qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: nifan.cxl@gmail.com
To: qemu-devel@nongnu.org
Cc: jonathan.cameron@huawei.com, linux-cxl@vger.kernel.org,
	ira.weiny@intel.com, dan.j.williams@intel.com,
	a.manzanares@samsung.com, dave@stgolabs.net,
	nmtadam.samsung@gmail.com, nifan@outlook.com,
	jim.harris@samsung.com, Fan Ni <fan.ni@samsung.com>
Subject: [PATCH v3 2/9] hw/cxl/cxl-mailbox-utils: Add dynamic capacity region representative and mailbox command support
Date: Tue,  7 Nov 2023 10:07:06 -0800	[thread overview]
Message-ID: <20231107180907.553451-3-nifan.cxl@gmail.com> (raw)
In-Reply-To: <20231107180907.553451-1-nifan.cxl@gmail.com>

From: Fan Ni <fan.ni@samsung.com>

Per cxl spec 3.0, add dynamic capacity region representative based on
Table 8-126 and extend the cxl type3 device definition to include dc region
information. Also, based on info in 8.2.9.8.9.1, add 'Get Dynamic Capacity
Configuration' mailbox support.

Note: decode_len of a dc region is aligned to 256*MiB, need to be divided by
256 * MiB before returned to the host for "Get Dynamic Capacity Configuration"
mailbox command.

Signed-off-by: Fan Ni <fan.ni@samsung.com>
---
 hw/cxl/cxl-mailbox-utils.c  | 80 +++++++++++++++++++++++++++++++++++++
 hw/mem/cxl_type3.c          |  6 +++
 include/hw/cxl/cxl_device.h | 17 ++++++++
 3 files changed, 103 insertions(+)

diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index 8eceedfa87..f80dd6474f 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -80,6 +80,8 @@ enum {
         #define GET_POISON_LIST        0x0
         #define INJECT_POISON          0x1
         #define CLEAR_POISON           0x2
+    DCD_CONFIG  = 0x48,
+        #define GET_DC_CONFIG          0x0
     PHYSICAL_SWITCH = 0x51,
         #define IDENTIFY_SWITCH_DEVICE      0x0
         #define GET_PHYSICAL_PORT_STATE     0x1
@@ -1210,6 +1212,74 @@ static CXLRetCode cmd_media_clear_poison(const struct cxl_cmd *cmd,
     return CXL_MBOX_SUCCESS;
 }
 
+/*
+ * CXL r3.0 section 8.2.9.8.9.1: Get Dynamic Capacity Configuration
+ * (Opcode: 4800h)
+ */
+static CXLRetCode cmd_dcd_get_dyn_cap_config(const struct cxl_cmd *cmd,
+                                             uint8_t *payload_in,
+                                             size_t len_in,
+                                             uint8_t *payload_out,
+                                             size_t *len_out,
+                                             CXLCCI *cci)
+{
+    CXLType3Dev *ct3d = CXL_TYPE3(cci->d);
+    struct get_dyn_cap_config_in_pl {
+        uint8_t region_cnt;
+        uint8_t start_region_id;
+    } QEMU_PACKED;
+
+    struct get_dyn_cap_config_out_pl {
+        uint8_t num_regions;
+        uint8_t rsvd1[7];
+        struct {
+            uint64_t base;
+            uint64_t decode_len;
+            uint64_t region_len;
+            uint64_t block_size;
+            uint32_t dsmadhandle;
+            uint8_t flags;
+            uint8_t rsvd2[3];
+        } QEMU_PACKED records[];
+    } QEMU_PACKED;
+
+    struct get_dyn_cap_config_in_pl *in = (void *)payload_in;
+    struct get_dyn_cap_config_out_pl *out = (void *)payload_out;
+    uint16_t record_count = 0, i;
+    uint16_t out_pl_len;
+    uint8_t start_region_id = in->start_region_id;
+
+    if (start_region_id >= ct3d->dc.num_regions) {
+        return CXL_MBOX_INVALID_INPUT;
+    }
+
+    record_count = MIN(ct3d->dc.num_regions - in->start_region_id,
+            in->region_cnt);
+
+    out_pl_len = sizeof(*out) + record_count * sizeof(out->records[0]);
+    assert(out_pl_len <= CXL_MAILBOX_MAX_PAYLOAD_SIZE);
+
+    memset(out, 0, out_pl_len);
+    out->num_regions = record_count;
+    for (i = 0; i < record_count; i++) {
+        stq_le_p(&out->records[i].base,
+                ct3d->dc.regions[start_region_id + i].base);
+        stq_le_p(&out->records[i].decode_len,
+                ct3d->dc.regions[start_region_id + i].decode_len /
+                CXL_CAPACITY_MULTIPLIER);
+        stq_le_p(&out->records[i].region_len,
+                ct3d->dc.regions[start_region_id + i].len);
+        stq_le_p(&out->records[i].block_size,
+                ct3d->dc.regions[start_region_id + i].block_size);
+        stl_le_p(&out->records[i].dsmadhandle,
+                ct3d->dc.regions[start_region_id + i].dsmadhandle);
+        out->records[i].flags = ct3d->dc.regions[start_region_id + i].flags;
+    }
+
+    *len_out = out_pl_len;
+    return CXL_MBOX_SUCCESS;
+}
+
 #define IMMEDIATE_CONFIG_CHANGE (1 << 1)
 #define IMMEDIATE_DATA_CHANGE (1 << 2)
 #define IMMEDIATE_POLICY_CHANGE (1 << 3)
@@ -1254,6 +1324,11 @@ static const struct cxl_cmd cxl_cmd_set[256][256] = {
         cmd_media_clear_poison, 72, 0 },
 };
 
+static const struct cxl_cmd cxl_cmd_set_dcd[256][256] = {
+    [DCD_CONFIG][GET_DC_CONFIG] = { "DCD_GET_DC_CONFIG",
+        cmd_dcd_get_dyn_cap_config, 2, 0 },
+};
+
 static const struct cxl_cmd cxl_cmd_set_sw[256][256] = {
     [INFOSTAT][IS_IDENTIFY] = { "IDENTIFY", cmd_infostat_identify, 0, 18 },
     [INFOSTAT][BACKGROUND_OPERATION_STATUS] = { "BACKGROUND_OPERATION_STATUS",
@@ -1465,7 +1540,12 @@ void cxl_initialize_mailbox_swcci(CXLCCI *cci, DeviceState *intf,
 
 void cxl_initialize_mailbox_t3(CXLCCI *cci, DeviceState *d, size_t payload_max)
 {
+    CXLType3Dev *ct3d = CXL_TYPE3(d);
+
     cxl_copy_cci_commands(cci, cxl_cmd_set);
+    if (ct3d->dc.num_regions) {
+        cxl_copy_cci_commands(cci, cxl_cmd_set_dcd);
+    }
     cci->d = d;
 
     /* No separation for PCI MB as protocol handled in PCI device */
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index 7b4d1ee774..6c1ccda159 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -1075,6 +1075,12 @@ static void ct3d_reset(DeviceState *dev)
     uint32_t *reg_state = ct3d->cxl_cstate.crb.cache_mem_registers;
     uint32_t *write_msk = ct3d->cxl_cstate.crb.cache_mem_regs_write_mask;
 
+    if (ct3d->dc.num_regions) {
+        ct3d->cxl_dstate.is_dcd = true;
+    } else {
+        ct3d->cxl_dstate.is_dcd = false;
+    }
+
     cxl_component_register_init_common(reg_state, write_msk, CXL2_TYPE3_DEVICE);
     cxl_device_register_init_t3(ct3d);
 
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 4f2ef0b899..334c51fddb 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -235,6 +235,7 @@ typedef struct cxl_device_state {
     uint64_t mem_size;
     uint64_t pmem_size;
     uint64_t vmem_size;
+    bool is_dcd;
 
     const struct cxl_cmd (*cxl_cmd_set)[256];
     CPMUState cpmu[CXL_NUM_CPMU_INSTANCES];
@@ -417,6 +418,17 @@ typedef struct CXLPoison {
 typedef QLIST_HEAD(, CXLPoison) CXLPoisonList;
 #define CXL_POISON_LIST_LIMIT 256
 
+#define DCD_MAX_REGION_NUM 8
+
+typedef struct CXLDCDRegion {
+    uint64_t base;
+    uint64_t decode_len; /* aligned to 256*MiB */
+    uint64_t len;
+    uint64_t block_size;
+    uint32_t dsmadhandle;
+    uint8_t flags;
+} CXLDCDRegion;
+
 struct CXLType3Dev {
     /* Private */
     PCIDevice parent_obj;
@@ -453,6 +465,11 @@ struct CXLType3Dev {
     unsigned int poison_list_cnt;
     bool poison_list_overflowed;
     uint64_t poison_list_overflow_ts;
+
+    struct dynamic_capacity {
+        uint8_t num_regions; /* 0-8 regions */
+        CXLDCDRegion regions[DCD_MAX_REGION_NUM];
+    } dc;
 };
 
 #define TYPE_CXL_TYPE3 "cxl-type3"
-- 
2.42.0



  parent reply	other threads:[~2023-11-07 18:10 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-07 18:07 [PATCH v3 0/9] Enabling DCD emulation support in Qemu nifan.cxl
2023-11-07 18:07 ` [PATCH v3 1/9] hw/cxl/cxl-mailbox-utils: Add dc_event_log_size field to output payload of identify memory device command nifan.cxl
2023-11-07 18:07 ` nifan.cxl [this message]
2024-01-24 14:51   ` [PATCH v3 2/9] hw/cxl/cxl-mailbox-utils: Add dynamic capacity region representative and mailbox command support Jonathan Cameron via
2024-01-29 17:32     ` fan
2024-01-30  9:44       ` Jonathan Cameron via
2024-02-01 19:58     ` fan
2024-02-02 11:52       ` Jonathan Cameron via
2024-01-24 15:48   ` Jonathan Cameron via
2023-11-07 18:07 ` [PATCH v3 3/9] include/hw/cxl/cxl_device: Rename mem_size as static_mem_size for type3 memory devices nifan.cxl
2024-01-24 14:54   ` Jonathan Cameron via
2023-11-07 18:07 ` [PATCH v3 4/9] hw/mem/cxl_type3: Add support to create DC regions to " nifan.cxl
2024-01-24 15:23   ` Jonathan Cameron via
2024-01-26 13:00     ` Jonathan Cameron via
2023-11-07 18:07 ` [PATCH v3 5/9] hw/mem/cxl_type3: Add host backend and address space handling for DC regions nifan.cxl
2024-01-24 15:47   ` Jonathan Cameron via
2024-02-06 22:24     ` fan
2024-02-13  9:28       ` Jonathan Cameron via
2023-11-07 18:07 ` [PATCH v3 6/9] hw/mem/cxl_type3: Add DC extent list representative and get DC extent list mailbox support nifan.cxl
2024-01-24 15:56   ` Jonathan Cameron via
2023-11-07 18:07 ` [PATCH v3 7/9] hw/cxl/cxl-mailbox-utils: Add mailbox commands to support add/release dynamic capacity response nifan.cxl
2024-01-24 16:23   ` Jonathan Cameron via
2023-11-07 18:07 ` [PATCH v3 8/9] hw/cxl/events: Add qmp interfaces to add/release dynamic capacity extents nifan.cxl
2024-01-24 16:50   ` Jonathan Cameron via
2024-02-08 19:17     ` fan
2024-02-13  9:29       ` Jonathan Cameron via
2024-02-13 17:44   ` Jonathan Cameron via
2024-02-13 18:21     ` fan
2023-11-07 18:07 ` [PATCH v3 9/9] hw/mem/cxl_type3: Add dpa range validation for accesses to dc regions nifan.cxl
2024-01-24 16:58   ` Jonathan Cameron via
2024-02-09 19:04     ` fan
2024-02-13  9:31       ` Jonathan Cameron via
2023-11-17  0:09 ` [PATCH v3 0/9] Enabling DCD emulation support in Qemu Ira Weiny
2024-01-26 15:21   ` Jonathan Cameron via
2024-02-13 18:18 ` fan
2024-02-19 16:18   ` Jonathan Cameron via

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231107180907.553451-3-nifan.cxl@gmail.com \
    --to=nifan.cxl@gmail.com \
    --cc=a.manzanares@samsung.com \
    --cc=dan.j.williams@intel.com \
    --cc=dave@stgolabs.net \
    --cc=fan.ni@samsung.com \
    --cc=ira.weiny@intel.com \
    --cc=jim.harris@samsung.com \
    --cc=jonathan.cameron@huawei.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=nifan@outlook.com \
    --cc=nmtadam.samsung@gmail.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).