From: Laurent Vivier <laurent@vivier.eu>
To: qemu-devel@nongnu.org
Cc: "Mark Cave-Ayland" <mark.cave-ayland@ilande.co.uk>,
"Laurent Vivier" <laurent@vivier.eu>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>
Subject: [PULL 04/20] q800: implement additional machine id bits on VIA1 port A
Date: Sun, 8 Oct 2023 08:23:33 +0200 [thread overview]
Message-ID: <20231008062349.2733552-5-laurent@vivier.eu> (raw)
In-Reply-To: <20231008062349.2733552-1-laurent@vivier.eu>
From: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004083806.757242-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
hw/misc/mac_via.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/hw/misc/mac_via.c b/hw/misc/mac_via.c
index f84cc68849ab..e87a1b82d8c5 100644
--- a/hw/misc/mac_via.c
+++ b/hw/misc/mac_via.c
@@ -114,6 +114,9 @@
#define VIA1A_CPUID1 0x04 /* CPU id bit 0 on RBV, others */
#define VIA1A_CPUID2 0x10 /* CPU id bit 0 on RBV, others */
#define VIA1A_CPUID3 0x40 /* CPU id bit 0 on RBV, others */
+#define VIA1A_CPUID_MASK (VIA1A_CPUID0 | VIA1A_CPUID1 | \
+ VIA1A_CPUID2 | VIA1A_CPUID3)
+#define VIA1A_CPUID_Q800 (VIA1A_CPUID0 | VIA1A_CPUID2)
/*
* Info on VIA1B is from Macintosh Family Hardware & MkLinux.
@@ -872,9 +875,18 @@ static uint64_t mos6522_q800_via1_read(void *opaque, hwaddr addr, unsigned size)
{
MOS6522Q800VIA1State *s = MOS6522_Q800_VIA1(opaque);
MOS6522State *ms = MOS6522(s);
+ uint64_t ret;
addr = (addr >> 9) & 0xf;
- return mos6522_read(ms, addr, size);
+ ret = mos6522_read(ms, addr, size);
+ switch (addr) {
+ case VIA_REG_A:
+ case VIA_REG_ANH:
+ /* Quadra 800 Id */
+ ret = (ret & ~VIA1A_CPUID_MASK) | VIA1A_CPUID_Q800;
+ break;
+ }
+ return ret;
}
static void mos6522_q800_via1_write(void *opaque, hwaddr addr, uint64_t val,
--
2.41.0
next prev parent reply other threads:[~2023-10-08 6:26 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-08 6:23 [PULL 00/20] Q800 for 8.2 patches Laurent Vivier
2023-10-08 6:23 ` [PULL 01/20] q800-glue.c: convert to Resettable interface Laurent Vivier
2023-10-08 6:23 ` [PULL 02/20] q800: add djMEMC memory controller Laurent Vivier
2023-10-08 6:23 ` [PULL 03/20] q800: add machine id register Laurent Vivier
2023-10-08 6:23 ` Laurent Vivier [this message]
2023-10-08 6:23 ` [PULL 05/20] q800: add IOSB subsystem Laurent Vivier
2023-10-08 6:23 ` [PULL 06/20] q800: allow accesses to RAM area even if less memory is available Laurent Vivier
2023-10-08 6:23 ` [PULL 07/20] audio: add Apple Sound Chip (ASC) emulation Laurent Vivier
2023-10-08 6:23 ` [PULL 08/20] asc: generate silence if FIFO empty but engine still running Laurent Vivier
2023-10-08 6:23 ` [PULL 09/20] q800: add Apple Sound Chip (ASC) audio to machine Laurent Vivier
2023-10-08 6:23 ` [PULL 10/20] q800: add easc bool machine class property to switch between ASC and EASC Laurent Vivier
2023-10-08 6:23 ` [PULL 11/20] swim: add trace events for IWM and ISM registers Laurent Vivier
2023-10-08 6:23 ` [PULL 12/20] swim: split into separate IWM and ISM register blocks Laurent Vivier
2023-10-08 6:23 ` [PULL 13/20] swim: update IWM/ISM register block decoding Laurent Vivier
2023-10-08 6:23 ` [PULL 14/20] mac_via: work around underflow in TimeDBRA timing loop in SETUPTIMEK Laurent Vivier
2023-10-08 6:23 ` [PULL 15/20] mac_via: workaround NetBSD ADB bus enumeration issue Laurent Vivier
2023-10-08 6:23 ` [PULL 16/20] mac_via: implement ADB_STATE_IDLE state if shift register in input mode Laurent Vivier
2023-10-08 6:23 ` [PULL 17/20] mac_via: always clear ADB interrupt when switching to A/UX mode Laurent Vivier
2023-10-08 6:23 ` [PULL 18/20] q800: add ESCC alias at 0xc000 Laurent Vivier
2023-10-08 6:23 ` [PULL 19/20] q800: add alias for MacOS toolbox ROM at 0x40000000 Laurent Vivier
2023-10-08 6:23 ` [PULL 20/20] mac_via: extend timer calibration hack to work with A/UX Laurent Vivier
2023-10-10 1:29 ` [PULL 00/20] Q800 for 8.2 patches Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231008062349.2733552-5-laurent@vivier.eu \
--to=laurent@vivier.eu \
--cc=mark.cave-ayland@ilande.co.uk \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).