From: Juan Quintela <quintela@redhat.com>
To: qemu-devel@nongnu.org
Cc: Fabiano Rosas <farosas@suse.de>, Peter Xu <peterx@redhat.com>,
Juan Quintela <quintela@redhat.com>,
Leonardo Bras <leobras@redhat.com>,
Li Zhijian <lizhijian@fujitsu.com>
Subject: [PATCH v3 12/13] migration/rdma: Declare for index variables local
Date: Wed, 11 Oct 2023 22:35:26 +0200 [thread overview]
Message-ID: <20231011203527.9061-13-quintela@redhat.com> (raw)
In-Reply-To: <20231011203527.9061-1-quintela@redhat.com>
Declare all variables that are only used inside a for loop inside the
for statement.
This makes clear that they are not used outside of the for loop.
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
migration/rdma.c | 44 ++++++++++++++++++--------------------------
1 file changed, 18 insertions(+), 26 deletions(-)
diff --git a/migration/rdma.c b/migration/rdma.c
index e29e5551d1..a43527a83c 100644
--- a/migration/rdma.c
+++ b/migration/rdma.c
@@ -559,10 +559,8 @@ static void rdma_add_block(RDMAContext *rdma, const char *block_name,
local->block = g_new0(RDMALocalBlock, local->nb_blocks + 1);
if (local->nb_blocks) {
- int x;
-
if (rdma->blockmap) {
- for (x = 0; x < local->nb_blocks; x++) {
+ for (int x = 0; x < local->nb_blocks; x++) {
g_hash_table_remove(rdma->blockmap,
(void *)(uintptr_t)old[x].offset);
g_hash_table_insert(rdma->blockmap,
@@ -649,15 +647,12 @@ static void rdma_delete_block(RDMAContext *rdma, RDMALocalBlock *block)
{
RDMALocalBlocks *local = &rdma->local_ram_blocks;
RDMALocalBlock *old = local->block;
- int x;
if (rdma->blockmap) {
g_hash_table_remove(rdma->blockmap, (void *)(uintptr_t)block->offset);
}
if (block->pmr) {
- int j;
-
- for (j = 0; j < block->nb_chunks; j++) {
+ for (int j = 0; j < block->nb_chunks; j++) {
if (!block->pmr[j]) {
continue;
}
@@ -687,7 +682,7 @@ static void rdma_delete_block(RDMAContext *rdma, RDMALocalBlock *block)
block->block_name = NULL;
if (rdma->blockmap) {
- for (x = 0; x < local->nb_blocks; x++) {
+ for (int x = 0; x < local->nb_blocks; x++) {
g_hash_table_remove(rdma->blockmap,
(void *)(uintptr_t)old[x].offset);
}
@@ -705,7 +700,7 @@ static void rdma_delete_block(RDMAContext *rdma, RDMALocalBlock *block)
memcpy(local->block + block->index, old + (block->index + 1),
sizeof(RDMALocalBlock) *
(local->nb_blocks - (block->index + 1)));
- for (x = block->index; x < local->nb_blocks - 1; x++) {
+ for (int x = block->index; x < local->nb_blocks - 1; x++) {
local->block[x].index--;
}
}
@@ -725,7 +720,7 @@ static void rdma_delete_block(RDMAContext *rdma, RDMALocalBlock *block)
local->nb_blocks--;
if (local->nb_blocks && rdma->blockmap) {
- for (x = 0; x < local->nb_blocks; x++) {
+ for (int x = 0; x < local->nb_blocks; x++) {
g_hash_table_insert(rdma->blockmap,
(void *)(uintptr_t)local->block[x].offset,
&local->block[x]);
@@ -828,12 +823,12 @@ static int qemu_rdma_broken_ipv6_kernel(struct ibv_context *verbs, Error **errp)
* Otherwise, there are no guarantees until the bug is fixed in linux.
*/
if (!verbs) {
- int num_devices, x;
+ int num_devices;
struct ibv_device **dev_list = ibv_get_device_list(&num_devices);
bool roce_found = false;
bool ib_found = false;
- for (x = 0; x < num_devices; x++) {
+ for (int x = 0; x < num_devices; x++) {
verbs = ibv_open_device(dev_list[x]);
/*
* ibv_open_device() is not documented to set errno. If
@@ -925,7 +920,6 @@ static int qemu_rdma_resolve_host(RDMAContext *rdma, Error **errp)
char port_str[16];
struct rdma_cm_event *cm_event;
char ip[40] = "unknown";
- struct rdma_addrinfo *e;
if (rdma->host == NULL || !strcmp(rdma->host, "")) {
error_setg(errp, "RDMA ERROR: RDMA hostname has not been set");
@@ -957,7 +951,7 @@ static int qemu_rdma_resolve_host(RDMAContext *rdma, Error **errp)
}
/* Try all addresses, saving the first error in @err */
- for (e = res; e != NULL; e = e->ai_next) {
+ for (struct rdma_addrinfo *e = res; e != NULL; e = e->ai_next) {
Error **local_errp = err ? NULL : &err;
inet_ntop(e->ai_family,
@@ -2777,7 +2771,7 @@ static ssize_t qio_channel_rdma_writev(QIOChannel *ioc,
RDMAContext *rdma;
int ret;
ssize_t done = 0;
- size_t i, len;
+ size_t len;
RCU_READ_LOCK_GUARD();
rdma = qatomic_rcu_read(&rioc->rdmaout);
@@ -2803,7 +2797,7 @@ static ssize_t qio_channel_rdma_writev(QIOChannel *ioc,
return -1;
}
- for (i = 0; i < niov; i++) {
+ for (int i = 0; i < niov; i++) {
size_t remaining = iov[i].iov_len;
uint8_t * data = (void *)iov[i].iov_base;
while (remaining) {
@@ -2866,7 +2860,7 @@ static ssize_t qio_channel_rdma_readv(QIOChannel *ioc,
RDMAControlHeader head;
int ret;
ssize_t done = 0;
- size_t i, len;
+ size_t len;
RCU_READ_LOCK_GUARD();
rdma = qatomic_rcu_read(&rioc->rdmain);
@@ -2882,7 +2876,7 @@ static ssize_t qio_channel_rdma_readv(QIOChannel *ioc,
return -1;
}
- for (i = 0; i < niov; i++) {
+ for (int i = 0; i < niov; i++) {
size_t want = iov[i].iov_len;
uint8_t *data = (void *)iov[i].iov_base;
@@ -3557,8 +3551,6 @@ int rdma_registration_handle(QEMUFile *f)
void *host_addr;
int ret;
int idx = 0;
- int count = 0;
- int i = 0;
if (!migrate_rdma()) {
return 0;
@@ -3629,7 +3621,7 @@ int rdma_registration_handle(QEMUFile *f)
qsort(rdma->local_ram_blocks.block,
rdma->local_ram_blocks.nb_blocks,
sizeof(RDMALocalBlock), dest_ram_sort_func);
- for (i = 0; i < local->nb_blocks; i++) {
+ for (int i = 0; i < local->nb_blocks; i++) {
local->block[i].index = i;
}
@@ -3647,7 +3639,7 @@ int rdma_registration_handle(QEMUFile *f)
* Both sides use the "remote" structure to communicate and update
* their "local" descriptions with what was sent.
*/
- for (i = 0; i < local->nb_blocks; i++) {
+ for (int i = 0; i < local->nb_blocks; i++) {
rdma->dest_blocks[i].remote_host_addr =
(uintptr_t)(local->block[i].local_host_addr);
@@ -3687,7 +3679,7 @@ int rdma_registration_handle(QEMUFile *f)
reg_resp.repeat = head.repeat;
registers = (RDMARegister *) rdma->wr_data[idx].control_curr;
- for (count = 0; count < head.repeat; count++) {
+ for (int count = 0; count < head.repeat; count++) {
uint64_t chunk;
uint8_t *chunk_start, *chunk_end;
@@ -3762,7 +3754,7 @@ int rdma_registration_handle(QEMUFile *f)
unreg_resp.repeat = head.repeat;
registers = (RDMARegister *) rdma->wr_data[idx].control_curr;
- for (count = 0; count < head.repeat; count++) {
+ for (int count = 0; count < head.repeat; count++) {
reg = ®isters[count];
network_to_register(reg);
@@ -3910,7 +3902,7 @@ int rdma_registration_stop(QEMUFile *f, uint64_t flags)
if (flags == RAM_CONTROL_SETUP) {
RDMAControlHeader resp = {.type = RDMA_CONTROL_RAM_BLOCKS_RESULT };
RDMALocalBlocks *local = &rdma->local_ram_blocks;
- int reg_result_idx, i, nb_dest_blocks;
+ int reg_result_idx, nb_dest_blocks;
head.type = RDMA_CONTROL_RAM_BLOCKS_REQUEST;
trace_rdma_registration_stop_ram();
@@ -3958,7 +3950,7 @@ int rdma_registration_stop(QEMUFile *f, uint64_t flags)
qemu_rdma_move_header(rdma, reg_result_idx, &resp);
memcpy(rdma->dest_blocks,
rdma->wr_data[reg_result_idx].control_curr, resp.len);
- for (i = 0; i < nb_dest_blocks; i++) {
+ for (int i = 0; i < nb_dest_blocks; i++) {
network_to_dest_block(&rdma->dest_blocks[i]);
/* We require that the blocks are in the same order */
--
2.41.0
next prev parent reply other threads:[~2023-10-11 20:37 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-11 20:35 [PATCH v3 00/13] Removal of QEMUFileHooks Juan Quintela
2023-10-11 20:35 ` [PATCH v3 01/13] migration: Create migrate_rdma() Juan Quintela
2023-10-13 7:58 ` Zhijian Li (Fujitsu)
2023-10-11 20:35 ` [PATCH v3 02/13] migration/rdma: Unfold ram_control_before_iterate() Juan Quintela
2023-10-12 14:21 ` Fabiano Rosas
2023-10-13 8:24 ` Zhijian Li (Fujitsu)
2023-10-11 20:35 ` [PATCH v3 03/13] migration/rdma: Unfold ram_control_after_iterate() Juan Quintela
2023-10-13 7:59 ` Zhijian Li (Fujitsu)
2023-10-11 20:35 ` [PATCH v3 04/13] migration/rdma: Remove all uses of RAM_CONTROL_HOOK Juan Quintela
2023-10-13 8:00 ` Zhijian Li (Fujitsu)
2023-10-11 20:35 ` [PATCH v3 05/13] migration/rdma: Unfold hook_ram_load() Juan Quintela
2023-10-13 8:02 ` Zhijian Li (Fujitsu)
2023-10-11 20:35 ` [PATCH v3 06/13] migration/rdma: Create rdma_control_save_page() Juan Quintela
2023-10-13 8:05 ` Zhijian Li (Fujitsu)
2023-10-11 20:35 ` [PATCH v3 07/13] qemu-file: Remove QEMUFileHooks Juan Quintela
2023-10-13 8:07 ` Zhijian Li (Fujitsu)
2023-10-11 20:35 ` [PATCH v3 08/13] migration/rdma: Move rdma constants from qemu-file.h to rdma.h Juan Quintela
2023-10-13 8:08 ` Zhijian Li (Fujitsu)
2023-10-11 20:35 ` [PATCH v3 09/13] migration/rdma: Remove qemu_ prefix from exported functions Juan Quintela
2023-10-13 8:09 ` Zhijian Li (Fujitsu)
2023-10-11 20:35 ` [PATCH v3 10/13] migration/rdma: Check sooner if we are in postcopy for save_page() Juan Quintela
2023-10-13 8:11 ` Zhijian Li (Fujitsu)
2023-10-11 20:35 ` [PATCH v3 11/13] migration/rdma: Use i as for index instead of idx Juan Quintela
2023-10-12 14:30 ` Fabiano Rosas
2023-10-13 8:13 ` Zhijian Li (Fujitsu)
2023-10-11 20:35 ` Juan Quintela [this message]
2023-10-12 14:33 ` [PATCH v3 12/13] migration/rdma: Declare for index variables local Fabiano Rosas
2023-10-13 8:17 ` Zhijian Li (Fujitsu)
2023-10-11 20:35 ` [PATCH v3 13/13] migration/rdma: Remove all "ret" variables that are used only once Juan Quintela
2023-10-12 14:44 ` Fabiano Rosas
2023-10-16 6:36 ` Juan Quintela
2023-10-13 8:19 ` Zhijian Li (Fujitsu)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231011203527.9061-13-quintela@redhat.com \
--to=quintela@redhat.com \
--cc=farosas@suse.de \
--cc=leobras@redhat.com \
--cc=lizhijian@fujitsu.com \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).