qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Thomas Huth <thuth@redhat.com>
To: qemu-devel@nongnu.org, Gerd Hoffmann <kraxel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>, qemu-trivial@nongnu.org
Subject: [PATCH] hw/usb: Silence compiler warnings in USB code when compiling with -Wshadow
Date: Wed,  4 Oct 2023 11:36:20 +0200	[thread overview]
Message-ID: <20231004093620.97906-1-thuth@redhat.com> (raw)

Rename variables or remove nested definitions where it makes sense,
so that we can finally compile the USB code with "-Wshadow", too.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 hw/usb/desc.c        |  2 +-
 hw/usb/dev-hub.c     |  8 ++++----
 hw/usb/dev-storage.c |  6 +++---
 hw/usb/hcd-xhci.c    | 10 +++++-----
 4 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/hw/usb/desc.c b/hw/usb/desc.c
index 7f6cc2f99b..f2bdc05a95 100644
--- a/hw/usb/desc.c
+++ b/hw/usb/desc.c
@@ -227,7 +227,7 @@ int usb_desc_endpoint(const USBDescEndpoint *ep, int flags,
     }
 
     if (superlen) {
-        USBDescriptor *d = (void *)(dest + bLength);
+        d = (void *)(dest + bLength);
 
         d->bLength                       = 0x06;
         d->bDescriptorType               = USB_DT_ENDPOINT_COMPANION;
diff --git a/hw/usb/dev-hub.c b/hw/usb/dev-hub.c
index a6b50dbc8d..5703e0e826 100644
--- a/hw/usb/dev-hub.c
+++ b/hw/usb/dev-hub.c
@@ -402,7 +402,7 @@ static void usb_hub_handle_control(USBDevice *dev, USBPacket *p,
         {
             unsigned int n = index - 1;
             USBHubPort *port;
-            USBDevice *dev;
+            USBDevice *pdev;
 
             trace_usb_hub_set_port_feature(s->dev.addr, index,
                                            feature_name(value));
@@ -411,7 +411,7 @@ static void usb_hub_handle_control(USBDevice *dev, USBPacket *p,
                 goto fail;
             }
             port = &s->ports[n];
-            dev = port->port.dev;
+            pdev = port->port.dev;
             switch(value) {
             case PORT_SUSPEND:
                 port->wPortStatus |= PORT_STAT_SUSPEND;
@@ -419,8 +419,8 @@ static void usb_hub_handle_control(USBDevice *dev, USBPacket *p,
             case PORT_RESET:
                 usb_hub_port_set(port, PORT_STAT_RESET);
                 usb_hub_port_clear(port, PORT_STAT_RESET);
-                if (dev && dev->attached) {
-                    usb_device_reset(dev);
+                if (pdev && pdev->attached) {
+                    usb_device_reset(pdev);
                     usb_hub_port_set(port, PORT_STAT_ENABLE);
                 }
                 usb_wakeup(s->intr, 0);
diff --git a/hw/usb/dev-storage.c b/hw/usb/dev-storage.c
index e3bcffb3e0..a496c811a7 100644
--- a/hw/usb/dev-storage.c
+++ b/hw/usb/dev-storage.c
@@ -403,7 +403,7 @@ static void usb_msd_handle_data(USBDevice *dev, USBPacket *p)
     struct usb_msd_cbw cbw;
     uint8_t devep = p->ep->nr;
     SCSIDevice *scsi_dev;
-    uint32_t len;
+    int len;
 
     if (s->needs_reset) {
         p->status = USB_RET_STALL;
@@ -465,7 +465,7 @@ static void usb_msd_handle_data(USBDevice *dev, USBPacket *p)
                 usb_msd_copy_data(s, p);
             }
             if (le32_to_cpu(s->csw.residue)) {
-                int len = p->iov.size - p->actual_length;
+                len = p->iov.size - p->actual_length;
                 if (len) {
                     usb_packet_skip(p, len);
                     if (len > s->data_len) {
@@ -526,7 +526,7 @@ static void usb_msd_handle_data(USBDevice *dev, USBPacket *p)
                 usb_msd_copy_data(s, p);
             }
             if (le32_to_cpu(s->csw.residue)) {
-                int len = p->iov.size - p->actual_length;
+                len = p->iov.size - p->actual_length;
                 if (len) {
                     usb_packet_skip(p, len);
                     if (len > s->data_len) {
diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c
index 324177ad5d..4b60114207 100644
--- a/hw/usb/hcd-xhci.c
+++ b/hw/usb/hcd-xhci.c
@@ -217,10 +217,10 @@ enum {
     (((data) >> field##_SHIFT) & field##_MASK)
 
 #define set_field(data, newval, field) do {                     \
-        uint32_t val = *data;                                   \
-        val &= ~(field##_MASK << field##_SHIFT);                \
-        val |= ((newval) & field##_MASK) << field##_SHIFT;      \
-        *data = val;                                            \
+        uint32_t val_ = *data;                                  \
+        val_ &= ~(field##_MASK << field##_SHIFT);               \
+        val_ |= ((newval) & field##_MASK) << field##_SHIFT;     \
+        *data = val_;                                           \
     } while (0)
 
 typedef enum EPType {
@@ -1894,7 +1894,7 @@ static void xhci_kick_epctx(XHCIEPContext *epctx, unsigned int streamid)
     }
 
     if (epctx->retry) {
-        XHCITransfer *xfer = epctx->retry;
+        xfer = epctx->retry;
 
         trace_usb_xhci_xfer_retry(xfer);
         assert(xfer->running_retry);
-- 
2.41.0



             reply	other threads:[~2023-10-04  9:36 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-04  9:36 Thomas Huth [this message]
2023-10-04 11:44 ` [PATCH] hw/usb: Silence compiler warnings in USB code when compiling with -Wshadow Markus Armbruster
2023-10-04 13:03   ` Thomas Huth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231004093620.97906-1-thuth@redhat.com \
    --to=thuth@redhat.com \
    --cc=armbru@redhat.com \
    --cc=kraxel@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-trivial@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).