From: Fan Ni <fan.ni@samsung.com>
To: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: "Michael Tokarev" <mjt@tls.msk.ru>,
"qemu-devel@nongnu.org" <qemu-devel@nongnu.org>,
"Michael Tsirkin" <mst@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"linuxarm@huawei.com" <linuxarm@huawei.com>
Subject: Re: [PATCH v2 2/4] hw/cxl: Use switch statements for read and write of cachemem registers
Date: Mon, 18 Sep 2023 16:32:07 +0000 [thread overview]
Message-ID: <20230918163201.GA3330830@sjcvldevvm72> (raw)
In-Reply-To: <20230915170418.21337-3-Jonathan.Cameron@huawei.com>
On Fri, Sep 15, 2023 at 06:04:16PM +0100, Jonathan Cameron wrote:
> Establishing that only register accesses of size 4 and 8 can occur
> using these functions requires looking at their callers. Make it
> easier to see that by using switch statements.
> Assertions are used to enforce that the register storage is of the
> matching size, allowing fixed values to be used for divisors of
> the array indices.
>
> Suggested-by: Michael Tokarev <mjt@tls.msk.ru>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
Reviewed-by: Fan Ni <fan.ni@samsung.com>
> v2: Use switch statements. Note we coudl have renamed registers to make
> the sizes visible as is true of some other cases, but that felt odd
> as this is the only size these registers can be, so why call it out.
> The asserts do the same job.
> hw/cxl/cxl-component-utils.c | 65 +++++++++++++++++++++++-------------
> 1 file changed, 42 insertions(+), 23 deletions(-)
>
> diff --git a/hw/cxl/cxl-component-utils.c b/hw/cxl/cxl-component-utils.c
> index f3bbf0fd13..7ef3ef2bd6 100644
> --- a/hw/cxl/cxl-component-utils.c
> +++ b/hw/cxl/cxl-component-utils.c
> @@ -67,16 +67,24 @@ static uint64_t cxl_cache_mem_read_reg(void *opaque, hwaddr offset,
> CXLComponentState *cxl_cstate = opaque;
> ComponentRegisters *cregs = &cxl_cstate->crb;
>
> - if (size == 8) {
> + switch (size) {
> + case 4:
> + if (cregs->special_ops && cregs->special_ops->read) {
> + return cregs->special_ops->read(cxl_cstate, offset, 4);
> + } else {
> + static_assert(sizeof(*cregs->cache_mem_registers) == 4);
> + return cregs->cache_mem_registers[offset / 4];
> + }
> + case 8:
> qemu_log_mask(LOG_UNIMP,
> "CXL 8 byte cache mem registers not implemented\n");
> return 0;
> - }
> -
> - if (cregs->special_ops && cregs->special_ops->read) {
> - return cregs->special_ops->read(cxl_cstate, offset, size);
> - } else {
> - return cregs->cache_mem_registers[offset / sizeof(*cregs->cache_mem_registers)];
> + default:
> + /*
> + * In line with specifiction limitaions on access sizes, this
> + * routine is not called with other sizes.
> + */
> + g_assert_not_reached();
> }
> }
>
> @@ -117,25 +125,36 @@ static void cxl_cache_mem_write_reg(void *opaque, hwaddr offset, uint64_t value,
> ComponentRegisters *cregs = &cxl_cstate->crb;
> uint32_t mask;
>
> - if (size == 8) {
> + switch (size) {
> + case 4:
> + static_assert(sizeof(*cregs->cache_mem_regs_write_mask) == 4);
> + static_assert(sizeof(*cregs->cache_mem_registers) == 4);
> + mask = cregs->cache_mem_regs_write_mask[offset / 4];
> + value &= mask;
> + /* RO bits should remain constant. Done by reading existing value */
> + value |= ~mask & cregs->cache_mem_registers[offset / 4];
> + if (cregs->special_ops && cregs->special_ops->write) {
> + cregs->special_ops->write(cxl_cstate, offset, value, size);
> + return;
> + }
> +
> + if (offset >= A_CXL_HDM_DECODER_CAPABILITY &&
> + offset <= A_CXL_HDM_DECODER3_TARGET_LIST_HI) {
> + dumb_hdm_handler(cxl_cstate, offset, value);
> + } else {
> + cregs->cache_mem_registers[offset / 4] = value;
> + }
> + return;
> + case 8:
> qemu_log_mask(LOG_UNIMP,
> "CXL 8 byte cache mem registers not implemented\n");
> return;
> - }
> - mask = cregs->cache_mem_regs_write_mask[offset / sizeof(*cregs->cache_mem_regs_write_mask)];
> - value &= mask;
> - /* RO bits should remain constant. Done by reading existing value */
> - value |= ~mask & cregs->cache_mem_registers[offset / sizeof(*cregs->cache_mem_registers)];
> - if (cregs->special_ops && cregs->special_ops->write) {
> - cregs->special_ops->write(cxl_cstate, offset, value, size);
> - return;
> - }
> -
> - if (offset >= A_CXL_HDM_DECODER_CAPABILITY &&
> - offset <= A_CXL_HDM_DECODER3_TARGET_LIST_HI) {
> - dumb_hdm_handler(cxl_cstate, offset, value);
> - } else {
> - cregs->cache_mem_registers[offset / sizeof(*cregs->cache_mem_registers)] = value;
> + default:
> + /*
> + * In line with specifiction limitaions on access sizes, this
> + * routine is not called with other sizes.
> + */
> + g_assert_not_reached();
> }
> }
>
> --
> 2.39.2
>
next prev parent reply other threads:[~2023-09-18 16:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-15 17:04 [PATCH v2 0/4] hw/cxl: Line length reduction and related Jonathan Cameron via
2023-09-15 17:04 ` [PATCH v2 1/4] hw/cxl: Use a switch to explicitly check size in caps_reg_read() Jonathan Cameron via
2023-09-18 16:23 ` Fan Ni
2023-09-15 17:04 ` [PATCH v2 2/4] hw/cxl: Use switch statements for read and write of cachemem registers Jonathan Cameron via
2023-09-18 16:32 ` Fan Ni [this message]
2023-09-15 17:04 ` [PATCH v2 3/4] hw/cxl: CXLDVSECPortExtensions renamed to CXLDVSECPortExt Jonathan Cameron via
2023-09-18 16:34 ` Fan Ni
2023-09-15 17:04 ` [PATCH v2 4/4] hw/cxl: Line length reductions Jonathan Cameron via
2023-09-18 16:48 ` Fan Ni
2023-09-19 9:11 ` Jonathan Cameron via
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230918163201.GA3330830@sjcvldevvm72 \
--to=fan.ni@samsung.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=linuxarm@huawei.com \
--cc=mjt@tls.msk.ru \
--cc=mst@redhat.com \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).