[Stable-7.2.6 25/37] hw/ide/core: set ERR_STAT in unsupported command completion

[Michael Tokarev <mjt@tls.msk.ru>]

From: Niklas Cassel <niklas.cassel@wdc.com>

Currently, the first time sending an unsupported command
(e.g. READ LOG DMA EXT) will not have ERR_STAT set in the completion.
Sending the unsupported command again, will correctly have ERR_STAT set.

When ide_cmd_permitted() returns false, it calls ide_abort_command().
ide_abort_command() first calls ide_transfer_stop(), which will call
ide_transfer_halt() and ide_cmd_done(), after that ide_abort_command()
sets ERR_STAT in status.

ide_cmd_done() for AHCI will call ahci_write_fis_d2h() which writes the
current status in the FIS, and raises an IRQ. (The status here will not
have ERR_STAT set!).

Thus, we cannot call ide_transfer_stop() before setting ERR_STAT, as
ide_transfer_stop() will result in the FIS being written and an IRQ
being raised.

The reason why it works the second time, is that ERR_STAT will still
be set from the previous command, so when writing the FIS, the
completion will correctly have ERR_STAT set.

Set ERR_STAT before writing the FIS (calling cmd_done), so that we will
raise an error IRQ correctly when receiving an unsupported command.

Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230609140844.202795-3-nks@flawful.org
Signed-off-by: John Snow <jsnow@redhat.com>
(cherry picked from commit c3461c6264a7c8ca15b117e91fe5da786924a784)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

diff --git a/hw/ide/core.c b/hw/ide/core.c
index 39afdc0006..79c5529975 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -530,9 +530,9 @@ BlockAIOCB *ide_issue_trim(
 
 void ide_abort_command(IDEState *s)
 {
-    ide_transfer_stop(s);
     s->status = READY_STAT | ERR_STAT;
     s->error = ABRT_ERR;
+    ide_transfer_stop(s);
 }
 
 static void ide_set_retry(IDEState *s)
-- 
2.39.2