qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: philmd@linaro.org, anjo@rev.ng
Subject: [PATCH v3 02/39] accel/tcg: Move CPUTLB definitions from cpu-defs.h
Date: Sat, 16 Sep 2023 14:40:46 -0700	[thread overview]
Message-ID: <20230916214123.525796-3-richard.henderson@linaro.org> (raw)
In-Reply-To: <20230916214123.525796-1-richard.henderson@linaro.org>

Accept that we will consume space in CPUState for CONFIG_USER_ONLY,
since we cannot test CONFIG_SOFTMMU within hw/core/cpu.h.

Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 include/exec/cpu-defs.h | 150 ----------------------------------------
 include/hw/core/cpu.h   | 141 +++++++++++++++++++++++++++++++++++++
 2 files changed, 141 insertions(+), 150 deletions(-)

diff --git a/include/exec/cpu-defs.h b/include/exec/cpu-defs.h
index 46d2ac570f..3915438b83 100644
--- a/include/exec/cpu-defs.h
+++ b/include/exec/cpu-defs.h
@@ -54,18 +54,7 @@
 
 #include "exec/target_long.h"
 
-/*
- * Fix the number of mmu modes to 16, which is also the maximum
- * supported by the softmmu tlb api.
- */
-#define NB_MMU_MODES 16
-
 #if defined(CONFIG_SOFTMMU) && defined(CONFIG_TCG)
-#include "exec/tlb-common.h"
-
-/* use a fully associative victim tlb of 8 entries */
-#define CPU_VTLB_SIZE 8
-
 #define CPU_TLB_DYN_MIN_BITS 6
 #define CPU_TLB_DYN_DEFAULT_BITS 8
 
@@ -91,143 +80,4 @@
 
 #endif /* CONFIG_SOFTMMU && CONFIG_TCG */
 
-#if defined(CONFIG_SOFTMMU)
-/*
- * The full TLB entry, which is not accessed by generated TCG code,
- * so the layout is not as critical as that of CPUTLBEntry. This is
- * also why we don't want to combine the two structs.
- */
-typedef struct CPUTLBEntryFull {
-    /*
-     * @xlat_section contains:
-     *  - For ram, an offset which must be added to the virtual address
-     *    to obtain the ram_addr_t of the target RAM
-     *  - For other memory regions,
-     *     + in the lower TARGET_PAGE_BITS, the physical section number
-     *     + with the TARGET_PAGE_BITS masked off, the offset within
-     *       the target MemoryRegion
-     */
-    hwaddr xlat_section;
-
-    /*
-     * @phys_addr contains the physical address in the address space
-     * given by cpu_asidx_from_attrs(cpu, @attrs).
-     */
-    hwaddr phys_addr;
-
-    /* @attrs contains the memory transaction attributes for the page. */
-    MemTxAttrs attrs;
-
-    /* @prot contains the complete protections for the page. */
-    uint8_t prot;
-
-    /* @lg_page_size contains the log2 of the page size. */
-    uint8_t lg_page_size;
-
-    /*
-     * Additional tlb flags for use by the slow path. If non-zero,
-     * the corresponding CPUTLBEntry comparator must have TLB_FORCE_SLOW.
-     */
-    uint8_t slow_flags[MMU_ACCESS_COUNT];
-
-    /*
-     * Allow target-specific additions to this structure.
-     * This may be used to cache items from the guest cpu
-     * page tables for later use by the implementation.
-     */
-    union {
-        /*
-         * Cache the attrs and shareability fields from the page table entry.
-         *
-         * For ARMMMUIdx_Stage2*, pte_attrs is the S2 descriptor bits [5:2].
-         * Otherwise, pte_attrs is the same as the MAIR_EL1 8-bit format.
-         * For shareability and guarded, as in the SH and GP fields respectively
-         * of the VMSAv8-64 PTEs.
-         */
-        struct {
-            uint8_t pte_attrs;
-            uint8_t shareability;
-            bool guarded;
-        } arm;
-    } extra;
-} CPUTLBEntryFull;
-#endif /* CONFIG_SOFTMMU */
-
-#if defined(CONFIG_SOFTMMU) && defined(CONFIG_TCG)
-/*
- * Data elements that are per MMU mode, minus the bits accessed by
- * the TCG fast path.
- */
-typedef struct CPUTLBDesc {
-    /*
-     * Describe a region covering all of the large pages allocated
-     * into the tlb.  When any page within this region is flushed,
-     * we must flush the entire tlb.  The region is matched if
-     * (addr & large_page_mask) == large_page_addr.
-     */
-    vaddr large_page_addr;
-    vaddr large_page_mask;
-    /* host time (in ns) at the beginning of the time window */
-    int64_t window_begin_ns;
-    /* maximum number of entries observed in the window */
-    size_t window_max_entries;
-    size_t n_used_entries;
-    /* The next index to use in the tlb victim table.  */
-    size_t vindex;
-    /* The tlb victim table, in two parts.  */
-    CPUTLBEntry vtable[CPU_VTLB_SIZE];
-    CPUTLBEntryFull vfulltlb[CPU_VTLB_SIZE];
-    CPUTLBEntryFull *fulltlb;
-} CPUTLBDesc;
-
-/*
- * Data elements that are shared between all MMU modes.
- */
-typedef struct CPUTLBCommon {
-    /* Serialize updates to f.table and d.vtable, and others as noted. */
-    QemuSpin lock;
-    /*
-     * Within dirty, for each bit N, modifications have been made to
-     * mmu_idx N since the last time that mmu_idx was flushed.
-     * Protected by tlb_c.lock.
-     */
-    uint16_t dirty;
-    /*
-     * Statistics.  These are not lock protected, but are read and
-     * written atomically.  This allows the monitor to print a snapshot
-     * of the stats without interfering with the cpu.
-     */
-    size_t full_flush_count;
-    size_t part_flush_count;
-    size_t elide_flush_count;
-} CPUTLBCommon;
-
-/*
- * The entire softmmu tlb, for all MMU modes.
- * The meaning of each of the MMU modes is defined in the target code.
- * Since this is placed within CPUNegativeOffsetState, the smallest
- * negative offsets are at the end of the struct.
- */
-
-typedef struct CPUTLB {
-    CPUTLBCommon c;
-    CPUTLBDesc d[NB_MMU_MODES];
-    CPUTLBDescFast f[NB_MMU_MODES];
-} CPUTLB;
-
-#else
-
-typedef struct CPUTLB { } CPUTLB;
-
-#endif /* CONFIG_SOFTMMU && CONFIG_TCG */
-
-/*
- * This structure must be placed in ArchCPU immediately
- * before CPUArchState, as a field named "neg".
- */
-typedef struct CPUNegativeOffsetState {
-    CPUTLB tlb;
-    IcountDecr icount_decr;
-} CPUNegativeOffsetState;
-
 #endif
diff --git a/include/hw/core/cpu.h b/include/hw/core/cpu.h
index 648b5b3586..04baa5063c 100644
--- a/include/hw/core/cpu.h
+++ b/include/hw/core/cpu.h
@@ -25,6 +25,7 @@
 #include "exec/cpu-common.h"
 #include "exec/hwaddr.h"
 #include "exec/memattrs.h"
+#include "exec/tlb-common.h"
 #include "qapi/qapi-types-run-state.h"
 #include "qemu/bitmap.h"
 #include "qemu/rcu_queue.h"
@@ -192,6 +193,137 @@ struct CPUClass {
     bool gdb_stop_before_watchpoint;
 };
 
+/*
+ * Fix the number of mmu modes to 16, which is also the maximum
+ * supported by the softmmu tlb api.
+ */
+#define NB_MMU_MODES 16
+
+/* Use a fully associative victim tlb of 8 entries. */
+#define CPU_VTLB_SIZE 8
+
+/*
+ * The full TLB entry, which is not accessed by generated TCG code,
+ * so the layout is not as critical as that of CPUTLBEntry. This is
+ * also why we don't want to combine the two structs.
+ */
+typedef struct CPUTLBEntryFull {
+    /*
+     * @xlat_section contains:
+     *  - in the lower TARGET_PAGE_BITS, a physical section number
+     *  - with the lower TARGET_PAGE_BITS masked off, an offset which
+     *    must be added to the virtual address to obtain:
+     *     + the ram_addr_t of the target RAM (if the physical section
+     *       number is PHYS_SECTION_NOTDIRTY or PHYS_SECTION_ROM)
+     *     + the offset within the target MemoryRegion (otherwise)
+     */
+    hwaddr xlat_section;
+
+    /*
+     * @phys_addr contains the physical address in the address space
+     * given by cpu_asidx_from_attrs(cpu, @attrs).
+     */
+    hwaddr phys_addr;
+
+    /* @attrs contains the memory transaction attributes for the page. */
+    MemTxAttrs attrs;
+
+    /* @prot contains the complete protections for the page. */
+    uint8_t prot;
+
+    /* @lg_page_size contains the log2 of the page size. */
+    uint8_t lg_page_size;
+
+    /*
+     * Additional tlb flags for use by the slow path. If non-zero,
+     * the corresponding CPUTLBEntry comparator must have TLB_FORCE_SLOW.
+     */
+    uint8_t slow_flags[MMU_ACCESS_COUNT];
+
+    /*
+     * Allow target-specific additions to this structure.
+     * This may be used to cache items from the guest cpu
+     * page tables for later use by the implementation.
+     */
+    union {
+        /*
+         * Cache the attrs and shareability fields from the page table entry.
+         *
+         * For ARMMMUIdx_Stage2*, pte_attrs is the S2 descriptor bits [5:2].
+         * Otherwise, pte_attrs is the same as the MAIR_EL1 8-bit format.
+         * For shareability and guarded, as in the SH and GP fields respectively
+         * of the VMSAv8-64 PTEs.
+         */
+        struct {
+            uint8_t pte_attrs;
+            uint8_t shareability;
+            bool guarded;
+        } arm;
+    } extra;
+} CPUTLBEntryFull;
+
+/*
+ * Data elements that are per MMU mode, minus the bits accessed by
+ * the TCG fast path.
+ */
+typedef struct CPUTLBDesc {
+    /*
+     * Describe a region covering all of the large pages allocated
+     * into the tlb.  When any page within this region is flushed,
+     * we must flush the entire tlb.  The region is matched if
+     * (addr & large_page_mask) == large_page_addr.
+     */
+    vaddr large_page_addr;
+    vaddr large_page_mask;
+    /* host time (in ns) at the beginning of the time window */
+    int64_t window_begin_ns;
+    /* maximum number of entries observed in the window */
+    size_t window_max_entries;
+    size_t n_used_entries;
+    /* The next index to use in the tlb victim table.  */
+    size_t vindex;
+    /* The tlb victim table, in two parts.  */
+    CPUTLBEntry vtable[CPU_VTLB_SIZE];
+    CPUTLBEntryFull vfulltlb[CPU_VTLB_SIZE];
+    CPUTLBEntryFull *fulltlb;
+} CPUTLBDesc;
+
+/*
+ * Data elements that are shared between all MMU modes.
+ */
+typedef struct CPUTLBCommon {
+    /* Serialize updates to f.table and d.vtable, and others as noted. */
+    QemuSpin lock;
+    /*
+     * Within dirty, for each bit N, modifications have been made to
+     * mmu_idx N since the last time that mmu_idx was flushed.
+     * Protected by tlb_c.lock.
+     */
+    uint16_t dirty;
+    /*
+     * Statistics.  These are not lock protected, but are read and
+     * written atomically.  This allows the monitor to print a snapshot
+     * of the stats without interfering with the cpu.
+     */
+    size_t full_flush_count;
+    size_t part_flush_count;
+    size_t elide_flush_count;
+} CPUTLBCommon;
+
+/*
+ * The entire softmmu tlb, for all MMU modes.
+ * The meaning of each of the MMU modes is defined in the target code.
+ * Since this is placed within CPUNegativeOffsetState, the smallest
+ * negative offsets are at the end of the struct.
+ */
+typedef struct CPUTLB {
+#ifdef CONFIG_TCG
+    CPUTLBCommon c;
+    CPUTLBDesc d[NB_MMU_MODES];
+    CPUTLBDescFast f[NB_MMU_MODES];
+#endif
+} CPUTLB;
+
 /*
  * Low 16 bits: number of cycles left, used only in icount mode.
  * High 16 bits: Set to -1 to force TCG to stop executing linked TBs
@@ -212,6 +344,15 @@ typedef union IcountDecr {
     } u16;
 } IcountDecr;
 
+/*
+ * This structure must be placed in ArchCPU immediately
+ * before CPUArchState, as a field named "neg".
+ */
+typedef struct CPUNegativeOffsetState {
+    CPUTLB tlb;
+    IcountDecr icount_decr;
+} CPUNegativeOffsetState;
+
 typedef struct CPUBreakpoint {
     vaddr pc;
     int flags; /* BP_* */
-- 
2.34.1



  parent reply	other threads:[~2023-09-16 21:44 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-16 21:40 [PATCH v3 00/39] target agnostic cleanups Richard Henderson
2023-09-16 21:40 ` [PATCH v3 01/39] target/arm: Replace TARGET_PAGE_ENTRY_EXTRA Richard Henderson
2023-09-16 21:40 ` Richard Henderson [this message]
2023-09-16 21:40 ` [PATCH v3 03/39] qom: Propagate alignment through type system Richard Henderson
2023-09-16 21:40 ` [PATCH v3 04/39] target/arm: Remove size and alignment for cpu subclasses Richard Henderson
2023-09-16 21:40 ` [PATCH v3 05/39] target/*: Add instance_align to all cpu base classes Richard Henderson
2023-09-16 21:40 ` [PATCH v3 06/39] accel/tcg: Validate placement of CPUNegativeOffsetState Richard Henderson
2023-09-16 21:40 ` [PATCH v3 07/39] accel/tcg: Move CPUNegativeOffsetState into CPUState Richard Henderson
2023-09-16 21:40 ` [PATCH v3 08/39] accel/tcg: Remove CPUState.icount_decr_ptr Richard Henderson
2023-09-16 21:40 ` [PATCH v3 09/39] accel/tcg: Move can_do_io to CPUNegativeOffsetState Richard Henderson
2023-09-16 21:40 ` [PATCH v3 10/39] accel/tcg: Remove cpu_neg() Richard Henderson
2023-09-16 21:40 ` [PATCH v3 11/39] tcg: Rename cpu_env to tcg_env Richard Henderson
2023-09-16 21:40 ` [PATCH v3 12/39] accel/tcg: Replace CPUState.env_ptr with cpu_env() Richard Henderson
2023-09-16 21:40 ` [PATCH v3 13/39] accel/tcg: Remove cpu_set_cpustate_pointers Richard Henderson
2023-09-16 21:40 ` [PATCH v3 14/39] accel/tcg: Remove env_neg() Richard Henderson
2023-09-19  9:40   ` Philippe Mathieu-Daudé
2023-09-16 21:40 ` [PATCH v3 15/39] tcg: Remove TCGContext.tlb_fast_offset Richard Henderson
2023-09-16 21:41 ` [PATCH v3 16/39] accel/tcg: Modify tlb_*() to use CPUState Richard Henderson
2023-09-19  9:39   ` Philippe Mathieu-Daudé
2023-09-16 21:41 ` [PATCH v3 17/39] accel/tcg: Modify probe_access_internal() " Richard Henderson
2023-09-16 21:41 ` [PATCH v3 18/39] accel/tcg: Modify memory access functions " Richard Henderson
2023-09-16 21:41 ` [PATCH v3 19/39] accel/tcg: Modify atomic_mmu_lookup() " Richard Henderson
2023-09-16 21:41 ` [PATCH v3 20/39] accel/tcg: Use CPUState in atomicity helpers Richard Henderson
2023-09-16 21:41 ` [PATCH v3 21/39] accel/tcg: Remove env_tlb() Richard Henderson
2023-09-19  9:45   ` Philippe Mathieu-Daudé
2023-09-16 21:41 ` [PATCH v3 22/39] accel/tcg: Unify user and softmmu do_[st|ld]*_mmu() Richard Henderson
2023-09-16 21:41 ` [PATCH v3 23/39] accel/tcg: move ld/st helpers to ldst_common.c.inc Richard Henderson
2023-09-16 21:41 ` [PATCH v3 24/39] exec: Make EXCP_FOO definitions target agnostic Richard Henderson
2023-09-16 21:41 ` [PATCH v3 25/39] exec: Move cpu_loop_foo() target agnostic functions to 'cpu-common.h' Richard Henderson
2023-09-16 21:41 ` [PATCH v3 26/39] accel/tcg: Restrict dump_exec_info() declaration Richard Henderson
2023-09-16 21:41 ` [PATCH v3 27/39] accel: Make accel-blocker.o target agnostic Richard Henderson
2023-09-16 21:41 ` [PATCH v3 28/39] accel: Rename accel-common.c -> accel-target.c Richard Henderson
2023-09-16 21:41 ` [PATCH v3 29/39] exec: Rename cpu.c -> cpu-target.c Richard Henderson
2023-09-16 21:41 ` [PATCH v3 30/39] exec: Rename target specific page-vary.c -> page-vary-target.c Richard Henderson
2023-09-16 21:41 ` [PATCH v3 31/39] accel/tcg: Rename target-specific 'internal.h' -> 'internal-target.h' Richard Henderson
2023-09-16 21:41 ` [PATCH v3 32/39] accel/tcg: Make monitor.c a target-agnostic unit Richard Henderson
2023-09-16 21:41 ` [PATCH v3 33/39] accel/tcg: Make icount.o a target agnostic unit Richard Henderson
2023-09-16 21:41 ` [PATCH v3 34/39] accel/tcg: Make cpu-exec-common.c " Richard Henderson
2023-09-16 21:41 ` [PATCH v3 35/39] accel: Rename accel_cpu_realizefn() -> accel_cpu_realize() Richard Henderson
2023-09-16 21:41 ` [PATCH v3 36/39] accel: Introduce accel_cpu_unrealize() stub Richard Henderson
2023-09-18  8:12   ` Philippe Mathieu-Daudé
2023-09-16 21:41 ` [PATCH v3 37/39] accel: Declare AccelClass::[un]realize_cpu() handlers Richard Henderson
2023-09-16 21:41 ` [PATCH v3 38/39] accel/tcg: Have tcg_exec_realizefn() return a boolean Richard Henderson
2023-09-16 21:41 ` [PATCH v3 39/39] accel/tcg: Restrict tcg_exec_[un]realizefn() to TCG Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230916214123.525796-3-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=anjo@rev.ng \
    --cc=philmd@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).