Re: [PATCH] hw/pci-bridge/cxl-upstream: Add serial number extended capability support

[Jonathan Cameron via <qemu-devel@nongnu.org>]

On Tue, 5 Sep 2023 10:48:54 +0200
Philippe Mathieu-Daudé <philmd@linaro.org> wrote:

> Hi Jonathan,
> 
> On 4/9/23 19:57, Jonathan Cameron wrote:
> > Will be needed so there is a defined serial number for
> > information queries via the Switch CCI.
> > 
> > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> > ---
> > No ordering dependencies wrt to other CXL patch sets.
> > 
> > Whilst we 'need' it for the Switch CCI set it is valid without
> > it and aligns with existing EP serial number support. Seems sensible
> > to upstream this first and reduce my out of tree backlog a little!
> > 
> >   hw/pci-bridge/cxl_upstream.c | 15 +++++++++++++--
> >   1 file changed, 13 insertions(+), 2 deletions(-)
> > 
> > diff --git a/hw/pci-bridge/cxl_upstream.c b/hw/pci-bridge/cxl_upstream.c
> > index 2b9cf0cc97..15c4d84a56 100644
> > --- a/hw/pci-bridge/cxl_upstream.c
> > +++ b/hw/pci-bridge/cxl_upstream.c
> > @@ -14,6 +14,11 @@
> >   #include "hw/pci/msi.h"
> >   #include "hw/pci/pcie.h"
> >   #include "hw/pci/pcie_port.h"
> > +/*
> > + * Null value of all Fs suggested by IEEE RA guidelines for use of
> > + * EU, OUI and CID
> > + */
> > +#define UI64_NULL (~0ULL)  
> 
> Already defined in hw/mem/cxl_type3.c, can we move it to some common
> CXL header? Or include/qemu/units.h?
> 
> >   #define CXL_UPSTREAM_PORT_MSI_NR_VECTOR 2
> >   
> > @@ -30,6 +35,7 @@ typedef struct CXLUpstreamPort {
> >       /*< public >*/
> >       CXLComponentState cxl_cstate;
> >       DOECap doe_cdat;
> > +    uint64_t sn;
> >   } CXLUpstreamPort;
> >   
> >   CXLComponentState *cxl_usp_to_cstate(CXLUpstreamPort *usp)
> > @@ -326,8 +332,12 @@ static void cxl_usp_realize(PCIDevice *d, Error **errp)
> >       if (rc) {
> >           goto err_cap;
> >       }
> > -
> > -    cxl_cstate->dvsec_offset = CXL_UPSTREAM_PORT_DVSEC_OFFSET;
> > +    if (usp->sn != UI64_NULL) {
> > +        pcie_dev_ser_num_init(d, CXL_UPSTREAM_PORT_DVSEC_OFFSET, usp->sn);
> > +        cxl_cstate->dvsec_offset = CXL_UPSTREAM_PORT_DVSEC_OFFSET + 0x0c;  
> 
> Could it be clearer to have:
> 
> diff --git a/hw/pci-bridge/cxl_upstream.c b/hw/pci-bridge/cxl_upstream.c
> @@ -23,2 +23,2 @@
> -#define CXL_UPSTREAM_PORT_DVSEC_OFFSET \
> -    (CXL_UPSTREAM_PORT_AER_OFFSET + PCI_ERR_SIZEOF)
> +#define CXL_UPSTREAM_PORT_DVSEC_OFFSET(offset) \
> +    (CXL_UPSTREAM_PORT_AER_OFFSET + PCI_ERR_SIZEOF + offset)
> 
> ?

The naming is going to be very confusing if we do as it becomes
an offset of an offset.

Given we've never yet cared that much about keeping these devices
looking stable to a guest, I can just leave a gap if this cap
not defined and use fixed offsets instead thus avoiding this
complexity.

> 
> > +    } else {
> > +        cxl_cstate->dvsec_offset = CXL_UPSTREAM_PORT_DVSEC_OFFSET;
> > +    }
> >       cxl_cstate->pdev = d;
> >       build_dvsecs(cxl_cstate);
> >       cxl_component_register_block_init(OBJECT(d), cxl_cstate, TYPE_CXL_USP);
> > @@ -366,6 +376,7 @@ static void cxl_usp_exitfn(PCIDevice *d)
> >   }
> >   
> >   static Property cxl_upstream_props[] = {
> > +    DEFINE_PROP_UINT64("sn", CXLUpstreamPort, sn, UI64_NULL),
> >       DEFINE_PROP_STRING("cdat", CXLUpstreamPort, cxl_cstate.cdat.filename),
> >       DEFINE_PROP_END_OF_LIST()
> >   };  
> 
>