qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Xu <peterx@redhat.com>
To: qemu-devel@nongnu.org
Cc: Juan Quintela <quintela@redhat.com>,
	Fabiano Rosas <farosas@suse.de>,
	peterx@redhat.com
Subject: [PATCH RFC 4/7] migration: Drop MultiFDSendParams.quit and cleanup error paths
Date: Sun, 22 Oct 2023 16:12:08 -0400	[thread overview]
Message-ID: <20231022201211.452861-5-peterx@redhat.com> (raw)
In-Reply-To: <20231022201211.452861-1-peterx@redhat.com>

Multifd send side has two fields to indicate error quits:

  - MultiFDSendParams.quit
  - &multifd_send_state->exiting

Merge them into the global one.  The replacement is done by changing all
p->quit checks into the global var check.  The global check doesn't need
any lock.

A few more things done on top of this altogether:

  - multifd_send_terminate_threads()

    Moving the xchg() of &multifd_send_state->exiting upper, so as to cover
    the tracepoint, migrate_set_error() and migrate_set_state().

  - multifd_send_sync_main()

    In the 2nd loop, add one more check over the global var to make sure we
    don't keep the looping if QEMU already decided to quit.

  - multifd_tls_outgoing_handshake()

    Use multifd_send_terminate_threads() to set the error state.  That has
    a benefit of updating MigrationState.error to that error too, so we can
    persist that 1st error we hit in that specific channel.

  - multifd_new_send_channel_async()

    Take similar approach like above, drop the migrate_set_error() because
    multifd_send_terminate_threads() already covers that.  Unwrap the helper
    multifd_new_send_channel_cleanup() along the way; not really needed.

Signed-off-by: Peter Xu <peterx@redhat.com>
---
 migration/multifd.h |  2 --
 migration/multifd.c | 82 ++++++++++++++-------------------------------
 2 files changed, 26 insertions(+), 58 deletions(-)

diff --git a/migration/multifd.h b/migration/multifd.h
index a835643b48..2acf400085 100644
--- a/migration/multifd.h
+++ b/migration/multifd.h
@@ -97,8 +97,6 @@ typedef struct {
     QemuMutex mutex;
     /* is this channel thread running */
     bool running;
-    /* should this thread finish */
-    bool quit;
     /* multifd flags for each packet */
     uint32_t flags;
     /* global number of generated multifd packets */
diff --git a/migration/multifd.c b/migration/multifd.c
index 33fb21d0e4..9d458914a9 100644
--- a/migration/multifd.c
+++ b/migration/multifd.c
@@ -411,10 +411,6 @@ static int multifd_send_pages(QEMUFile *f)
     MultiFDSendParams *p = NULL; /* make happy gcc */
     MultiFDPages_t *pages = multifd_send_state->pages;
 
-    if (qatomic_read(&multifd_send_state->exiting)) {
-        return -1;
-    }
-
     qemu_sem_wait(&multifd_send_state->channels_ready);
     /*
      * next_channel can remain from a previous migration that was
@@ -423,14 +419,11 @@ static int multifd_send_pages(QEMUFile *f)
      */
     next_channel %= migrate_multifd_channels();
     for (i = next_channel;; i = (i + 1) % migrate_multifd_channels()) {
-        p = &multifd_send_state->params[i];
-
-        qemu_mutex_lock(&p->mutex);
-        if (p->quit) {
-            error_report("%s: channel %d has already quit!", __func__, i);
-            qemu_mutex_unlock(&p->mutex);
+        if (qatomic_read(&multifd_send_state->exiting)) {
             return -1;
         }
+        p = &multifd_send_state->params[i];
+        qemu_mutex_lock(&p->mutex);
         if (!p->pending_job) {
             p->pending_job++;
             next_channel = (i + 1) % migrate_multifd_channels();
@@ -485,6 +478,16 @@ static void multifd_send_terminate_threads(Error *err)
 {
     int i;
 
+    /*
+     * We don't want to exit each threads twice.  Depending on where
+     * we get the error, or if there are two independent errors in two
+     * threads at the same time, we can end calling this function
+     * twice.
+     */
+    if (qatomic_xchg(&multifd_send_state->exiting, 1)) {
+        return;
+    }
+
     trace_multifd_send_terminate_threads(err != NULL);
 
     if (err) {
@@ -499,26 +502,13 @@ static void multifd_send_terminate_threads(Error *err)
         }
     }
 
-    /*
-     * We don't want to exit each threads twice.  Depending on where
-     * we get the error, or if there are two independent errors in two
-     * threads at the same time, we can end calling this function
-     * twice.
-     */
-    if (qatomic_xchg(&multifd_send_state->exiting, 1)) {
-        return;
-    }
-
     for (i = 0; i < migrate_multifd_channels(); i++) {
         MultiFDSendParams *p = &multifd_send_state->params[i];
 
-        qemu_mutex_lock(&p->mutex);
-        p->quit = true;
         qemu_sem_post(&p->sem);
         if (p->c) {
             qio_channel_shutdown(p->c, QIO_CHANNEL_SHUTDOWN_BOTH, NULL);
         }
-        qemu_mutex_unlock(&p->mutex);
     }
 }
 
@@ -617,16 +607,13 @@ int multifd_send_sync_main(QEMUFile *f)
     for (i = 0; i < migrate_multifd_channels(); i++) {
         MultiFDSendParams *p = &multifd_send_state->params[i];
 
-        trace_multifd_send_sync_main_signal(p->id);
-
-        qemu_mutex_lock(&p->mutex);
-
-        if (p->quit) {
-            error_report("%s: channel %d has already quit", __func__, i);
-            qemu_mutex_unlock(&p->mutex);
+        if (qatomic_read(&multifd_send_state->exiting)) {
             return -1;
         }
 
+        trace_multifd_send_sync_main_signal(p->id);
+
+        qemu_mutex_lock(&p->mutex);
         p->packet_num = multifd_send_state->packet_num++;
         p->flags |= MULTIFD_FLAG_SYNC;
         p->pending_job++;
@@ -636,6 +623,10 @@ int multifd_send_sync_main(QEMUFile *f)
     for (i = 0; i < migrate_multifd_channels(); i++) {
         MultiFDSendParams *p = &multifd_send_state->params[i];
 
+        if (qatomic_read(&multifd_send_state->exiting)) {
+            return -1;
+        }
+
         qemu_sem_wait(&multifd_send_state->channels_ready);
         trace_multifd_send_sync_main_wait(p->id);
         qemu_sem_wait(&p->sem_sync);
@@ -744,9 +735,6 @@ static void *multifd_send_thread(void *opaque)
             if (flags & MULTIFD_FLAG_SYNC) {
                 qemu_sem_post(&p->sem_sync);
             }
-        } else if (p->quit) {
-            qemu_mutex_unlock(&p->mutex);
-            break;
         } else {
             qemu_mutex_unlock(&p->mutex);
             /* sometimes there are spurious wakeups */
@@ -793,11 +781,7 @@ static void multifd_tls_outgoing_handshake(QIOTask *task,
 
     trace_multifd_tls_outgoing_handshake_error(ioc, error_get_pretty(err));
 
-    /*
-     * Error happen, mark multifd_send_thread status as 'quit' although it
-     * is not created, and then tell who pay attention to me.
-     */
-    p->quit = true;
+    multifd_send_terminate_threads(err);
     multifd_send_kick_main(p);
     error_free(err);
 }
@@ -864,22 +848,6 @@ static bool multifd_channel_connect(MultiFDSendParams *p,
     return true;
 }
 
-static void multifd_new_send_channel_cleanup(MultiFDSendParams *p,
-                                             QIOChannel *ioc, Error *err)
-{
-     migrate_set_error(migrate_get_current(), err);
-     /* Error happen, we need to tell who pay attention to me */
-     multifd_send_kick_main(p);
-     /*
-      * Although multifd_send_thread is not created, but main migration
-      * thread need to judge whether it is running, so we need to mark
-      * its status.
-      */
-     p->quit = true;
-     object_unref(OBJECT(ioc));
-     error_free(err);
-}
-
 static void multifd_new_send_channel_async(QIOTask *task, gpointer opaque)
 {
     MultiFDSendParams *p = opaque;
@@ -897,7 +865,10 @@ static void multifd_new_send_channel_async(QIOTask *task, gpointer opaque)
     }
 
     trace_multifd_new_send_channel_async_error(p->id, local_err);
-    multifd_new_send_channel_cleanup(p, ioc, local_err);
+    multifd_send_terminate_threads(local_err);
+    multifd_send_kick_main(p);
+    object_unref(OBJECT(ioc));
+    error_free(local_err);
 }
 
 static void multifd_new_send_channel_create(gpointer opaque)
@@ -929,7 +900,6 @@ int multifd_save_setup(Error **errp)
         qemu_mutex_init(&p->mutex);
         qemu_sem_init(&p->sem, 0);
         qemu_sem_init(&p->sem_sync, 0);
-        p->quit = false;
         p->pending_job = 0;
         p->id = i;
         p->pages = multifd_pages_init(page_count);
-- 
2.41.0



  parent reply	other threads:[~2023-10-22 20:13 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-22 20:12 [PATCH RFC 0/7] migration/multifd: quit unitifications and separate sync packet Peter Xu
2023-10-22 20:12 ` [PATCH RFC 1/7] migration: Drop stale comment for multifd zero copy Peter Xu
2023-10-23 14:16   ` Fabiano Rosas
2023-10-22 20:12 ` [PATCH RFC 2/7] migration: Fix error leak in multifd_tls_outgoing_handshake() Peter Xu
2023-10-23 14:17   ` Fabiano Rosas
2023-10-22 20:12 ` [PATCH RFC 3/7] migration: multifd_send_kick_main() Peter Xu
2023-10-23 14:43   ` Fabiano Rosas
2023-11-08 22:49   ` Fabiano Rosas
2023-11-09 16:50     ` Peter Xu
2023-11-09 17:00       ` Fabiano Rosas
2023-10-22 20:12 ` Peter Xu [this message]
2023-10-23 14:42   ` [PATCH RFC 4/7] migration: Drop MultiFDSendParams.quit and cleanup error paths Fabiano Rosas
2023-10-23 14:53     ` Peter Xu
2023-10-23 15:35       ` Fabiano Rosas
2023-10-23 15:54         ` Peter Xu
2023-10-22 20:12 ` [PATCH RFC 5/7] migration: Modulize multifd send threads with a few helpers Peter Xu
2023-10-22 20:12 ` [PATCH RFC 6/7] migration: Split multifd pending_job into two booleans Peter Xu
2023-10-23 15:15   ` Fabiano Rosas
2023-10-23 15:52     ` Peter Xu
2023-10-22 20:12 ` [PATCH RFC 7/7] migration: Further unify paths for multifd normal or sync requests Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231022201211.452861-5-peterx@redhat.com \
    --to=peterx@redhat.com \
    --cc=farosas@suse.de \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).