[PATCH 33/52] migration/rdma: Drop "@errp is clear" guards around error_setg()

[Markus Armbruster <armbru@redhat.com>]

These guards are all redundant now.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 migration/rdma.c | 164 +++++++++++++++--------------------------------
 1 file changed, 51 insertions(+), 113 deletions(-)

diff --git a/migration/rdma.c b/migration/rdma.c
index d29affe410..c88cd1f468 100644
--- a/migration/rdma.c
+++ b/migration/rdma.c
@@ -852,10 +852,8 @@ static int qemu_rdma_broken_ipv6_kernel(struct ibv_context *verbs, Error **errp)
 
             if (ibv_query_port(verbs, 1, &port_attr)) {
                 ibv_close_device(verbs);
-                if (errp && !*errp) {
-                    error_setg(errp,
-                               "RDMA ERROR: Could not query initial IB port");
-                }
+                error_setg(errp,
+                           "RDMA ERROR: Could not query initial IB port");
                 return -1;
             }
 
@@ -878,12 +876,10 @@ static int qemu_rdma_broken_ipv6_kernel(struct ibv_context *verbs, Error **errp)
                                 " migrate over the IB fabric until the kernel "
                                 " fixes the bug.\n");
             } else {
-                if (errp && !*errp) {
-                    error_setg(errp, "RDMA ERROR: "
-                               "You only have RoCE / iWARP devices in your systems"
-                               " and your management software has specified '[::]'"
-                               ", but IPv6 over RoCE / iWARP is not supported in Linux.");
-                }
+                error_setg(errp, "RDMA ERROR: "
+                           "You only have RoCE / iWARP devices in your systems"
+                           " and your management software has specified '[::]'"
+                           ", but IPv6 over RoCE / iWARP is not supported in Linux.");
                 return -1;
             }
         }
@@ -899,18 +895,14 @@ static int qemu_rdma_broken_ipv6_kernel(struct ibv_context *verbs, Error **errp)
 
     /* IB ports start with 1, not 0 */
     if (ibv_query_port(verbs, 1, &port_attr)) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: Could not query initial IB port");
-        }
+        error_setg(errp, "RDMA ERROR: Could not query initial IB port");
         return -1;
     }
 
     if (port_attr.link_layer == IBV_LINK_LAYER_ETHERNET) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: "
-                       "Linux kernel's RoCE / iWARP does not support IPv6 "
-                       "(but patches on linux-rdma in progress)");
-        }
+        error_setg(errp, "RDMA ERROR: "
+                   "Linux kernel's RoCE / iWARP does not support IPv6 "
+                   "(but patches on linux-rdma in progress)");
         return -1;
     }
 
@@ -935,27 +927,21 @@ static int qemu_rdma_resolve_host(RDMAContext *rdma, Error **errp)
     struct rdma_addrinfo *e;
 
     if (rdma->host == NULL || !strcmp(rdma->host, "")) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: RDMA hostname has not been set");
-        }
+        error_setg(errp, "RDMA ERROR: RDMA hostname has not been set");
         return -1;
     }
 
     /* create CM channel */
     rdma->channel = rdma_create_event_channel();
     if (!rdma->channel) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: could not create CM channel");
-        }
+        error_setg(errp, "RDMA ERROR: could not create CM channel");
         return -1;
     }
 
     /* create CM id */
     ret = rdma_create_id(rdma->channel, &rdma->cm_id, NULL, RDMA_PS_TCP);
     if (ret < 0) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: could not create channel id");
-        }
+        error_setg(errp, "RDMA ERROR: could not create channel id");
         goto err_resolve_create_id;
     }
 
@@ -964,10 +950,8 @@ static int qemu_rdma_resolve_host(RDMAContext *rdma, Error **errp)
 
     ret = rdma_getaddrinfo(rdma->host, port_str, NULL, &res);
     if (ret) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: could not rdma_getaddrinfo address %s",
-                       rdma->host);
-        }
+        error_setg(errp, "RDMA ERROR: could not rdma_getaddrinfo address %s",
+                   rdma->host);
         goto err_resolve_get_addr;
     }
 
@@ -1009,18 +993,14 @@ route:
 
     ret = rdma_get_cm_event(rdma->channel, &cm_event);
     if (ret < 0) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: could not perform event_addr_resolved");
-        }
+        error_setg(errp, "RDMA ERROR: could not perform event_addr_resolved");
         goto err_resolve_get_addr;
     }
 
     if (cm_event->event != RDMA_CM_EVENT_ADDR_RESOLVED) {
-        if (errp && !*errp) {
-            error_setg(errp,
-                       "RDMA ERROR: result not equal to event_addr_resolved %s",
-                       rdma_event_str(cm_event->event));
-        }
+        error_setg(errp,
+                   "RDMA ERROR: result not equal to event_addr_resolved %s",
+                   rdma_event_str(cm_event->event));
         error_report("rdma_resolve_addr");
         rdma_ack_cm_event(cm_event);
         goto err_resolve_get_addr;
@@ -1030,25 +1010,19 @@ route:
     /* resolve route */
     ret = rdma_resolve_route(rdma->cm_id, RDMA_RESOLVE_TIMEOUT_MS);
     if (ret < 0) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: could not resolve rdma route");
-        }
+        error_setg(errp, "RDMA ERROR: could not resolve rdma route");
         goto err_resolve_get_addr;
     }
 
     ret = rdma_get_cm_event(rdma->channel, &cm_event);
     if (ret < 0) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: could not perform event_route_resolved");
-        }
+        error_setg(errp, "RDMA ERROR: could not perform event_route_resolved");
         goto err_resolve_get_addr;
     }
     if (cm_event->event != RDMA_CM_EVENT_ROUTE_RESOLVED) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: "
-                       "result not equal to event_route_resolved: %s",
-                       rdma_event_str(cm_event->event));
-        }
+        error_setg(errp, "RDMA ERROR: "
+                   "result not equal to event_route_resolved: %s",
+                   rdma_event_str(cm_event->event));
         rdma_ack_cm_event(cm_event);
         goto err_resolve_get_addr;
     }
@@ -2479,20 +2453,16 @@ static int qemu_rdma_source_init(RDMAContext *rdma, bool pin_all, Error **errp)
 
     ret = qemu_rdma_alloc_pd_cq(rdma);
     if (ret < 0) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: "
-                       "rdma migration: error allocating pd and cq! Your mlock()"
-                       " limits may be too low. Please check $ ulimit -a # and "
-                       "search for 'ulimit -l' in the output");
-        }
+        error_setg(errp, "RDMA ERROR: "
+                   "rdma migration: error allocating pd and cq! Your mlock()"
+                   " limits may be too low. Please check $ ulimit -a # and "
+                   "search for 'ulimit -l' in the output");
         goto err_rdma_source_init;
     }
 
     ret = qemu_rdma_alloc_qp(rdma);
     if (ret < 0) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: rdma migration: error allocating qp!");
-        }
+        error_setg(errp, "RDMA ERROR: rdma migration: error allocating qp!");
         goto err_rdma_source_init;
     }
 
@@ -2509,11 +2479,9 @@ static int qemu_rdma_source_init(RDMAContext *rdma, bool pin_all, Error **errp)
     for (idx = 0; idx < RDMA_WRID_MAX; idx++) {
         ret = qemu_rdma_reg_control(rdma, idx);
         if (ret < 0) {
-            if (errp && !*errp) {
-                error_setg(errp,
-                           "RDMA ERROR: rdma migration: error registering %d control!",
-                           idx);
-            }
+            error_setg(errp,
+                       "RDMA ERROR: rdma migration: error registering %d control!",
+                       idx);
             goto err_rdma_source_init;
         }
     }
@@ -2541,29 +2509,21 @@ static int qemu_get_cm_event_timeout(RDMAContext *rdma,
     } while (ret < 0 && errno == EINTR);
 
     if (ret == 0) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: poll cm event timeout");
-        }
+        error_setg(errp, "RDMA ERROR: poll cm event timeout");
         return -1;
     } else if (ret < 0) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: failed to poll cm event, errno=%i",
-                       errno);
-        }
+        error_setg(errp, "RDMA ERROR: failed to poll cm event, errno=%i",
+                   errno);
         return -1;
     } else if (poll_fd.revents & POLLIN) {
         if (rdma_get_cm_event(rdma->channel, cm_event) < 0) {
-            if (errp && !*errp) {
-                error_setg(errp, "RDMA ERROR: failed to get cm event");
-            }
+            error_setg(errp, "RDMA ERROR: failed to get cm event");
             return -1;
         }
         return 0;
     } else {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: no POLLIN event, revent=%x",
-                       poll_fd.revents);
-        }
+        error_setg(errp, "RDMA ERROR: no POLLIN event, revent=%x",
+                   poll_fd.revents);
         return -1;
     }
 }
@@ -2596,18 +2556,14 @@ static int qemu_rdma_connect(RDMAContext *rdma, bool return_path,
 
     ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY);
     if (ret < 0) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: posting second control recv");
-        }
+        error_setg(errp, "RDMA ERROR: posting second control recv");
         goto err_rdma_source_connect;
     }
 
     ret = rdma_connect(rdma->cm_id, &conn_param);
     if (ret < 0) {
         perror("rdma_connect");
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: connecting to destination!");
-        }
+        error_setg(errp, "RDMA ERROR: connecting to destination!");
         goto err_rdma_source_connect;
     }
 
@@ -2616,9 +2572,7 @@ static int qemu_rdma_connect(RDMAContext *rdma, bool return_path,
     } else {
         ret = rdma_get_cm_event(rdma->channel, &cm_event);
         if (ret < 0) {
-            if (errp && !*errp) {
-                error_setg(errp, "RDMA ERROR: failed to get cm event");
-            }
+            error_setg(errp, "RDMA ERROR: failed to get cm event");
         }
     }
     if (ret < 0) {
@@ -2628,9 +2582,7 @@ static int qemu_rdma_connect(RDMAContext *rdma, bool return_path,
 
     if (cm_event->event != RDMA_CM_EVENT_ESTABLISHED) {
         error_report("rdma_get_cm_event != EVENT_ESTABLISHED after rdma_connect");
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: connecting to destination!");
-        }
+        error_setg(errp, "RDMA ERROR: connecting to destination!");
         rdma_ack_cm_event(cm_event);
         goto err_rdma_source_connect;
     }
@@ -2678,18 +2630,14 @@ static int qemu_rdma_dest_init(RDMAContext *rdma, Error **errp)
     }
 
     if (!rdma->host || !rdma->host[0]) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: RDMA host is not set!");
-        }
+        error_setg(errp, "RDMA ERROR: RDMA host is not set!");
         rdma->errored = true;
         return -1;
     }
     /* create CM channel */
     rdma->channel = rdma_create_event_channel();
     if (!rdma->channel) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: could not create rdma event channel");
-        }
+        error_setg(errp, "RDMA ERROR: could not create rdma event channel");
         rdma->errored = true;
         return -1;
     }
@@ -2697,9 +2645,7 @@ static int qemu_rdma_dest_init(RDMAContext *rdma, Error **errp)
     /* create CM id */
     ret = rdma_create_id(rdma->channel, &listen_id, NULL, RDMA_PS_TCP);
     if (ret < 0) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: could not create cm_id!");
-        }
+        error_setg(errp, "RDMA ERROR: could not create cm_id!");
         goto err_dest_init_create_listen_id;
     }
 
@@ -2708,19 +2654,15 @@ static int qemu_rdma_dest_init(RDMAContext *rdma, Error **errp)
 
     ret = rdma_getaddrinfo(rdma->host, port_str, NULL, &res);
     if (ret) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: could not rdma_getaddrinfo address %s",
-                       rdma->host);
-        }
+        error_setg(errp, "RDMA ERROR: could not rdma_getaddrinfo address %s",
+                   rdma->host);
         goto err_dest_init_bind_addr;
     }
 
     ret = rdma_set_option(listen_id, RDMA_OPTION_ID, RDMA_OPTION_ID_REUSEADDR,
                           &reuse, sizeof reuse);
     if (ret < 0) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: Error: could not set REUSEADDR option");
-        }
+        error_setg(errp, "RDMA ERROR: Error: could not set REUSEADDR option");
         goto err_dest_init_bind_addr;
     }
 
@@ -2804,10 +2746,8 @@ static RDMAContext *qemu_rdma_data_init(const char *host_port, Error **errp)
         rdma->host = g_strdup(addr->host);
         rdma->host_port = g_strdup(host_port);
     } else {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: bad RDMA migration address '%s'",
-                       host_port);
-        }
+        error_setg(errp, "RDMA ERROR: bad RDMA migration address '%s'",
+                   host_port);
         g_free(rdma);
         rdma = NULL;
     }
@@ -4193,9 +4133,7 @@ void rdma_start_incoming_migration(const char *host_port, Error **errp)
     ret = rdma_listen(rdma->listen_id, 5);
 
     if (ret < 0) {
-        if (errp && !*errp) {
-            error_setg(errp, "RDMA ERROR: listening on socket!");
-        }
+        error_setg(errp, "RDMA ERROR: listening on socket!");
         goto cleanup_rdma;
     }
 
-- 
2.41.0