From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: deller@gmx.de
Subject: [PATCH 00/61] target/hppa: Implement hppa64-cpu
Date: Wed, 18 Oct 2023 14:50:34 -0700 [thread overview]
Message-ID: <20231018215135.1561375-1-richard.henderson@linaro.org> (raw)
This is the pa2.0 cpu that should populate Helge's C3700 workstation.
I have adjusted both user and system binaries to always support the
64-bit cpu but default to the 32-bit cpu.
I have not yet copied the linux kernel sigframe hackery to save
the upper halves of the registers across signals. I couldn't get
hppa-linux-gcc to produce 64-bit code with -march=2.0. I did some
some manual testing with hppa64-linux-gnu, but that expects lp64
and a full 64-bit system library, so the tests has to be small
and self-contained and also required some manual adjustment for
the .got pointer references.
But! With said adjustments we can run tests/tcg/multilib/sha512,
which uses uint64_t a fair bit. Bugs were found and fixed.
r~
Helge Deller (2):
target/hppa: sar register allows only 5 bits on 32-bit CPU
target/hppa: Fix interruption based on default PSW
Richard Henderson (59):
include/hw/elf: Remove truncating signed casts
target/hppa: Remove get_temp
target/hppa: Remove get_temp_tl
target/hppa: Remove load_const
target/hppa: Fix hppa64 case in machine.c
target/hppa: Fix load in do_load_32
target/hppa: Truncate rotate count in trans_shrpw_sar
target/hppa: Fix trans_ds for hppa64
target/hppa: Fix do_add, do_sub for hppa64
target/hppa: Fix bb_sar for hppa64
target/hppa: Fix extrw and depw with sar for hppa64
target/hppa: Introduce TYPE_HPPA64_CPU
target/hppa: Make HPPA_BTLB_ENTRIES variable
target/hppa: Implement cpu_list
target/hppa: Implement hppa_cpu_class_by_name
target/hppa: Update cpu_hppa_get/put_psw for hppa64
target/hppa: Handle absolute addresses for pa2.0
target/hppa: Adjust hppa_cpu_dump_state for hppa64
hw/hppa: Translate phys addresses for the cpu
target/hppa: Fix hppa64 addressing
target/hppa: Pass d to do_cond
target/hppa: Pass d to do_sub_cond
target/hppa: Pass d to do_log_cond
target/hppa: Pass d to do_sed_cond
target/hppa: Pass d to do_unit_cond
linux-user/hppa: Fixes for TARGET_ABI32
target/hppa: Drop attempted gdbstub support for hppa64
target/hppa: Remove TARGET_HPPA64
target/hppa: Decode d for logical instructions
target/hppa: Decode d for unit instructions
target/hppa: Decode d for cmpclr instructions
target/hppa: Decode d for add instructions
target/hppa: Decode d for sub instructions
target/hppa: Decode d for bb instructions
target/hppa: Decode d for cmpb instructions
target/hppa: Decode CMPIB double-word
target/hppa: Decode ADDB double-word
target/hppa: Implement LDD, LDCD, LDDA, STD, STDA
target/hppa: Implement DEPD, DEPDI
target/hppa: Implement EXTRD
target/hppa: Implement SHRPD
target/hppa: Implement CLRBTS, POPBTS, PUSHBTS, PUSHNOM
target/hppa: Implement STDBY
target/hppa: Implement IDTLBT, IITLBT
target/hppa: Remove TARGET_REGISTER_BITS
target/hppa: Remove most of the TARGET_REGISTER_BITS redirections
target/hppa: Remove remaining TARGET_REGISTER_BITS redirections
target/hppa: Use tcg_temp_new_i64 not tcg_temp_new
target/hppa: Replace tcg_gen_*_tl with tcg_gen_*_i64
target/hppa: Implement HADD
target/hppa: Implement HSUB
target/hppa: Implement HAVG
target/hppa: Implement HSHL, HSHR
target/hppa: Implement HSHLADD, HSHRADD
target/hppa: Implement MIXH, MIXW
target/hppa: Implement PERMH
target/hppa: Precompute zero into DisasContext
target/hppa: Return zero for r0 from load_gpr
target/hppa: Simplify trans_dep*_imm
configs/targets/hppa-linux-user.mak | 1 +
include/hw/elf_ops.h | 17 +-
linux-user/hppa/target_elf.h | 2 +-
target/hppa/cpu-param.h | 22 +-
target/hppa/cpu-qom.h | 1 +
target/hppa/cpu.h | 99 +-
target/hppa/helper.h | 53 +-
target/hppa/insns.decode | 169 ++-
hw/hppa/machine.c | 93 +-
linux-user/hppa/signal.c | 6 +-
target/hppa/cpu.c | 52 +-
target/hppa/gdbstub.c | 26 +-
target/hppa/helper.c | 91 +-
target/hppa/int_helper.c | 30 +-
target/hppa/machine.c | 13 +-
target/hppa/mem_helper.c | 141 +-
target/hppa/op_helper.c | 310 +++-
target/hppa/sys_helper.c | 13 +-
target/hppa/translate.c | 2030 +++++++++++++++------------
19 files changed, 1959 insertions(+), 1210 deletions(-)
--
2.34.1
next reply other threads:[~2023-10-18 21:53 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-18 21:50 Richard Henderson [this message]
2023-10-18 21:50 ` [PATCH 01/61] include/hw/elf: Remove truncating signed casts Richard Henderson
2023-10-18 21:50 ` [PATCH 02/61] target/hppa: Remove get_temp Richard Henderson
2023-10-19 9:41 ` Philippe Mathieu-Daudé
2023-10-18 21:50 ` [PATCH 03/61] target/hppa: Remove get_temp_tl Richard Henderson
2023-10-19 9:42 ` Philippe Mathieu-Daudé
2023-10-18 21:50 ` [PATCH 04/61] target/hppa: Remove load_const Richard Henderson
2023-10-18 21:50 ` [PATCH 05/61] target/hppa: Fix hppa64 case in machine.c Richard Henderson
2023-10-18 21:50 ` [PATCH 06/61] target/hppa: Fix load in do_load_32 Richard Henderson
2023-10-19 9:42 ` Philippe Mathieu-Daudé
2023-10-18 21:50 ` [PATCH 07/61] target/hppa: Truncate rotate count in trans_shrpw_sar Richard Henderson
2023-10-18 21:50 ` [PATCH 08/61] target/hppa: Fix trans_ds for hppa64 Richard Henderson
2023-10-18 21:50 ` [PATCH 09/61] target/hppa: Fix do_add, do_sub " Richard Henderson
2023-10-18 21:50 ` [PATCH 10/61] target/hppa: Fix bb_sar " Richard Henderson
2023-10-18 21:50 ` [PATCH 11/61] target/hppa: Fix extrw and depw with sar " Richard Henderson
2023-10-18 21:50 ` [PATCH 12/61] target/hppa: Introduce TYPE_HPPA64_CPU Richard Henderson
2023-10-19 9:44 ` Philippe Mathieu-Daudé
2023-10-18 21:50 ` [PATCH 13/61] target/hppa: Make HPPA_BTLB_ENTRIES variable Richard Henderson
2023-10-18 21:50 ` [PATCH 14/61] target/hppa: Implement cpu_list Richard Henderson
2023-10-18 21:50 ` [PATCH 15/61] target/hppa: Implement hppa_cpu_class_by_name Richard Henderson
2023-10-18 21:50 ` [PATCH 16/61] target/hppa: Update cpu_hppa_get/put_psw for hppa64 Richard Henderson
2023-10-18 21:50 ` [PATCH 17/61] target/hppa: Handle absolute addresses for pa2.0 Richard Henderson
2023-10-18 21:50 ` [PATCH 18/61] target/hppa: Adjust hppa_cpu_dump_state for hppa64 Richard Henderson
2023-10-18 21:50 ` [PATCH 19/61] hw/hppa: Translate phys addresses for the cpu Richard Henderson
2023-10-18 21:50 ` [PATCH 20/61] target/hppa: Fix hppa64 addressing Richard Henderson
2023-10-18 21:50 ` [PATCH 21/61] target/hppa: sar register allows only 5 bits on 32-bit CPU Richard Henderson
2023-10-18 21:50 ` [PATCH 22/61] target/hppa: Pass d to do_cond Richard Henderson
2023-10-18 21:50 ` [PATCH 23/61] target/hppa: Pass d to do_sub_cond Richard Henderson
2023-10-18 21:50 ` [PATCH 24/61] target/hppa: Pass d to do_log_cond Richard Henderson
2023-10-18 21:50 ` [PATCH 25/61] target/hppa: Pass d to do_sed_cond Richard Henderson
2023-10-18 21:51 ` [PATCH 26/61] target/hppa: Pass d to do_unit_cond Richard Henderson
2023-10-18 21:51 ` [PATCH 27/61] linux-user/hppa: Fixes for TARGET_ABI32 Richard Henderson
2023-10-19 9:49 ` Philippe Mathieu-Daudé
2023-10-18 21:51 ` [PATCH 28/61] target/hppa: Drop attempted gdbstub support for hppa64 Richard Henderson
2023-10-18 21:51 ` [PATCH 29/61] target/hppa: Remove TARGET_HPPA64 Richard Henderson
2023-10-18 21:51 ` [PATCH 30/61] target/hppa: Decode d for logical instructions Richard Henderson
2023-10-18 21:51 ` [PATCH 31/61] target/hppa: Decode d for unit instructions Richard Henderson
2023-10-18 21:51 ` [PATCH 32/61] target/hppa: Decode d for cmpclr instructions Richard Henderson
2023-10-18 21:51 ` [PATCH 33/61] target/hppa: Decode d for add instructions Richard Henderson
2023-10-18 21:51 ` [PATCH 34/61] target/hppa: Decode d for sub instructions Richard Henderson
2023-10-18 21:51 ` [PATCH 35/61] target/hppa: Decode d for bb instructions Richard Henderson
2023-10-18 21:51 ` [PATCH 36/61] target/hppa: Decode d for cmpb instructions Richard Henderson
2023-10-18 21:51 ` [PATCH 37/61] target/hppa: Decode CMPIB double-word Richard Henderson
2023-10-18 21:51 ` [PATCH 38/61] target/hppa: Decode ADDB double-word Richard Henderson
2023-10-18 21:51 ` [PATCH 39/61] target/hppa: Implement LDD, LDCD, LDDA, STD, STDA Richard Henderson
2023-10-18 21:51 ` [PATCH 40/61] target/hppa: Implement DEPD, DEPDI Richard Henderson
2023-10-18 21:51 ` [PATCH 41/61] target/hppa: Implement EXTRD Richard Henderson
2023-10-18 21:51 ` [PATCH 42/61] target/hppa: Implement SHRPD Richard Henderson
2023-10-18 21:51 ` [PATCH 43/61] target/hppa: Implement CLRBTS, POPBTS, PUSHBTS, PUSHNOM Richard Henderson
2023-10-18 21:51 ` [PATCH 44/61] target/hppa: Implement STDBY Richard Henderson
2023-10-18 21:51 ` [PATCH 45/61] target/hppa: Implement IDTLBT, IITLBT Richard Henderson
2023-10-18 21:51 ` [PATCH 46/61] target/hppa: Remove TARGET_REGISTER_BITS Richard Henderson
2023-10-18 21:51 ` [PATCH 47/61] target/hppa: Remove most of the TARGET_REGISTER_BITS redirections Richard Henderson
2023-10-18 21:51 ` [PATCH 48/61] target/hppa: Remove remaining " Richard Henderson
2023-10-18 21:51 ` [PATCH 49/61] target/hppa: Use tcg_temp_new_i64 not tcg_temp_new Richard Henderson
2023-10-18 21:51 ` [PATCH 50/61] target/hppa: Replace tcg_gen_*_tl with tcg_gen_*_i64 Richard Henderson
2023-10-18 21:51 ` [PATCH 51/61] target/hppa: Implement HADD Richard Henderson
2023-10-18 21:51 ` [PATCH 52/61] target/hppa: Implement HSUB Richard Henderson
2023-10-18 21:51 ` [PATCH 53/61] target/hppa: Implement HAVG Richard Henderson
2023-10-18 21:51 ` [PATCH 54/61] target/hppa: Implement HSHL, HSHR Richard Henderson
2023-10-18 21:51 ` [PATCH 55/61] target/hppa: Implement HSHLADD, HSHRADD Richard Henderson
2023-10-18 21:51 ` [PATCH 56/61] target/hppa: Implement MIXH, MIXW Richard Henderson
2023-10-18 21:51 ` [PATCH 57/61] target/hppa: Implement PERMH Richard Henderson
2023-10-18 21:51 ` [PATCH 58/61] target/hppa: Fix interruption based on default PSW Richard Henderson
2023-10-18 21:51 ` [PATCH 59/61] target/hppa: Precompute zero into DisasContext Richard Henderson
2023-10-18 21:51 ` [PATCH 60/61] target/hppa: Return zero for r0 from load_gpr Richard Henderson
2023-10-18 21:51 ` [PATCH 61/61] target/hppa: Simplify trans_dep*_imm Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231018215135.1561375-1-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=deller@gmx.de \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).