From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>, qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org, "Peter Maydell" <peter.maydell@linaro.org>,
"Marc-André Lureau" <marcandre.lureau@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Alistair Francis" <alistair@alistair23.me>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>
Subject: [PATCH v2 1/4] hw/char/stm32f2xx_usart: Extract common IRQ update code to update_irq()
Date: Fri, 20 Oct 2023 19:00:05 +0200 [thread overview]
Message-ID: <20231020170009.86870-2-philmd@linaro.org> (raw)
In-Reply-To: <20231020170009.86870-1-philmd@linaro.org>
From: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
[PMD: Split from bigger patch]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
hw/char/stm32f2xx_usart.c | 28 ++++++++++++++++------------
1 file changed, 16 insertions(+), 12 deletions(-)
diff --git a/hw/char/stm32f2xx_usart.c b/hw/char/stm32f2xx_usart.c
index fde67f4f03..519d3461a3 100644
--- a/hw/char/stm32f2xx_usart.c
+++ b/hw/char/stm32f2xx_usart.c
@@ -53,6 +53,17 @@ static int stm32f2xx_usart_can_receive(void *opaque)
return 0;
}
+static void stm32f2xx_update_irq(STM32F2XXUsartState *s)
+{
+ uint32_t mask = s->usart_sr & s->usart_cr1;
+
+ if (mask & (USART_SR_TXE | USART_SR_TC | USART_SR_RXNE)) {
+ qemu_set_irq(s->irq, 1);
+ } else {
+ qemu_set_irq(s->irq, 0);
+ }
+}
+
static void stm32f2xx_usart_receive(void *opaque, const uint8_t *buf, int size)
{
STM32F2XXUsartState *s = opaque;
@@ -66,9 +77,7 @@ static void stm32f2xx_usart_receive(void *opaque, const uint8_t *buf, int size)
s->usart_dr = *buf;
s->usart_sr |= USART_SR_RXNE;
- if (s->usart_cr1 & USART_CR1_RXNEIE) {
- qemu_set_irq(s->irq, 1);
- }
+ stm32f2xx_update_irq(s);
DB_PRINT("Receiving: %c\n", s->usart_dr);
}
@@ -85,7 +94,7 @@ static void stm32f2xx_usart_reset(DeviceState *dev)
s->usart_cr3 = 0x00000000;
s->usart_gtpr = 0x00000000;
- qemu_set_irq(s->irq, 0);
+ stm32f2xx_update_irq(s);
}
static uint64_t stm32f2xx_usart_read(void *opaque, hwaddr addr,
@@ -106,7 +115,7 @@ static uint64_t stm32f2xx_usart_read(void *opaque, hwaddr addr,
retvalue = s->usart_dr & 0x3FF;
s->usart_sr &= ~USART_SR_RXNE;
qemu_chr_fe_accept_input(&s->chr);
- qemu_set_irq(s->irq, 0);
+ stm32f2xx_update_irq(s);
return retvalue;
case USART_BRR:
return s->usart_brr;
@@ -145,9 +154,7 @@ static void stm32f2xx_usart_write(void *opaque, hwaddr addr,
} else {
s->usart_sr &= value;
}
- if (!(s->usart_sr & USART_SR_RXNE)) {
- qemu_set_irq(s->irq, 0);
- }
+ stm32f2xx_update_irq(s);
return;
case USART_DR:
if (value < 0xF000) {
@@ -168,10 +175,7 @@ static void stm32f2xx_usart_write(void *opaque, hwaddr addr,
return;
case USART_CR1:
s->usart_cr1 = value;
- if (s->usart_cr1 & USART_CR1_RXNEIE &&
- s->usart_sr & USART_SR_RXNE) {
- qemu_set_irq(s->irq, 1);
- }
+ stm32f2xx_update_irq(s);
return;
case USART_CR2:
s->usart_cr2 = value;
--
2.41.0
next prev parent reply other threads:[~2023-10-20 17:01 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-20 17:00 [PATCH v2 0/4] stm32f2xx_usart: implement TX interrupts Philippe Mathieu-Daudé
2023-10-20 17:00 ` Philippe Mathieu-Daudé [this message]
2023-10-22 16:53 ` [PATCH v2 1/4] hw/char/stm32f2xx_usart: Extract common IRQ update code to update_irq() Richard Henderson
2023-10-23 1:34 ` Alistair Francis
2023-10-20 17:00 ` [PATCH v2 2/4] hw/char/stm32f2xx_usart: Update IRQ when SR is read Philippe Mathieu-Daudé
2023-10-22 16:54 ` Richard Henderson
2023-10-23 1:36 ` Alistair Francis
2023-10-23 9:38 ` Hans-Erik Floryd
2023-10-20 17:00 ` [PATCH v2 3/4] hw/char/stm32f2xx_usart: Update IRQ when DR is written Philippe Mathieu-Daudé
2023-10-22 16:54 ` Richard Henderson
2023-10-23 1:37 ` Alistair Francis
2023-10-20 17:00 ` [PATCH v2 4/4] hw/char/stm32f2xx_usart: Add more definitions for CR1 register Philippe Mathieu-Daudé
2023-10-22 16:54 ` Richard Henderson
2023-10-23 1:38 ` Alistair Francis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231020170009.86870-2-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=alistair@alistair23.me \
--cc=hans-erik.floryd@rt-labs.com \
--cc=marcandre.lureau@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).