[PATCH v4 08/10] hw/fsi: Added qtest

[Ninad Palsule <ninad@linux.ibm.com>]

Added basic qtests for FSI model.

Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
---
v3:
 - Added new qtest as per Cedric's comment.
V4:
 - Remove MAINTAINER and documentation changes from this commit
---
 tests/qtest/fsi-test.c  | 210 ++++++++++++++++++++++++++++++++++++++++
 tests/qtest/meson.build |   2 +
 2 files changed, 212 insertions(+)
 create mode 100644 tests/qtest/fsi-test.c

diff --git a/tests/qtest/fsi-test.c b/tests/qtest/fsi-test.c
new file mode 100644
index 0000000000..30bb7475c7
--- /dev/null
+++ b/tests/qtest/fsi-test.c
@@ -0,0 +1,210 @@
+/*
+ * QTest testcases for IBM's Flexible Service Interface (FSI)
+ *
+ * Copyright (c) 2023 IBM Corporation
+ *
+ * Authors:
+ *   Ninad Palsule <ninad@linux.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include <glib/gstdio.h>
+
+#include "qemu/module.h"
+#include "libqtest-single.h"
+
+/* Registers from ast2600 specifications */
+#define ASPEED_FSI_ENGINER_TRIGGER   0x04
+#define ASPEED_FSI_OPB0_BUS_SELECT   0x10
+#define ASPEED_FSI_OPB1_BUS_SELECT   0x28
+#define ASPEED_FSI_OPB0_RW_DIRECTION 0x14
+#define ASPEED_FSI_OPB1_RW_DIRECTION 0x2c
+#define ASPEED_FSI_OPB0_XFER_SIZE    0x18
+#define ASPEED_FSI_OPB1_XFER_SIZE    0x30
+#define ASPEED_FSI_OPB0_BUS_ADDR     0x1c
+#define ASPEED_FSI_OPB1_BUS_ADDR     0x34
+#define ASPEED_FSI_INTRRUPT_CLEAR    0x40
+#define ASPEED_FSI_INTRRUPT_STATUS   0x48
+#define ASPEED_FSI_OPB0_BUS_STATUS   0x80
+#define ASPEED_FSI_OPB1_BUS_STATUS   0x8c
+#define ASPEED_FSI_OPB0_READ_DATA    0x84
+#define ASPEED_FSI_OPB1_READ_DATA    0x90
+
+/*
+ * FSI Base addresses from the ast2600 specifications.
+ */
+#define AST2600_OPB_FSI0_BASE_ADDR 0x1e79b000
+#define AST2600_OPB_FSI1_BASE_ADDR 0x1e79b100
+
+static uint32_t aspeed_fsi_base_addr;
+
+static uint32_t aspeed_fsi_readl(QTestState *s, uint32_t reg)
+{
+    return qtest_readl(s, aspeed_fsi_base_addr + reg);
+}
+
+static void aspeed_fsi_writel(QTestState *s, uint32_t reg, uint32_t val)
+{
+    qtest_writel(s, aspeed_fsi_base_addr + reg, val);
+}
+
+/* Setup base address and select register */
+static void test_fsi_setup(QTestState *s, uint32_t base_addr)
+{
+    uint32_t curval;
+
+    /* Set the base select register */
+    if (base_addr == AST2600_OPB_FSI0_BASE_ADDR) {
+        aspeed_fsi_base_addr = base_addr;
+
+        /* Unselect FSI1 */
+        aspeed_fsi_writel(s, ASPEED_FSI_OPB1_BUS_SELECT, 0x0);
+        curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_BUS_SELECT);
+        g_assert_cmpuint(curval, ==, 0x0);
+
+        /* Select FSI0 */
+        aspeed_fsi_writel(s, ASPEED_FSI_OPB0_BUS_SELECT, 0x1);
+        curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_BUS_SELECT);
+        g_assert_cmpuint(curval, ==, 0x1);
+    } else if (base_addr == AST2600_OPB_FSI1_BASE_ADDR) {
+        aspeed_fsi_base_addr = base_addr;
+
+        /* Unselect FSI0 */
+        aspeed_fsi_writel(s, ASPEED_FSI_OPB0_BUS_SELECT, 0x0);
+        curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_BUS_SELECT);
+        g_assert_cmpuint(curval, ==, 0x0);
+
+        /* Select FSI1 */
+        aspeed_fsi_writel(s, ASPEED_FSI_OPB1_BUS_SELECT, 0x1);
+        curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_BUS_SELECT);
+        g_assert_cmpuint(curval, ==, 0x1);
+    } else {
+        g_assert_not_reached();
+    }
+}
+
+static void test_fsi_reg_change(QTestState *s, uint32_t reg, uint32_t newval)
+{
+    uint32_t base;
+    uint32_t curval;
+
+    base = aspeed_fsi_readl(s, reg);
+    aspeed_fsi_writel(s, reg, newval);
+    curval = aspeed_fsi_readl(s, reg);
+    g_assert_cmpuint(curval, ==, newval);
+    aspeed_fsi_writel(s, reg, base);
+    curval = aspeed_fsi_readl(s, reg);
+    g_assert_cmpuint(curval, ==, base);
+}
+
+static void test_fsi0_master_regs(const void *data)
+{
+    QTestState *s = (QTestState *)data;
+
+    test_fsi_setup(s, AST2600_OPB_FSI0_BASE_ADDR);
+
+    test_fsi_reg_change(s, ASPEED_FSI_OPB0_RW_DIRECTION, 0xF3F4F514);
+    test_fsi_reg_change(s, ASPEED_FSI_OPB0_XFER_SIZE, 0xF3F4F518);
+    test_fsi_reg_change(s, ASPEED_FSI_OPB0_BUS_ADDR, 0xF3F4F51c);
+    test_fsi_reg_change(s, ASPEED_FSI_INTRRUPT_CLEAR, 0xF3F4F540);
+    test_fsi_reg_change(s, ASPEED_FSI_INTRRUPT_STATUS, 0xF3F4F548);
+    test_fsi_reg_change(s, ASPEED_FSI_OPB0_BUS_STATUS, 0xF3F4F580);
+    test_fsi_reg_change(s, ASPEED_FSI_OPB0_READ_DATA, 0xF3F4F584);
+}
+
+static void test_fsi1_master_regs(const void *data)
+{
+    QTestState *s = (QTestState *)data;
+
+    test_fsi_setup(s, AST2600_OPB_FSI1_BASE_ADDR);
+
+    test_fsi_reg_change(s, ASPEED_FSI_OPB1_RW_DIRECTION, 0xF3F4F514);
+    test_fsi_reg_change(s, ASPEED_FSI_OPB1_XFER_SIZE, 0xF3F4F518);
+    test_fsi_reg_change(s, ASPEED_FSI_OPB1_BUS_ADDR, 0xF3F4F51c);
+    test_fsi_reg_change(s, ASPEED_FSI_INTRRUPT_CLEAR, 0xF3F4F540);
+    test_fsi_reg_change(s, ASPEED_FSI_INTRRUPT_STATUS, 0xF3F4F548);
+    test_fsi_reg_change(s, ASPEED_FSI_OPB1_BUS_STATUS, 0xF3F4F580);
+    test_fsi_reg_change(s, ASPEED_FSI_OPB1_READ_DATA, 0xF3F4F584);
+}
+
+static void test_fsi0_getcfam_addr0(const void *data)
+{
+    QTestState *s = (QTestState *)data;
+    uint32_t curval;
+
+    test_fsi_setup(s, AST2600_OPB_FSI0_BASE_ADDR);
+
+    /* Master access direction read */
+    aspeed_fsi_writel(s, ASPEED_FSI_OPB0_RW_DIRECTION, 0x1);
+    /* word */
+    aspeed_fsi_writel(s, ASPEED_FSI_OPB0_XFER_SIZE, 0x3);
+    /* Address */
+    aspeed_fsi_writel(s, ASPEED_FSI_OPB0_BUS_ADDR, 0xa0000000);
+    aspeed_fsi_writel(s, ASPEED_FSI_INTRRUPT_CLEAR, 0x1);
+    aspeed_fsi_writel(s, ASPEED_FSI_ENGINER_TRIGGER, 0x1);
+
+    curval = aspeed_fsi_readl(s, ASPEED_FSI_INTRRUPT_STATUS);
+    g_assert_cmpuint(curval, ==, 0x10000);
+    curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_BUS_STATUS);
+    g_assert_cmpuint(curval, ==, 0x0);
+    curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_READ_DATA);
+    g_assert_cmpuint(curval, ==, 0x152d02c0);
+}
+
+static void test_fsi1_getcfam_addr0(const void *data)
+{
+    QTestState *s = (QTestState *)data;
+    uint32_t curval;
+
+    test_fsi_setup(s, AST2600_OPB_FSI1_BASE_ADDR);
+
+    /* Master access direction read */
+    aspeed_fsi_writel(s, ASPEED_FSI_OPB1_RW_DIRECTION, 0x1);
+
+    aspeed_fsi_writel(s, ASPEED_FSI_OPB1_XFER_SIZE, 0x3);
+    aspeed_fsi_writel(s, ASPEED_FSI_OPB1_BUS_ADDR, 0xa0000000);
+    aspeed_fsi_writel(s, ASPEED_FSI_INTRRUPT_CLEAR, 0x1);
+    aspeed_fsi_writel(s, ASPEED_FSI_ENGINER_TRIGGER, 0x1);
+
+    curval = aspeed_fsi_readl(s, ASPEED_FSI_INTRRUPT_STATUS);
+    g_assert_cmpuint(curval, ==, 0x20000);
+    curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_BUS_STATUS);
+    g_assert_cmpuint(curval, ==, 0x0);
+    curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_READ_DATA);
+    g_assert_cmpuint(curval, ==, 0x152d02c0);
+}
+
+int main(int argc, char **argv)
+{
+    int ret = -1;
+    QTestState *s;
+
+    g_test_init(&argc, &argv, NULL);
+
+    s = qtest_init("-machine ast2600-evb ");
+    if (s == NULL) {
+        return -ENOMEM;
+    }
+
+    /* Tests for OPB/FSI0 */
+    qtest_add_data_func("/fsi-test/test_fsi0_master_regs", s,
+                        test_fsi0_master_regs);
+
+    qtest_add_data_func("/fsi-test/test_fsi0_getcfam_addr0", s,
+                        test_fsi0_getcfam_addr0);
+
+    /* Tests for OPB/FSI1 */
+    qtest_add_data_func("/fsi-test/test_fsi1_master_regs", s,
+                        test_fsi1_master_regs);
+
+    qtest_add_data_func("/fsi-test/test_fsi1_getcfam_addr0", s,
+                        test_fsi1_getcfam_addr0);
+
+    ret = g_test_run();
+    qtest_quit(s);
+
+    return ret;
+}
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index b071d400b3..5976081b44 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -207,6 +207,7 @@ qtests_arm = \
   (config_all_devices.has_key('CONFIG_TPM_TIS_I2C') ? ['tpm-tis-i2c-test'] : []) + \
   (config_all_devices.has_key('CONFIG_VEXPRESS') ? ['test-arm-mptimer'] : []) + \
   (config_all_devices.has_key('CONFIG_MICROBIT') ? ['microbit-test'] : []) + \
+  (config_all_devices.has_key('CONFIG_FSI_APB2OPB_ASPEED') ? ['fsi-test'] : []) + \
   ['arm-cpu-features',
    'boot-serial-test']
 
@@ -318,6 +319,7 @@ qtests = {
   'tpm-tis-device-test': [io, tpmemu_files, 'tpm-tis-util.c'],
   'vmgenid-test': files('boot-sector.c', 'acpi-utils.c'),
   'netdev-socket': files('netdev-socket.c', '../unit/socket-helpers.c'),
+  'fsi-test': files('fsi-test.c'),
 }
 
 if vnc.found()
-- 
2.39.2