qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Richard Henderson <richard.henderson@linaro.org>
Subject: [PULL 19/46] target/i386: move operand load and writeback out of gen_cmovcc1
Date: Sun, 31 Dec 2023 09:44:35 +0100	[thread overview]
Message-ID: <20231231084502.235366-20-pbonzini@redhat.com> (raw)
In-Reply-To: <20231231084502.235366-1-pbonzini@redhat.com>

Similar to gen_setcc1, make gen_cmovcc1 receive TCGv.  This is more friendly
to simultaneous implementation in the old and the new decoder.

A small wart is that s->T0 of CMOV is currently the *second* argument (which
would ordinarily be in T1).  Therefore, the condition has to be inverted in
order to overwrite s->T0 with cpu_regs[reg] if the MOV is not performed.

This only applies to the old decoder, and this code will go away soon.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 target/i386/tcg/translate.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/target/i386/tcg/translate.c b/target/i386/tcg/translate.c
index ecbd80a19ad..fe82d421576 100644
--- a/target/i386/tcg/translate.c
+++ b/target/i386/tcg/translate.c
@@ -2500,14 +2500,10 @@ static void gen_jcc(DisasContext *s, int b, int diff)
     gen_jmp_rel(s, s->dflag, diff, 0);
 }
 
-static void gen_cmovcc1(CPUX86State *env, DisasContext *s, MemOp ot, int b,
-                        int modrm, int reg)
+static void gen_cmovcc1(DisasContext *s, int b, TCGv dest, TCGv src)
 {
-    CCPrepare cc;
+    CCPrepare cc = gen_prepare_cc(s, b, s->T1);
 
-    gen_ldst_modrm(env, s, modrm, ot, OR_TMP0, 0);
-
-    cc = gen_prepare_cc(s, b, s->T1);
     if (cc.mask != -1) {
         TCGv t0 = tcg_temp_new();
         tcg_gen_andi_tl(t0, cc.reg, cc.mask);
@@ -2517,9 +2513,7 @@ static void gen_cmovcc1(CPUX86State *env, DisasContext *s, MemOp ot, int b,
         cc.reg2 = tcg_constant_tl(cc.imm);
     }
 
-    tcg_gen_movcond_tl(cc.cond, s->T0, cc.reg, cc.reg2,
-                       s->T0, cpu_regs[reg]);
-    gen_op_mov_reg_v(s, ot, reg, s->T0);
+    tcg_gen_movcond_tl(cc.cond, dest, cc.reg, cc.reg2, src, dest);
 }
 
 static inline void gen_op_movl_T0_seg(DisasContext *s, X86Seg seg_reg)
@@ -5228,7 +5222,9 @@ static bool disas_insn(DisasContext *s, CPUState *cpu)
         ot = dflag;
         modrm = x86_ldub_code(env, s);
         reg = ((modrm >> 3) & 7) | REX_R(s);
-        gen_cmovcc1(env, s, ot, b, modrm, reg);
+        gen_ldst_modrm(env, s, modrm, ot, OR_TMP0, 0);
+        gen_cmovcc1(s, b ^ 1, s->T0, cpu_regs[reg]);
+        gen_op_mov_reg_v(s, ot, reg, s->T0);
         break;
 
         /************************/
-- 
2.43.0



  parent reply	other threads:[~2023-12-31  8:54 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-31  8:44 [PULL 00/46] (mostly) target/i386 and meson changes for 2023-12-31 Paolo Bonzini
2023-12-31  8:44 ` [PULL 01/46] configure: use a native non-cross compiler for linux-user Paolo Bonzini
2023-12-31  8:44 ` [PULL 02/46] target/i386: optimize computation of JL and JLE from flags Paolo Bonzini
2023-12-31  8:44 ` [PULL 03/46] target/i386: speedup JO/SETO after MUL or IMUL Paolo Bonzini
2023-12-31  8:44 ` [PULL 04/46] target/i386: remove unnecessary arguments from raise_interrupt Paolo Bonzini
2023-12-31  8:44 ` [PULL 05/46] target/i386: remove unnecessary truncations Paolo Bonzini
2023-12-31  8:44 ` [PULL 06/46] target/i386: clean up cpu_cc_compute_all Paolo Bonzini
2023-12-31  8:44 ` [PULL 07/46] target/i386: document more deviations from the manual Paolo Bonzini
2023-12-31  8:44 ` [PULL 08/46] target/i386: reimplement check for validity of LOCK prefix Paolo Bonzini
2023-12-31  8:44 ` [PULL 09/46] target/i386: avoid trunc and ext for MULX and RORX Paolo Bonzini
2023-12-31  8:44 ` [PULL 10/46] target/i386: rename zext0/zext2 and make them closer to the manual Paolo Bonzini
2023-12-31  8:44 ` [PULL 11/46] target/i386: add X86_SPECIALs for MOVSX and MOVZX Paolo Bonzini
2023-12-31  8:44 ` [PULL 12/46] target/i386: do not decode string source/destination into decode->mem Paolo Bonzini
2023-12-31  8:44 ` [PULL 13/46] target/i386: do not clobber A0 in POP translation Paolo Bonzini
2023-12-31  8:44 ` [PULL 14/46] target/i386: do not clobber T0 on string operations Paolo Bonzini
2023-12-31  8:44 ` [PULL 15/46] target/i386: split eflags computation out of gen_compute_eflags Paolo Bonzini
2023-12-31  8:44 ` [PULL 16/46] target/i386: do not use s->tmp4 for push Paolo Bonzini
2023-12-31  8:44 ` [PULL 17/46] target/i386: do not use s->tmp0 for jumps on ECX ==/!= 0 Paolo Bonzini
2023-12-31  8:44 ` [PULL 18/46] target/i386: prepare for implementation of STOS/SCAS in new decoder Paolo Bonzini
2023-12-31  8:44 ` Paolo Bonzini [this message]
2023-12-31  8:44 ` [PULL 20/46] target/i386: adjust decoding of J operand Paolo Bonzini
2023-12-31  8:44 ` [PULL 21/46] target/i386: introduce flags writeback mechanism Paolo Bonzini
2023-12-31  8:44 ` [PULL 22/46] target/i386: implement CMPccXADD Paolo Bonzini
2023-12-31  8:44 ` [PULL 23/46] target/i386: the sgx_epc_get_section stub is reachable Paolo Bonzini
2023-12-31  8:44 ` [PULL 24/46] esp: check for NULL result from scsi_device_find() Paolo Bonzini
2023-12-31  8:44 ` [PULL 25/46] meson: fix type of "relocatable" option Paolo Bonzini
2023-12-31  8:44 ` [PULL 26/46] meson: remove unused variable Paolo Bonzini
2023-12-31  8:44 ` [PULL 27/46] meson: use version_compare() to compare version Paolo Bonzini
2023-12-31  8:44 ` [PULL 28/46] Makefile: clean qemu-iotests output Paolo Bonzini
2023-12-31  8:44 ` [PULL 29/46] configure: remove unnecessary subshell Paolo Bonzini
2023-12-31  8:44 ` [PULL 30/46] configure: unify again the case arms in probe_target_compiler Paolo Bonzini
2023-12-31  8:44 ` [PULL 31/46] meson: add more sections to main meson.build Paolo Bonzini
2023-12-31  8:44 ` [PULL 32/46] meson: move program checks together Paolo Bonzini
2023-12-31  8:44 ` [PULL 33/46] meson: move option validation together Paolo Bonzini
2023-12-31  8:44 ` [PULL 34/46] meson: move accelerator dependency checks together Paolo Bonzini
2023-12-31  8:44 ` [PULL 35/46] meson: keep subprojects together Paolo Bonzini
2023-12-31  8:44 ` [PULL 36/46] meson: move CFI detection code with other compiler flags Paolo Bonzini
2023-12-31  8:44 ` [PULL 37/46] meson: move config-host.h definitions together Paolo Bonzini
2023-12-31  8:44 ` [PULL 38/46] meson: move subdirs to "Collect sources" section Paolo Bonzini
2023-12-31  8:44 ` [PULL 39/46] meson: always probe u2f and canokey if the option is enabled Paolo Bonzini
2023-12-31  8:44 ` [PULL 40/46] meson: remove OS definitions from config_targetos Paolo Bonzini
2023-12-31  8:44 ` [PULL 41/46] meson: remove CONFIG_POSIX and CONFIG_WIN32 " Paolo Bonzini
2023-12-31  8:44 ` [PULL 42/46] meson: remove config_targetos Paolo Bonzini
2023-12-31  8:44 ` [PULL 43/46] meson: remove CONFIG_ALL Paolo Bonzini
2023-12-31  8:45 ` [PULL 44/46] meson: rename config_all Paolo Bonzini
2023-12-31  8:45 ` [PULL 45/46] configure, meson: rename targetos to host_os Paolo Bonzini
2023-12-31  8:45 ` [PULL 46/46] meson.build: report graphics backends separately Paolo Bonzini
2024-01-05 12:53 ` [PULL 00/46] (mostly) target/i386 and meson changes for 2023-12-31 Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231231084502.235366-20-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).