[PULL 26/41] hw/i2c: spelling fixes

["Philippe Mathieu-Daudé" <philmd@linaro.org>]

From: Michael Tokarev <mjt@tls.msk.ru>

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20230823065335.1919380-14-mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 include/hw/i2c/npcm7xx_smbus.h | 2 +-
 include/hw/misc/auxbus.h       | 2 +-
 hw/i2c/pm_smbus.c              | 2 +-
 hw/i2c/pmbus_device.c          | 2 +-
 hw/i2c/smbus_slave.c           | 2 +-
 hw/sensor/isl_pmbus_vr.c       | 2 +-
 hw/sensor/max34451.c           | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/include/hw/i2c/npcm7xx_smbus.h b/include/hw/i2c/npcm7xx_smbus.h
index 3555e6836f..dc45963c0e 100644
--- a/include/hw/i2c/npcm7xx_smbus.h
+++ b/include/hw/i2c/npcm7xx_smbus.h
@@ -58,7 +58,7 @@ typedef enum NPCM7xxSMBusStatus {
  * @sclht: The SCL high time register.
  * @fif_ctl: The FIFO control register.
  * @fif_cts: The FIFO control status register.
- * @fair_per: The fair preriod register.
+ * @fair_per: The fair period register.
  * @txf_ctl: The transmit FIFO control register.
  * @t_out: The SMBus timeout register.
  * @txf_sts: The transmit FIFO status register.
diff --git a/include/hw/misc/auxbus.h b/include/hw/misc/auxbus.h
index b05799d2f7..03cacdee42 100644
--- a/include/hw/misc/auxbus.h
+++ b/include/hw/misc/auxbus.h
@@ -106,7 +106,7 @@ void aux_bus_realize(AUXBus *bus);
  *
  * Returns the reply of the request.
  *
- * @bus Ths bus where the request happen.
+ * @bus The bus where the request happen.
  * @cmd The command requested.
  * @address The 20bits address of the slave.
  * @len The length of the read or write.
diff --git a/hw/i2c/pm_smbus.c b/hw/i2c/pm_smbus.c
index d7eae548cb..9ad6a47739 100644
--- a/hw/i2c/pm_smbus.c
+++ b/hw/i2c/pm_smbus.c
@@ -1,6 +1,6 @@
 /*
  * PC SMBus implementation
- * splitted from acpi.c
+ * split from acpi.c
  *
  * Copyright (c) 2006 Fabrice Bellard
  *
diff --git a/hw/i2c/pmbus_device.c b/hw/i2c/pmbus_device.c
index 8bc9d5108a..cef51663d0 100644
--- a/hw/i2c/pmbus_device.c
+++ b/hw/i2c/pmbus_device.c
@@ -1626,7 +1626,7 @@ static int pmbus_write_data(SMBusDevice *smd, uint8_t *buf, uint8_t len)
         break;
 
 passthrough:
-    /* Unimplimented registers get passed to the device */
+    /* Unimplemented registers get passed to the device */
     default:
         if (pmdc->write_data) {
             ret = pmdc->write_data(pmdev, buf, len);
diff --git a/hw/i2c/smbus_slave.c b/hw/i2c/smbus_slave.c
index feb3ec6333..2ef2c7c5f6 100644
--- a/hw/i2c/smbus_slave.c
+++ b/hw/i2c/smbus_slave.c
@@ -2,7 +2,7 @@
  * QEMU SMBus device emulation.
  *
  * This code is a helper for SMBus device emulation.  It implements an
- * I2C device inteface and runs the SMBus protocol from the device
+ * I2C device interface and runs the SMBus protocol from the device
  * point of view and maps those to simple calls to emulate.
  *
  * Copyright (c) 2007 CodeSourcery.
diff --git a/hw/sensor/isl_pmbus_vr.c b/hw/sensor/isl_pmbus_vr.c
index eb344dd5a9..e51269f6b8 100644
--- a/hw/sensor/isl_pmbus_vr.c
+++ b/hw/sensor/isl_pmbus_vr.c
@@ -101,7 +101,7 @@ static void isl_pmbus_vr_exit_reset(Object *obj)
     }
 }
 
-/* The raa228000 uses different direct mode coefficents from most isl devices */
+/* The raa228000 uses different direct mode coefficients from most isl devices */
 static void raa228000_exit_reset(Object *obj)
 {
     PMBusDevice *pmdev = PMBUS_DEVICE(obj);
diff --git a/hw/sensor/max34451.c b/hw/sensor/max34451.c
index a91d8bd487..9db52ef677 100644
--- a/hw/sensor/max34451.c
+++ b/hw/sensor/max34451.c
@@ -734,7 +734,7 @@ static void max34451_init(Object *obj)
 
     /*
      * get and set the temperature of the internal temperature sensor in
-     * centidegrees Celcius i.e.: 2500 -> 25.00 C, max is 327.67 C
+     * centidegrees Celsius i.e.: 2500 -> 25.00 C, max is 327.67 C
      */
     for (int i = 0; i < MAX34451_NUM_TEMP_DEVICES; i++) {
         object_property_add(obj, "temperature[*]", "uint16",
-- 
2.41.0