From: Bernhard Beschow <shentey@gmail.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
qemu-trivial@nongnu.org, "Stefan Hajnoczi" <stefanha@redhat.com>,
"Jean-Christophe Dubois" <jcd@tribudubois.net>,
qemu-arm@nongnu.org, "Andrey Smirnov" <andrew.smirnov@gmail.com>,
"Peter Xu" <peterx@redhat.com>,
"David Hildenbrand" <david@redhat.com>,
"Michael S. Tsirkin" <mst@redhat.com>,
"Mads Ynddal" <mads@ynddal.dk>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Bernhard Beschow" <shentey@gmail.com>
Subject: [PATCH 5/6] hw/i2c/pm_smbus: Convert DPRINTF to trace events
Date: Sat, 28 Oct 2023 14:24:14 +0200 [thread overview]
Message-ID: <20231028122415.14869-6-shentey@gmail.com> (raw)
In-Reply-To: <20231028122415.14869-1-shentey@gmail.com>
Let the trace messages slightly deviate from the function names
("smb" -> "smbus") being traced in order to avoid conflights with the SMB
protocol.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
---
hw/i2c/pm_smbus.c | 18 ++++--------------
hw/i2c/trace-events | 6 ++++++
2 files changed, 10 insertions(+), 14 deletions(-)
diff --git a/hw/i2c/pm_smbus.c b/hw/i2c/pm_smbus.c
index 4e1b8a5182..78e7c229a8 100644
--- a/hw/i2c/pm_smbus.c
+++ b/hw/i2c/pm_smbus.c
@@ -23,6 +23,7 @@
#include "hw/i2c/pm_smbus.h"
#include "hw/i2c/smbus_master.h"
#include "migration/vmstate.h"
+#include "trace.h"
#define SMBHSTSTS 0x00
#define SMBHSTCNT 0x02
@@ -64,15 +65,6 @@
#define AUX_BLK (1 << 1)
#define AUX_MASK 0x3
-/*#define DEBUG*/
-
-#ifdef DEBUG
-# define SMBUS_DPRINTF(format, ...) printf(format, ## __VA_ARGS__)
-#else
-# define SMBUS_DPRINTF(format, ...) do { } while (0)
-#endif
-
-
static void smb_transaction(PMSMBus *s)
{
uint8_t prot = (s->smb_ctl >> 2) & 0x07;
@@ -82,7 +74,7 @@ static void smb_transaction(PMSMBus *s)
I2CBus *bus = s->smbus;
int ret;
- SMBUS_DPRINTF("SMBus trans addr=0x%02x prot=0x%02x\n", addr, prot);
+ trace_smbus_transaction(addr, prot);
/* Transaction isn't exec if STS_DEV_ERR bit set */
if ((s->smb_stat & STS_DEV_ERR) != 0) {
goto error;
@@ -258,8 +250,7 @@ static void smb_ioport_writeb(void *opaque, hwaddr addr, uint64_t val,
PMSMBus *s = opaque;
uint8_t clear_byte_done;
- SMBUS_DPRINTF("SMB writeb port=0x%04" HWADDR_PRIx
- " val=0x%02" PRIx64 "\n", addr, val);
+ trace_smbus_ioport_writeb(addr, val);
switch(addr) {
case SMBHSTSTS:
clear_byte_done = s->smb_stat & val & STS_BYTE_DONE;
@@ -429,8 +420,7 @@ static uint64_t smb_ioport_readb(void *opaque, hwaddr addr, unsigned width)
val = 0;
break;
}
- SMBUS_DPRINTF("SMB readb port=0x%04" HWADDR_PRIx " val=0x%02x\n",
- addr, val);
+ trace_smbus_ioport_readb(addr, val);
if (s->set_irq) {
s->set_irq(s, smb_irq_value(s));
diff --git a/hw/i2c/trace-events b/hw/i2c/trace-events
index d7b1e25858..6900e06eda 100644
--- a/hw/i2c/trace-events
+++ b/hw/i2c/trace-events
@@ -15,6 +15,12 @@ i2c_send_async(uint8_t address, uint8_t data) "send_async(addr:0x%02x) data:0x%0
i2c_recv(uint8_t address, uint8_t data) "recv(addr:0x%02x) data:0x%02x"
i2c_ack(void) ""
+# pm_smbus.c
+
+smbus_ioport_readb(uint16_t addr, uint8_t data) "[0x%04" PRIx16 "] -> val=0x%02x"
+smbus_ioport_writeb(uint16_t addr, uint8_t data) "[0x%04" PRIx16 "] <- val=0x%02x"
+smbus_transaction(uint8_t addr, uint8_t prot) "addr=0x%02x prot=0x%02x"
+
# allwinner_i2c.c
allwinner_i2c_read(const char* reg_name, uint64_t offset, uint64_t value) "read %s [0x%" PRIx64 "]: -> 0x%" PRIx64
--
2.42.0
next prev parent reply other threads:[~2023-10-28 12:26 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-28 12:24 [PATCH 0/6] Various tracing patches Bernhard Beschow
2023-10-28 12:24 ` [PATCH 1/6] hw/watchdog/wdt_imx2: Trace MMIO access Bernhard Beschow
2023-10-30 3:17 ` Philippe Mathieu-Daudé
2023-10-28 12:24 ` [PATCH 2/6] hw/watchdog/wdt_imx2: Trace timer activity Bernhard Beschow
2023-10-28 12:24 ` [PATCH 3/6] hw/misc/imx7_snvs: Trace MMIO access Bernhard Beschow
2023-10-30 3:18 ` Philippe Mathieu-Daudé
2023-10-28 12:24 ` [PATCH 4/6] hw/misc/imx6_ccm: Convert DPRINTF to trace events Bernhard Beschow
2023-10-30 3:23 ` Philippe Mathieu-Daudé
2023-10-28 12:24 ` Bernhard Beschow [this message]
2023-10-30 3:25 ` [PATCH 5/6] hw/i2c/pm_smbus: " Philippe Mathieu-Daudé
2023-10-31 22:08 ` Corey Minyard
2023-10-28 12:24 ` [PATCH 6/6] system/memory: Trace names of MemoryRegions rather than host pointers Bernhard Beschow
2023-10-30 3:36 ` Philippe Mathieu-Daudé
2023-11-02 9:05 ` Bernhard Beschow
2023-10-31 16:17 ` [PATCH 0/6] Various tracing patches Peter Maydell
2023-11-01 17:37 ` Bernhard Beschow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231028122415.14869-6-shentey@gmail.com \
--to=shentey@gmail.com \
--cc=andrew.smirnov@gmail.com \
--cc=david@redhat.com \
--cc=jcd@tribudubois.net \
--cc=mads@ynddal.dk \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=peterx@redhat.com \
--cc=philmd@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-trivial@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).