From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Subject: [PULL 02/24] accel/kvm/kvm-all: Handle register access errors
Date: Tue, 3 Oct 2023 10:30:19 +0200 [thread overview]
Message-ID: <20231003083042.110065-3-pbonzini@redhat.com> (raw)
In-Reply-To: <20231003083042.110065-1-pbonzini@redhat.com>
From: Akihiko Odaki <akihiko.odaki@daynix.com>
A register access error typically means something seriously wrong
happened so that anything bad can happen after that and recovery is
impossible.
Even failing one register access is catastorophic as
architecture-specific code are not written so that it torelates such
failures.
Make sure the VM stop and nothing worse happens if such an error occurs.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20221201102728.69751-1-akihiko.odaki@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
accel/kvm/kvm-all.c | 32 ++++++++++++++++++++++++++++----
1 file changed, 28 insertions(+), 4 deletions(-)
diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c
index ff1578bb32b..72e1d1141c4 100644
--- a/accel/kvm/kvm-all.c
+++ b/accel/kvm/kvm-all.c
@@ -2851,7 +2851,13 @@ bool kvm_cpu_check_are_resettable(void)
static void do_kvm_cpu_synchronize_state(CPUState *cpu, run_on_cpu_data arg)
{
if (!cpu->vcpu_dirty) {
- kvm_arch_get_registers(cpu);
+ int ret = kvm_arch_get_registers(cpu);
+ if (ret) {
+ error_report("Failed to get registers: %s", strerror(-ret));
+ cpu_dump_state(cpu, stderr, CPU_DUMP_CODE);
+ vm_stop(RUN_STATE_INTERNAL_ERROR);
+ }
+
cpu->vcpu_dirty = true;
}
}
@@ -2865,7 +2871,13 @@ void kvm_cpu_synchronize_state(CPUState *cpu)
static void do_kvm_cpu_synchronize_post_reset(CPUState *cpu, run_on_cpu_data arg)
{
- kvm_arch_put_registers(cpu, KVM_PUT_RESET_STATE);
+ int ret = kvm_arch_put_registers(cpu, KVM_PUT_RESET_STATE);
+ if (ret) {
+ error_report("Failed to put registers after reset: %s", strerror(-ret));
+ cpu_dump_state(cpu, stderr, CPU_DUMP_CODE);
+ vm_stop(RUN_STATE_INTERNAL_ERROR);
+ }
+
cpu->vcpu_dirty = false;
}
@@ -2876,7 +2888,12 @@ void kvm_cpu_synchronize_post_reset(CPUState *cpu)
static void do_kvm_cpu_synchronize_post_init(CPUState *cpu, run_on_cpu_data arg)
{
- kvm_arch_put_registers(cpu, KVM_PUT_FULL_STATE);
+ int ret = kvm_arch_put_registers(cpu, KVM_PUT_FULL_STATE);
+ if (ret) {
+ error_report("Failed to put registers after init: %s", strerror(-ret));
+ exit(1);
+ }
+
cpu->vcpu_dirty = false;
}
@@ -2969,7 +2986,14 @@ int kvm_cpu_exec(CPUState *cpu)
MemTxAttrs attrs;
if (cpu->vcpu_dirty) {
- kvm_arch_put_registers(cpu, KVM_PUT_RUNTIME_STATE);
+ ret = kvm_arch_put_registers(cpu, KVM_PUT_RUNTIME_STATE);
+ if (ret) {
+ error_report("Failed to put registers after init: %s",
+ strerror(-ret));
+ ret = -1;
+ break;
+ }
+
cpu->vcpu_dirty = false;
}
--
2.41.0
next prev parent reply other threads:[~2023-10-03 8:37 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-03 8:30 [PULL 00/24] Audio, build system, misc fixes for 2023-10-03 Paolo Bonzini
2023-10-03 8:30 ` [PULL 01/24] optionrom: Remove build-id section Paolo Bonzini
2023-10-03 10:04 ` Michael Tokarev
2023-10-03 8:30 ` Paolo Bonzini [this message]
2023-10-03 8:30 ` [PULL 03/24] e1000: remove old compatibility code Paolo Bonzini
2023-10-03 8:30 ` [PULL 04/24] pc: remove short_root_bus property Paolo Bonzini
2023-10-03 8:30 ` [PULL 05/24] make-release: do not ship dtc sources Paolo Bonzini
2023-10-03 8:30 ` [PULL 06/24] meson: clean up static_library keyword arguments Paolo Bonzini
2023-10-03 8:30 ` [PULL 07/24] Makefile: build plugins before running TCG tests Paolo Bonzini
2023-10-03 8:30 ` [PULL 08/24] esp: use correct type for esp_dma_enable() in sysbus_esp_gpio_demux() Paolo Bonzini
2023-10-03 8:30 ` [PULL 09/24] esp: restrict non-DMA transfer length to that of available data Paolo Bonzini
2023-10-03 8:30 ` [PULL 10/24] scsi-disk: ensure that FORMAT UNIT commands are terminated Paolo Bonzini
2023-10-03 8:30 ` [PULL 11/24] crypto: only include tls-cipher-suites in emulators Paolo Bonzini
2023-10-03 8:30 ` [PULL 12/24] ui/vnc: Require audiodev= to enable audio Paolo Bonzini
2023-10-03 8:30 ` [PULL 13/24] audio: Require AudioState in AUD_add_capture Paolo Bonzini
2023-10-03 8:30 ` [PULL 14/24] audio: allow returning an error from the driver init Paolo Bonzini
2023-10-03 8:30 ` [PULL 15/24] audio: return Error ** from audio_state_by_name Paolo Bonzini
2023-10-03 8:30 ` [PULL 16/24] audio: commonize voice initialization Paolo Bonzini
2023-10-03 8:30 ` [PULL 17/24] audio: simplify flow in audio_init Paolo Bonzini
2023-10-03 8:30 ` [PULL 18/24] audio: remove QEMU_AUDIO_* and -audio-help support Paolo Bonzini
2023-10-03 8:30 ` [PULL 19/24] Introduce machine property "audiodev" Paolo Bonzini
2023-10-03 8:30 ` [PULL 20/24] hw/arm: Support machine-default audiodev with fallback Paolo Bonzini
2023-10-03 8:30 ` [PULL 21/24] hw/ppc: " Paolo Bonzini
2023-10-03 8:30 ` [PULL 22/24] vt82c686 machines: " Paolo Bonzini
2023-10-03 8:30 ` [PULL 23/24] audio: propagate Error * out of audio_init Paolo Bonzini
2023-10-03 8:30 ` [PULL 24/24] audio: forbid default audiodev backend with -nodefaults Paolo Bonzini
2023-10-03 14:43 ` [PULL 00/24] Audio, build system, misc fixes for 2023-10-03 Stefan Hajnoczi
2023-10-03 15:36 ` Michael Tokarev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231003083042.110065-3-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=akihiko.odaki@daynix.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).