From: Zhao Liu <zhao1.liu@linux.intel.com>
To: Eduardo Habkost <eduardo@habkost.net>,
Marcel Apfelbaum <marcel.apfelbaum@gmail.com>,
"Michael S . Tsirkin" <mst@redhat.com>,
Richard Henderson <richard.henderson@linaro.org>,
Paolo Bonzini <pbonzini@redhat.com>,
Marcelo Tosatti <mtosatti@redhat.com>
Cc: qemu-devel@nongnu.org, kvm@vger.kernel.org,
Zhenyu Wang <zhenyu.z.wang@intel.com>,
Zhuocheng Ding <zhuocheng.ding@intel.com>,
Babu Moger <babu.moger@amd.com>,
Yongwei Ma <yongwei.ma@intel.com>, Zhao Liu <zhao1.liu@intel.com>,
Robert Hoo <robert.hu@linux.intel.com>
Subject: [PATCH v6 02/16] i386/cpu: Use APIC ID offset to encode cache topo in CPUID[4]
Date: Fri, 17 Nov 2023 15:50:52 +0800 [thread overview]
Message-ID: <20231117075106.432499-3-zhao1.liu@linux.intel.com> (raw)
In-Reply-To: <20231117075106.432499-1-zhao1.liu@linux.intel.com>
From: Zhao Liu <zhao1.liu@intel.com>
Refer to the fixes of cache_info_passthrough ([1], [2]) and SDM, the
CPUID.04H:EAX[bits 25:14] and CPUID.04H:EAX[bits 31:26] should use the
nearest power-of-2 integer.
The nearest power-of-2 integer can be calculated by pow2ceil() or by
using APIC ID offset (like L3 topology using 1 << die_offset [3]).
But in fact, CPUID.04H:EAX[bits 25:14] and CPUID.04H:EAX[bits 31:26]
are associated with APIC ID. For example, in linux kernel, the field
"num_threads_sharing" (Bits 25 - 14) is parsed with APIC ID. And for
another example, on Alder Lake P, the CPUID.04H:EAX[bits 31:26] is not
matched with actual core numbers and it's calculated by:
"(1 << (pkg_offset - core_offset)) - 1".
Therefore the offset of APIC ID should be preferred to calculate nearest
power-of-2 integer for CPUID.04H:EAX[bits 25:14] and CPUID.04H:EAX[bits
31:26]:
1. d/i cache is shared in a core, 1 << core_offset should be used
instand of "cs->nr_threads" in encode_cache_cpuid4() for
CPUID.04H.00H:EAX[bits 25:14] and CPUID.04H.01H:EAX[bits 25:14].
2. L2 cache is supposed to be shared in a core as for now, thereby
1 << core_offset should also be used instand of "cs->nr_threads" in
encode_cache_cpuid4() for CPUID.04H.02H:EAX[bits 25:14].
3. Similarly, the value for CPUID.04H:EAX[bits 31:26] should also be
calculated with the bit width between the Package and SMT levels in
the APIC ID (1 << (pkg_offset - core_offset) - 1).
In addition, use APIC ID offset to replace "pow2ceil()" for
cache_info_passthrough case.
[1]: efb3934adf9e ("x86: cpu: make sure number of addressable IDs for processor cores meets the spec")
[2]: d7caf13b5fcf ("x86: cpu: fixup number of addressable IDs for logical processors sharing cache")
[3]: d65af288a84d ("i386: Update new x86_apicid parsing rules with die_offset support")
Fixes: 7e3482f82480 ("i386: Helpers to encode cache information consistently")
Suggested-by: Robert Hoo <robert.hu@linux.intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
---
Changes since v3:
* Fix compile warnings. (Babu)
* Fix spelling typo.
Changes since v1:
* Use APIC ID offset to replace "pow2ceil()" for cache_info_passthrough
case. (Yanan)
* Split the L1 cache fix into a separate patch.
* Rename the title of this patch (the original is "i386/cpu: Fix number
of addressable IDs in CPUID.04H").
---
target/i386/cpu.c | 30 +++++++++++++++++++++++-------
1 file changed, 23 insertions(+), 7 deletions(-)
diff --git a/target/i386/cpu.c b/target/i386/cpu.c
index 4a3621cc995a..069f0b1f19a0 100644
--- a/target/i386/cpu.c
+++ b/target/i386/cpu.c
@@ -6013,7 +6013,6 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,
{
X86CPU *cpu = env_archcpu(env);
CPUState *cs = env_cpu(env);
- uint32_t die_offset;
uint32_t limit;
uint32_t signature[3];
X86CPUTopoInfo topo_info;
@@ -6097,39 +6096,56 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,
int host_vcpus_per_cache = 1 + ((*eax & 0x3FFC000) >> 14);
int vcpus_per_socket = cs->nr_cores * cs->nr_threads;
if (cs->nr_cores > 1) {
+ int addressable_cores_offset =
+ apicid_pkg_offset(&topo_info) -
+ apicid_core_offset(&topo_info);
+
*eax &= ~0xFC000000;
- *eax |= (pow2ceil(cs->nr_cores) - 1) << 26;
+ *eax |= (1 << (addressable_cores_offset - 1)) << 26;
}
if (host_vcpus_per_cache > vcpus_per_socket) {
+ int pkg_offset = apicid_pkg_offset(&topo_info);
+
*eax &= ~0x3FFC000;
- *eax |= (pow2ceil(vcpus_per_socket) - 1) << 14;
+ *eax |= (1 << (pkg_offset - 1)) << 14;
}
}
} else if (cpu->vendor_cpuid_only && IS_AMD_CPU(env)) {
*eax = *ebx = *ecx = *edx = 0;
} else {
*eax = 0;
+ int addressable_cores_offset = apicid_pkg_offset(&topo_info) -
+ apicid_core_offset(&topo_info);
+ int core_offset, die_offset;
+
switch (count) {
case 0: /* L1 dcache info */
+ core_offset = apicid_core_offset(&topo_info);
encode_cache_cpuid4(env->cache_info_cpuid4.l1d_cache,
- cs->nr_threads, cs->nr_cores,
+ (1 << core_offset),
+ (1 << addressable_cores_offset),
eax, ebx, ecx, edx);
break;
case 1: /* L1 icache info */
+ core_offset = apicid_core_offset(&topo_info);
encode_cache_cpuid4(env->cache_info_cpuid4.l1i_cache,
- cs->nr_threads, cs->nr_cores,
+ (1 << core_offset),
+ (1 << addressable_cores_offset),
eax, ebx, ecx, edx);
break;
case 2: /* L2 cache info */
+ core_offset = apicid_core_offset(&topo_info);
encode_cache_cpuid4(env->cache_info_cpuid4.l2_cache,
- cs->nr_threads, cs->nr_cores,
+ (1 << core_offset),
+ (1 << addressable_cores_offset),
eax, ebx, ecx, edx);
break;
case 3: /* L3 cache info */
die_offset = apicid_die_offset(&topo_info);
if (cpu->enable_l3_cache) {
encode_cache_cpuid4(env->cache_info_cpuid4.l3_cache,
- (1 << die_offset), cs->nr_cores,
+ (1 << die_offset),
+ (1 << addressable_cores_offset),
eax, ebx, ecx, edx);
break;
}
--
2.34.1
next prev parent reply other threads:[~2023-11-17 7:40 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-17 7:50 [PATCH v6 00/16] Support smp.clusters for x86 in QEMU Zhao Liu
2023-11-17 7:50 ` [PATCH v6 01/16] i386/cpu: Fix i/d-cache topology to core level for Intel CPU Zhao Liu
2023-11-17 7:50 ` Zhao Liu [this message]
2023-11-17 7:50 ` [PATCH v6 03/16] i386/cpu: Consolidate the use of topo_info in cpu_x86_cpuid() Zhao Liu
2023-11-17 7:50 ` [PATCH v6 04/16] i386: Split topology types of CPUID[0x1F] from the definitions of CPUID[0xB] Zhao Liu
2023-11-17 7:50 ` [PATCH v6 05/16] i386: Decouple CPUID[0x1F] subleaf with specific topology level Zhao Liu
2023-11-17 7:50 ` [PATCH v6 06/16] i386: Introduce module-level cpu topology to CPUX86State Zhao Liu
2023-11-17 7:50 ` [PATCH v6 07/16] i386: Support modules_per_die in X86CPUTopoInfo Zhao Liu
2023-11-17 7:50 ` [PATCH v6 08/16] i386: Expose module level in CPUID[0x1F] Zhao Liu
2023-11-17 7:50 ` [PATCH v6 09/16] i386: Support module_id in X86CPUTopoIDs Zhao Liu
2023-11-17 7:51 ` [PATCH v6 10/16] i386/cpu: Introduce cluster-id to X86CPU Zhao Liu
2023-11-17 7:51 ` [PATCH v6 11/16] tests: Add test case of APIC ID for module level parsing Zhao Liu
2023-11-17 7:51 ` [PATCH v6 12/16] hw/i386/pc: Support smp.clusters for x86 PC machine Zhao Liu
2023-11-17 7:51 ` [PATCH v6 13/16] i386: Add cache topology info in CPUCacheInfo Zhao Liu
2023-11-17 7:51 ` [PATCH v6 14/16] i386: Use CPUCacheInfo.share_level to encode CPUID[4] Zhao Liu
2023-11-17 7:51 ` [PATCH v6 15/16] i386: Use offsets get NumSharingCache for CPUID[0x8000001D].EAX[bits 25:14] Zhao Liu
2023-11-17 7:51 ` [PATCH v6 16/16] i386: Use CPUCacheInfo.share_level to encode " Zhao Liu
2023-12-05 3:28 ` [PATCH v6 00/16] Support smp.clusters for x86 in QEMU Zhao Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231117075106.432499-3-zhao1.liu@linux.intel.com \
--to=zhao1.liu@linux.intel.com \
--cc=babu.moger@amd.com \
--cc=eduardo@habkost.net \
--cc=kvm@vger.kernel.org \
--cc=marcel.apfelbaum@gmail.com \
--cc=mst@redhat.com \
--cc=mtosatti@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=robert.hu@linux.intel.com \
--cc=yongwei.ma@intel.com \
--cc=zhao1.liu@intel.com \
--cc=zhenyu.z.wang@intel.com \
--cc=zhuocheng.ding@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).