[PATCH v4 1/4] docs/qcow2: add the zoned format feature

[Sam Li <faithilikerun@gmail.com>]

Add the specs for the zoned format feature of the qcow2 driver.
The qcow2 file can be taken as zoned device and passed through by
virtio-blk device or NVMe ZNS device to the guest given zoned
information.

Signed-off-by: Sam Li <faithilikerun@gmail.com>
---
 docs/system/qemu-block-drivers.rst.inc | 33 ++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/docs/system/qemu-block-drivers.rst.inc b/docs/system/qemu-block-drivers.rst.inc
index 105cb9679c..4647c5fa29 100644
--- a/docs/system/qemu-block-drivers.rst.inc
+++ b/docs/system/qemu-block-drivers.rst.inc
@@ -172,6 +172,39 @@ This section describes each format and the options that are supported for it.
     filename`` to check if the NOCOW flag is set or not (Capital 'C' is
     NOCOW flag).
 
+  .. option:: zoned
+    1 for host-managed zoned device and 0 for a non-zoned device.
+
+  .. option:: zone_size
+
+    The size of a zone in bytes. The device is divided into zones of this
+    size with the exception of the last zone, which may be smaller.
+
+  .. option:: zone_capacity
+
+    The initial capacity value, in bytes, for all zones. The capacity must
+    be less than or equal to zone size. If the last zone is smaller, then
+    its capacity is capped.
+
+    The zone capacity is per zone and may be different between zones in real
+    devices. For simplicity, QCow2 sets all zones to the same capacity.
+
+  .. option:: zone_nr_conv
+
+    The number of conventional zones of the zoned device.
+
+  .. option:: max_open_zones
+
+    The maximal allowed open zones.
+
+  .. option:: max_active_zones
+
+    The limit of the zones with implicit open, explicit open or closed state.
+
+  .. option:: max_append_sectors
+
+    The maximal number of 512-byte sectors in a zone append request.
+
 .. program:: image-formats
 .. option:: qed
 
-- 
2.40.1