;
+            mips_jazz_init_net(nd, rc4030_dma_mr, rc4030, dp8393x_prom);
             break;
         } else if (is_help_option(nd->model)) {
             error_report("Supported NICs: dp83932");
-- 
2.39.3