From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Richard Henderson <richard.henderson@linaro.org>
Subject: [PULL 13/46] target/i386: do not clobber A0 in POP translation
Date: Sun, 31 Dec 2023 09:44:29 +0100 [thread overview]
Message-ID: <20231231084502.235366-14-pbonzini@redhat.com> (raw)
In-Reply-To: <20231231084502.235366-1-pbonzini@redhat.com>
The new decoder likes to compute the address in A0 very early, so the
gen_lea_v_seg in gen_pop_T0 would clobber the address of the memory
operand. Instead use T0 since it is already available and will be
overwritten immediately after.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
target/i386/tcg/translate.c | 34 ++++++++++++++++++++--------------
1 file changed, 20 insertions(+), 14 deletions(-)
diff --git a/target/i386/tcg/translate.c b/target/i386/tcg/translate.c
index 73b83e07e23..efef4e74d4c 100644
--- a/target/i386/tcg/translate.c
+++ b/target/i386/tcg/translate.c
@@ -635,17 +635,17 @@ static TCGv eip_cur_tl(DisasContext *s)
}
}
-/* Compute SEG:REG into A0. SEG is selected from the override segment
+/* Compute SEG:REG into DEST. SEG is selected from the override segment
(OVR_SEG) and the default segment (DEF_SEG). OVR_SEG may be -1 to
indicate no override. */
-static void gen_lea_v_seg(DisasContext *s, MemOp aflag, TCGv a0,
- int def_seg, int ovr_seg)
+static void gen_lea_v_seg_dest(DisasContext *s, MemOp aflag, TCGv dest, TCGv a0,
+ int def_seg, int ovr_seg)
{
switch (aflag) {
#ifdef TARGET_X86_64
case MO_64:
if (ovr_seg < 0) {
- tcg_gen_mov_tl(s->A0, a0);
+ tcg_gen_mov_tl(dest, a0);
return;
}
break;
@@ -656,14 +656,14 @@ static void gen_lea_v_seg(DisasContext *s, MemOp aflag, TCGv a0,
ovr_seg = def_seg;
}
if (ovr_seg < 0) {
- tcg_gen_ext32u_tl(s->A0, a0);
+ tcg_gen_ext32u_tl(dest, a0);
return;
}
break;
case MO_16:
/* 16 bit address */
- tcg_gen_ext16u_tl(s->A0, a0);
- a0 = s->A0;
+ tcg_gen_ext16u_tl(dest, a0);
+ a0 = dest;
if (ovr_seg < 0) {
if (ADDSEG(s)) {
ovr_seg = def_seg;
@@ -680,17 +680,23 @@ static void gen_lea_v_seg(DisasContext *s, MemOp aflag, TCGv a0,
TCGv seg = cpu_seg_base[ovr_seg];
if (aflag == MO_64) {
- tcg_gen_add_tl(s->A0, a0, seg);
+ tcg_gen_add_tl(dest, a0, seg);
} else if (CODE64(s)) {
- tcg_gen_ext32u_tl(s->A0, a0);
- tcg_gen_add_tl(s->A0, s->A0, seg);
+ tcg_gen_ext32u_tl(dest, a0);
+ tcg_gen_add_tl(dest, dest, seg);
} else {
- tcg_gen_add_tl(s->A0, a0, seg);
- tcg_gen_ext32u_tl(s->A0, s->A0);
+ tcg_gen_add_tl(dest, a0, seg);
+ tcg_gen_ext32u_tl(dest, dest);
}
}
}
+static void gen_lea_v_seg(DisasContext *s, MemOp aflag, TCGv a0,
+ int def_seg, int ovr_seg)
+{
+ gen_lea_v_seg_dest(s, aflag, s->A0, a0, def_seg, ovr_seg);
+}
+
static inline void gen_string_movl_A0_ESI(DisasContext *s)
{
gen_lea_v_seg(s, s->aflag, cpu_regs[R_ESI], R_DS, s->override);
@@ -2576,8 +2582,8 @@ static MemOp gen_pop_T0(DisasContext *s)
{
MemOp d_ot = mo_pushpop(s, s->dflag);
- gen_lea_v_seg(s, mo_stacksize(s), cpu_regs[R_ESP], R_SS, -1);
- gen_op_ld_v(s, d_ot, s->T0, s->A0);
+ gen_lea_v_seg_dest(s, mo_stacksize(s), s->T0, cpu_regs[R_ESP], R_SS, -1);
+ gen_op_ld_v(s, d_ot, s->T0, s->T0);
return d_ot;
}
--
2.43.0
next prev parent reply other threads:[~2023-12-31 8:53 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-31 8:44 [PULL 00/46] (mostly) target/i386 and meson changes for 2023-12-31 Paolo Bonzini
2023-12-31 8:44 ` [PULL 01/46] configure: use a native non-cross compiler for linux-user Paolo Bonzini
2023-12-31 8:44 ` [PULL 02/46] target/i386: optimize computation of JL and JLE from flags Paolo Bonzini
2023-12-31 8:44 ` [PULL 03/46] target/i386: speedup JO/SETO after MUL or IMUL Paolo Bonzini
2023-12-31 8:44 ` [PULL 04/46] target/i386: remove unnecessary arguments from raise_interrupt Paolo Bonzini
2023-12-31 8:44 ` [PULL 05/46] target/i386: remove unnecessary truncations Paolo Bonzini
2023-12-31 8:44 ` [PULL 06/46] target/i386: clean up cpu_cc_compute_all Paolo Bonzini
2023-12-31 8:44 ` [PULL 07/46] target/i386: document more deviations from the manual Paolo Bonzini
2023-12-31 8:44 ` [PULL 08/46] target/i386: reimplement check for validity of LOCK prefix Paolo Bonzini
2023-12-31 8:44 ` [PULL 09/46] target/i386: avoid trunc and ext for MULX and RORX Paolo Bonzini
2023-12-31 8:44 ` [PULL 10/46] target/i386: rename zext0/zext2 and make them closer to the manual Paolo Bonzini
2023-12-31 8:44 ` [PULL 11/46] target/i386: add X86_SPECIALs for MOVSX and MOVZX Paolo Bonzini
2023-12-31 8:44 ` [PULL 12/46] target/i386: do not decode string source/destination into decode->mem Paolo Bonzini
2023-12-31 8:44 ` Paolo Bonzini [this message]
2023-12-31 8:44 ` [PULL 14/46] target/i386: do not clobber T0 on string operations Paolo Bonzini
2023-12-31 8:44 ` [PULL 15/46] target/i386: split eflags computation out of gen_compute_eflags Paolo Bonzini
2023-12-31 8:44 ` [PULL 16/46] target/i386: do not use s->tmp4 for push Paolo Bonzini
2023-12-31 8:44 ` [PULL 17/46] target/i386: do not use s->tmp0 for jumps on ECX ==/!= 0 Paolo Bonzini
2023-12-31 8:44 ` [PULL 18/46] target/i386: prepare for implementation of STOS/SCAS in new decoder Paolo Bonzini
2023-12-31 8:44 ` [PULL 19/46] target/i386: move operand load and writeback out of gen_cmovcc1 Paolo Bonzini
2023-12-31 8:44 ` [PULL 20/46] target/i386: adjust decoding of J operand Paolo Bonzini
2023-12-31 8:44 ` [PULL 21/46] target/i386: introduce flags writeback mechanism Paolo Bonzini
2023-12-31 8:44 ` [PULL 22/46] target/i386: implement CMPccXADD Paolo Bonzini
2023-12-31 8:44 ` [PULL 23/46] target/i386: the sgx_epc_get_section stub is reachable Paolo Bonzini
2023-12-31 8:44 ` [PULL 24/46] esp: check for NULL result from scsi_device_find() Paolo Bonzini
2023-12-31 8:44 ` [PULL 25/46] meson: fix type of "relocatable" option Paolo Bonzini
2023-12-31 8:44 ` [PULL 26/46] meson: remove unused variable Paolo Bonzini
2023-12-31 8:44 ` [PULL 27/46] meson: use version_compare() to compare version Paolo Bonzini
2023-12-31 8:44 ` [PULL 28/46] Makefile: clean qemu-iotests output Paolo Bonzini
2023-12-31 8:44 ` [PULL 29/46] configure: remove unnecessary subshell Paolo Bonzini
2023-12-31 8:44 ` [PULL 30/46] configure: unify again the case arms in probe_target_compiler Paolo Bonzini
2023-12-31 8:44 ` [PULL 31/46] meson: add more sections to main meson.build Paolo Bonzini
2023-12-31 8:44 ` [PULL 32/46] meson: move program checks together Paolo Bonzini
2023-12-31 8:44 ` [PULL 33/46] meson: move option validation together Paolo Bonzini
2023-12-31 8:44 ` [PULL 34/46] meson: move accelerator dependency checks together Paolo Bonzini
2023-12-31 8:44 ` [PULL 35/46] meson: keep subprojects together Paolo Bonzini
2023-12-31 8:44 ` [PULL 36/46] meson: move CFI detection code with other compiler flags Paolo Bonzini
2023-12-31 8:44 ` [PULL 37/46] meson: move config-host.h definitions together Paolo Bonzini
2023-12-31 8:44 ` [PULL 38/46] meson: move subdirs to "Collect sources" section Paolo Bonzini
2023-12-31 8:44 ` [PULL 39/46] meson: always probe u2f and canokey if the option is enabled Paolo Bonzini
2023-12-31 8:44 ` [PULL 40/46] meson: remove OS definitions from config_targetos Paolo Bonzini
2023-12-31 8:44 ` [PULL 41/46] meson: remove CONFIG_POSIX and CONFIG_WIN32 " Paolo Bonzini
2023-12-31 8:44 ` [PULL 42/46] meson: remove config_targetos Paolo Bonzini
2023-12-31 8:44 ` [PULL 43/46] meson: remove CONFIG_ALL Paolo Bonzini
2023-12-31 8:45 ` [PULL 44/46] meson: rename config_all Paolo Bonzini
2023-12-31 8:45 ` [PULL 45/46] configure, meson: rename targetos to host_os Paolo Bonzini
2023-12-31 8:45 ` [PULL 46/46] meson.build: report graphics backends separately Paolo Bonzini
2024-01-05 12:53 ` [PULL 00/46] (mostly) target/i386 and meson changes for 2023-12-31 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231231084502.235366-14-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).