qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: kvm@vger.kernel.org, qemu-s390x@nongnu.org,
	qemu-block@nongnu.org, qemu-riscv@nongnu.org,
	qemu-ppc@nongnu.org, qemu-arm@nongnu.org,
	"Fiona Ebner" <f.ebner@proxmox.com>,
	"Philippe Mathieu-Daudé" <philmd@linaro.org>,
	"John Snow" <jsnow@redhat.com>, "Thomas Huth" <thuth@redhat.com>,
	"Laurent Vivier" <lvivier@redhat.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>
Subject: [PULL 48/60] tests/qtest: ahci-test: add test exposing reset issue with pending callback
Date: Mon,  6 Nov 2023 12:03:20 +0100	[thread overview]
Message-ID: <20231106110336.358-49-philmd@linaro.org> (raw)
In-Reply-To: <20231106110336.358-1-philmd@linaro.org>

From: Fiona Ebner <f.ebner@proxmox.com>

Before commit "hw/ide: reset: cancel async DMA operation before
resetting state", this test would fail, because a reset with a
pending write operation would lead to an unsolicited write to the
first sector of the disk.

The test writes a pattern to the beginning of the disk and verifies
that it is still intact after a reset with a pending operation. It
also checks that the pending operation actually completes correctly.

Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20230906130922.142845-2-f.ebner@proxmox.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 tests/qtest/ahci-test.c | 86 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 85 insertions(+), 1 deletion(-)

diff --git a/tests/qtest/ahci-test.c b/tests/qtest/ahci-test.c
index eea8b5f77b..5a1923f721 100644
--- a/tests/qtest/ahci-test.c
+++ b/tests/qtest/ahci-test.c
@@ -1424,6 +1424,89 @@ static void test_reset(void)
     ahci_shutdown(ahci);
 }
 
+static void test_reset_pending_callback(void)
+{
+    AHCIQState *ahci;
+    AHCICommand *cmd;
+    uint8_t port;
+    uint64_t ptr1;
+    uint64_t ptr2;
+
+    int bufsize = 4 * 1024;
+    int speed = bufsize + (bufsize / 2);
+    int offset1 = 0;
+    int offset2 = bufsize / AHCI_SECTOR_SIZE;
+
+    g_autofree unsigned char *tx1 = g_malloc(bufsize);
+    g_autofree unsigned char *tx2 = g_malloc(bufsize);
+    g_autofree unsigned char *rx1 = g_malloc0(bufsize);
+    g_autofree unsigned char *rx2 = g_malloc0(bufsize);
+
+    /* Uses throttling to make test independent of specific environment. */
+    ahci = ahci_boot_and_enable("-drive if=none,id=drive0,file=%s,"
+                                "cache=writeback,format=%s,"
+                                "throttling.bps-write=%d "
+                                "-M q35 "
+                                "-device ide-hd,drive=drive0 ",
+                                tmp_path, imgfmt, speed);
+
+    port = ahci_port_select(ahci);
+    ahci_port_clear(ahci, port);
+
+    ptr1 = ahci_alloc(ahci, bufsize);
+    ptr2 = ahci_alloc(ahci, bufsize);
+
+    g_assert(ptr1 && ptr2);
+
+    /* Need two different patterns. */
+    do {
+        generate_pattern(tx1, bufsize, AHCI_SECTOR_SIZE);
+        generate_pattern(tx2, bufsize, AHCI_SECTOR_SIZE);
+    } while (memcmp(tx1, tx2, bufsize) == 0);
+
+    qtest_bufwrite(ahci->parent->qts, ptr1, tx1, bufsize);
+    qtest_bufwrite(ahci->parent->qts, ptr2, tx2, bufsize);
+
+    /* Write to beginning of disk to check it wasn't overwritten later. */
+    ahci_guest_io(ahci, port, CMD_WRITE_DMA_EXT, ptr1, bufsize, offset1);
+
+    /* Issue asynchronously to get a pending callback during reset. */
+    cmd = ahci_command_create(CMD_WRITE_DMA_EXT);
+    ahci_command_adjust(cmd, offset2, ptr2, bufsize, 0);
+    ahci_command_commit(ahci, cmd, port);
+    ahci_command_issue_async(ahci, cmd);
+
+    ahci_set(ahci, AHCI_GHC, AHCI_GHC_HR);
+
+    ahci_command_free(cmd);
+
+    /* Wait for throttled write to finish. */
+    sleep(1);
+
+    /* Start again. */
+    ahci_clean_mem(ahci);
+    ahci_pci_enable(ahci);
+    ahci_hba_enable(ahci);
+    port = ahci_port_select(ahci);
+    ahci_port_clear(ahci, port);
+
+    /* Read and verify. */
+    ahci_guest_io(ahci, port, CMD_READ_DMA_EXT, ptr1, bufsize, offset1);
+    qtest_bufread(ahci->parent->qts, ptr1, rx1, bufsize);
+    g_assert_cmphex(memcmp(tx1, rx1, bufsize), ==, 0);
+
+    ahci_guest_io(ahci, port, CMD_READ_DMA_EXT, ptr2, bufsize, offset2);
+    qtest_bufread(ahci->parent->qts, ptr2, rx2, bufsize);
+    g_assert_cmphex(memcmp(tx2, rx2, bufsize), ==, 0);
+
+    ahci_free(ahci, ptr1);
+    ahci_free(ahci, ptr2);
+
+    ahci_clean_mem(ahci);
+
+    ahci_shutdown(ahci);
+}
+
 static void test_ncq_simple(void)
 {
     AHCIQState *ahci;
@@ -1945,7 +2028,8 @@ int main(int argc, char **argv)
     qtest_add_func("/ahci/migrate/dma/halted", test_migrate_halted_dma);
 
     qtest_add_func("/ahci/max", test_max);
-    qtest_add_func("/ahci/reset", test_reset);
+    qtest_add_func("/ahci/reset/simple", test_reset);
+    qtest_add_func("/ahci/reset/pending_callback", test_reset_pending_callback);
 
     qtest_add_func("/ahci/io/ncq/simple", test_ncq_simple);
     qtest_add_func("/ahci/migrate/ncq/simple", test_migrate_ncq);
-- 
2.41.0



  parent reply	other threads:[~2023-11-06 11:33 UTC|newest]

Thread overview: 63+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-06 11:02 [PULL 00/60] Misc HW/UI patches for 2023-11-06 Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 01/60] vl: Free machine list Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 02/60] vl: constify default_list Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 03/60] tests/vm/ubuntu.aarch64: Correct comment about TCG specific delay Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 04/60] tests/unit/test-seccomp: Remove mentions of softmmu in test names Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 05/60] accel/tcg: Declare tcg_flush_jmp_cache() in 'exec/tb-flush.h' Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 06/60] accel: Introduce cpu_exec_reset_hold() Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 07/60] accel/tcg: Factor tcg_cpu_reset_hold() out Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 08/60] target: Unify QOM style Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 09/60] target: Mention 'cpu-qom.h' is target agnostic Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 10/60] target/arm: Move internal declarations from 'cpu-qom.h' to 'cpu.h' Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 11/60] target/ppc: Remove CPU_RESOLVING_TYPE from 'cpu-qom.h' Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 12/60] target/riscv: " Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 13/60] target: Declare FOO_CPU_TYPE_NAME/SUFFIX in 'cpu-qom.h' Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 14/60] target/hexagon: Declare QOM definitions " Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 15/60] target/loongarch: " Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 16/60] target/nios2: " Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 17/60] target/openrisc: " Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 18/60] target/riscv: Move TYPE_RISCV_CPU_BASE definition to 'cpu.h' Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 19/60] target/ppc: Use env_archcpu() in helper_book3s_msgsndp() Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 20/60] target/riscv: Use env_archcpu() in [check_]nanbox() Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 21/60] target/s390x: Use env_archcpu() in handle_diag_308() Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 22/60] target/xtensa: Use env_archcpu() in update_c[compare|count]() Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 23/60] target/i386/hvf: Use x86_cpu in simulate_[rdmsr|wrmsr]() Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 24/60] target/i386/hvf: Use env_archcpu() in simulate_[rdmsr/wrmsr]() Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 25/60] target/i386/hvf: Use CPUState typedef Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 26/60] target/i386/hvf: Rename 'CPUState *cpu' variable as 'cs' Philippe Mathieu-Daudé
2023-11-06 11:02 ` [PULL 27/60] target/i386/hvf: Rename 'X86CPU *x86_cpu' variable as 'cpu' Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 28/60] target/i386/kvm: Correct comment in kvm_cpu_realize() Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 29/60] target/i386/monitor: synchronize cpu state for lapic info Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 30/60] target/mips: Fix MSA BZ/BNZ opcodes displacement Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 31/60] target/mips: Fix TX79 LQ/SQ opcodes Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 32/60] sysemu/kvm: Restrict kvmppc_get_radix_page_info() to ppc targets Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 33/60] hw/ppc/e500: Restrict ppce500_init_mpic_kvm() to KVM Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 34/60] target/ppc: Restrict KVM objects to system emulation Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 35/60] target/ppc: Prohibit target specific KVM prototypes on user emulation Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 36/60] target/nios2: Create IRQs *after* accelerator vCPU is realized Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 37/60] target/alpha: Tidy up alpha_cpu_class_by_name() Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 38/60] hw/cpu: Call object_class_is_abstract() once in cpu_class_by_name() Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 39/60] exec/cpu: Have cpu_exec_realize() return a boolean Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 40/60] hw/cpu: Clean up global variable shadowing Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 41/60] hw/loader: Clean up global variable shadowing in rom_add_file() Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 42/60] hw/isa/i82378: Propagate error if PC_SPEAKER device creation failed Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 43/60] hw/i386: Fix comment style in topology.h Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 44/60] tests/unit: Rename test-x86-cpuid.c to test-x86-topo.c Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 45/60] system/cpus: Fix CPUState.nr_cores' calculation Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 46/60] hw/cpu: Update the comments of nr_cores and nr_dies Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 47/60] hw/ide: reset: cancel async DMA operation before resetting state Philippe Mathieu-Daudé
2023-11-06 11:03 ` Philippe Mathieu-Daudé [this message]
2023-11-06 11:03 ` [PULL 49/60] hw/i2c: pmbus add support for block receive Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 50/60] hw/i2c: pmbus: add vout mode bitfields Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 51/60] hw/i2c: pmbus: add fan support Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 52/60] hw/i2c: pmbus: add VCAP register Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 53/60] hw/sensor: add ADM1266 device model Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 54/60] tests/qtest: add tests for ADM1266 Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 55/60] hw/i2c: pmbus: immediately clear faults on request Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 56/60] hw/i2c: pmbus: reset page register for out of range reads Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 57/60] MAINTAINERS: Add include/hw/timer/tmu012.h to the SH4 R2D section Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 58/60] MAINTAINERS: Add the CAN documentation file to the CAN section Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 59/60] MAINTAINERS: update libvirt devel mailing list address Philippe Mathieu-Daudé
2023-11-06 11:03 ` [PULL 60/60] ui/sdl2: use correct key names in win title on mac Philippe Mathieu-Daudé
2023-11-07  1:39 ` [PULL 00/60] Misc HW/UI patches for 2023-11-06 Stefan Hajnoczi
2023-11-07  8:51   ` Philippe Mathieu-Daudé

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231106110336.358-49-philmd@linaro.org \
    --to=philmd@linaro.org \
    --cc=f.ebner@proxmox.com \
    --cc=jsnow@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=lvivier@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    --cc=qemu-riscv@nongnu.org \
    --cc=qemu-s390x@nongnu.org \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).