From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [PULL 19/24] kvm: i386: require KVM_CAP_XSAVE
Date: Thu, 26 Oct 2023 01:27:12 +0200 [thread overview]
Message-ID: <20231025232718.89428-20-pbonzini@redhat.com> (raw)
In-Reply-To: <20231025232718.89428-1-pbonzini@redhat.com>
This was introduced in KVM in Linux 2.6.36, and could already be used at
the time to save/restore FPU data even on older processor. We can require
it unconditionally and stop using KVM_GET/SET_FPU.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
target/i386/kvm/kvm.c | 70 ++-----------------------------------------
1 file changed, 2 insertions(+), 68 deletions(-)
diff --git a/target/i386/kvm/kvm.c b/target/i386/kvm/kvm.c
index b8fb74d7f17..513a90f6307 100644
--- a/target/i386/kvm/kvm.c
+++ b/target/i386/kvm/kvm.c
@@ -94,6 +94,7 @@ const KVMCapabilityInfo kvm_arch_required_capabilities[] = {
KVM_CAP_INFO(SIGNAL_MSI),
KVM_CAP_INFO(IRQ_ROUTING),
KVM_CAP_INFO(DEBUGREGS),
+ KVM_CAP_INFO(XSAVE),
KVM_CAP_LAST_INFO
};
@@ -137,7 +138,6 @@ static uint32_t has_architectural_pmu_version;
static uint32_t num_architectural_pmu_gp_counters;
static uint32_t num_architectural_pmu_fixed_counters;
-static int has_xsave;
static int has_xsave2;
static int has_xcrs;
static int has_pit_state2;
@@ -1714,10 +1714,8 @@ static void kvm_init_xsave(CPUX86State *env)
{
if (has_xsave2) {
env->xsave_buf_len = QEMU_ALIGN_UP(has_xsave2, 4096);
- } else if (has_xsave) {
- env->xsave_buf_len = sizeof(struct kvm_xsave);
} else {
- return;
+ env->xsave_buf_len = sizeof(struct kvm_xsave);
}
env->xsave_buf = qemu_memalign(4096, env->xsave_buf_len);
@@ -2592,7 +2590,6 @@ int kvm_arch_init(MachineState *ms, KVMState *s)
return ret;
}
- has_xsave = kvm_check_extension(s, KVM_CAP_XSAVE);
has_xcrs = kvm_check_extension(s, KVM_CAP_XCRS);
has_pit_state2 = kvm_check_extension(s, KVM_CAP_PIT_STATE2);
has_sregs2 = kvm_check_extension(s, KVM_CAP_SREGS2) > 0;
@@ -2877,40 +2874,11 @@ static int kvm_getput_regs(X86CPU *cpu, int set)
return ret;
}
-static int kvm_put_fpu(X86CPU *cpu)
-{
- CPUX86State *env = &cpu->env;
- struct kvm_fpu fpu;
- int i;
-
- memset(&fpu, 0, sizeof fpu);
- fpu.fsw = env->fpus & ~(7 << 11);
- fpu.fsw |= (env->fpstt & 7) << 11;
- fpu.fcw = env->fpuc;
- fpu.last_opcode = env->fpop;
- fpu.last_ip = env->fpip;
- fpu.last_dp = env->fpdp;
- for (i = 0; i < 8; ++i) {
- fpu.ftwx |= (!env->fptags[i]) << i;
- }
- memcpy(fpu.fpr, env->fpregs, sizeof env->fpregs);
- for (i = 0; i < CPU_NB_REGS; i++) {
- stq_p(&fpu.xmm[i][0], env->xmm_regs[i].ZMM_Q(0));
- stq_p(&fpu.xmm[i][8], env->xmm_regs[i].ZMM_Q(1));
- }
- fpu.mxcsr = env->mxcsr;
-
- return kvm_vcpu_ioctl(CPU(cpu), KVM_SET_FPU, &fpu);
-}
-
static int kvm_put_xsave(X86CPU *cpu)
{
CPUX86State *env = &cpu->env;
void *xsave = env->xsave_buf;
- if (!has_xsave) {
- return kvm_put_fpu(cpu);
- }
x86_cpu_xsave_all_areas(cpu, xsave, env->xsave_buf_len);
return kvm_vcpu_ioctl(CPU(cpu), KVM_SET_XSAVE, xsave);
@@ -3655,46 +3623,12 @@ static int kvm_put_msrs(X86CPU *cpu, int level)
}
-static int kvm_get_fpu(X86CPU *cpu)
-{
- CPUX86State *env = &cpu->env;
- struct kvm_fpu fpu;
- int i, ret;
-
- ret = kvm_vcpu_ioctl(CPU(cpu), KVM_GET_FPU, &fpu);
- if (ret < 0) {
- return ret;
- }
-
- env->fpstt = (fpu.fsw >> 11) & 7;
- env->fpus = fpu.fsw;
- env->fpuc = fpu.fcw;
- env->fpop = fpu.last_opcode;
- env->fpip = fpu.last_ip;
- env->fpdp = fpu.last_dp;
- for (i = 0; i < 8; ++i) {
- env->fptags[i] = !((fpu.ftwx >> i) & 1);
- }
- memcpy(env->fpregs, fpu.fpr, sizeof env->fpregs);
- for (i = 0; i < CPU_NB_REGS; i++) {
- env->xmm_regs[i].ZMM_Q(0) = ldq_p(&fpu.xmm[i][0]);
- env->xmm_regs[i].ZMM_Q(1) = ldq_p(&fpu.xmm[i][8]);
- }
- env->mxcsr = fpu.mxcsr;
-
- return 0;
-}
-
static int kvm_get_xsave(X86CPU *cpu)
{
CPUX86State *env = &cpu->env;
void *xsave = env->xsave_buf;
int type, ret;
- if (!has_xsave) {
- return kvm_get_fpu(cpu);
- }
-
type = has_xsave2 ? KVM_GET_XSAVE2 : KVM_GET_XSAVE;
ret = kvm_vcpu_ioctl(CPU(cpu), type, xsave);
if (ret < 0) {
--
2.41.0
next prev parent reply other threads:[~2023-10-25 23:30 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-25 23:26 [PULL 00/24] x86, KVM changes for 2023-10-26 Paolo Bonzini
2023-10-25 23:26 ` [PULL 01/24] tests/tcg: fix out-of-bounds access in test-avx Paolo Bonzini
2023-10-25 23:26 ` [PULL 02/24] target/i386: implement SHA instructions Paolo Bonzini
2023-10-25 23:26 ` [PULL 03/24] tests/tcg/i386: initialize more registers in test-avx Paolo Bonzini
2023-10-25 23:26 ` [PULL 04/24] tests/tcg/i386: test-avx: add test cases for SHA new instructions Paolo Bonzini
2023-10-25 23:26 ` [PULL 05/24] target/i386: group common checks in the decoding phase Paolo Bonzini
2023-10-25 23:26 ` [PULL 06/24] target/i386: validate VEX.W for AVX instructions Paolo Bonzini
2023-10-25 23:27 ` [PULL 07/24] target/i386: check CPUID_PAE to determine 36 bit processor address space Paolo Bonzini
2023-10-25 23:27 ` [PULL 08/24] kvm: remove unnecessary stub Paolo Bonzini
2023-10-25 23:27 ` [PULL 09/24] kvm: require KVM_CAP_INTERNAL_ERROR_DATA Paolo Bonzini
2023-10-25 23:27 ` [PULL 10/24] kvm: require KVM_CAP_SIGNAL_MSI Paolo Bonzini
2023-10-25 23:27 ` [PULL 11/24] kvm: require KVM_IRQFD for kernel irqchip Paolo Bonzini
2023-10-25 23:27 ` [PULL 12/24] " Paolo Bonzini
2023-10-25 23:27 ` [PULL 13/24] kvm: drop reference to KVM_CAP_PCI_2_3 Paolo Bonzini
2023-10-25 23:27 ` [PULL 14/24] kvm: assume that many ioeventfds can be created Paolo Bonzini
2023-10-25 23:27 ` [PULL 15/24] kvm: require KVM_CAP_IOEVENTFD and KVM_CAP_IOEVENTFD_ANY_LENGTH Paolo Bonzini
2023-10-25 23:27 ` [PULL 16/24] kvm: unify listeners for PIO address space Paolo Bonzini
2023-10-25 23:27 ` [PULL 17/24] kvm: i386: move KVM_CAP_IRQ_ROUTING detection to kvm_arch_required_capabilities Paolo Bonzini
2023-10-25 23:27 ` [PULL 18/24] kvm: i386: require KVM_CAP_DEBUGREGS Paolo Bonzini
2023-10-25 23:27 ` Paolo Bonzini [this message]
2023-10-25 23:27 ` [PULL 20/24] kvm: i386: require KVM_CAP_SET_VCPU_EVENTS and KVM_CAP_X86_ROBUST_SINGLESTEP Paolo Bonzini
2023-10-25 23:27 ` [PULL 21/24] kvm: i386: require KVM_CAP_MCE Paolo Bonzini
2023-10-25 23:27 ` [PULL 22/24] kvm: i386: require KVM_CAP_ADJUST_CLOCK Paolo Bonzini
2023-10-25 23:27 ` [PULL 23/24] kvm: i386: require KVM_CAP_SET_IDENTITY_MAP_ADDR Paolo Bonzini
2023-10-25 23:27 ` [PULL 24/24] kvm: i8254: require KVM_CAP_PIT2 and KVM_CAP_PIT_STATE2 Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231025232718.89428-20-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).