From: Brian Cain <bcain@quicinc.com>
To: <qemu-devel@nongnu.org>
Cc: <bcain@quicinc.com>, <armbru@redhat.com>,
<richard.henderson@linaro.org>, <philmd@linaro.org>,
<peter.maydell@linaro.org>, <quic_mathbern@quicinc.com>,
<stefanha@redhat.com>, <ale@rev.ng>, <anjo@rev.ng>,
<quic_mliebel@quicinc.com>, <ltaylorsimpson@gmail.com>
Subject: [PULL 03/15] Hexagon (target/hexagon) Clean up handling of modifier registers
Date: Sun, 21 Jan 2024 22:34:49 -0800 [thread overview]
Message-ID: <20240122063501.782041-4-bcain@quicinc.com> (raw)
In-Reply-To: <20240122063501.782041-1-bcain@quicinc.com>
From: Taylor Simpson <ltaylorsimpson@gmail.com>
Currently, the register number (MuN) for modifier registers is the
modifier register number rather than the index into hex_gpr. This
patch changes MuN to the hex_gpr index, which is consistent with
the handling of control registers.
Note that HELPER(fcircadd) needs the CS register corresponding to the
modifier register specified in the instruction. We create a TCGv
variable "CS" to hold the value to pass to the helper.
Reviewed-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Message-Id: <20231210220712.491494-2-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
---
target/hexagon/gen_tcg.h | 9 ++++-----
target/hexagon/gen_tcg_funcs.py | 13 +++++++++----
target/hexagon/idef-parser/parser-helpers.c | 8 +++-----
target/hexagon/macros.h | 3 +--
4 files changed, 17 insertions(+), 16 deletions(-)
diff --git a/target/hexagon/gen_tcg.h b/target/hexagon/gen_tcg.h
index d992059fce..1c4391b415 100644
--- a/target/hexagon/gen_tcg.h
+++ b/target/hexagon/gen_tcg.h
@@ -68,15 +68,14 @@
do { \
TCGv tcgv_siV = tcg_constant_tl(siV); \
tcg_gen_mov_tl(EA, RxV); \
- gen_helper_fcircadd(RxV, RxV, tcgv_siV, MuV, \
- hex_gpr[HEX_REG_CS0 + MuN]); \
+ gen_helper_fcircadd(RxV, RxV, tcgv_siV, MuV, CS); \
} while (0)
#define GET_EA_pcr(SHIFT) \
do { \
TCGv ireg = tcg_temp_new(); \
tcg_gen_mov_tl(EA, RxV); \
gen_read_ireg(ireg, MuV, (SHIFT)); \
- gen_helper_fcircadd(RxV, RxV, ireg, MuV, hex_gpr[HEX_REG_CS0 + MuN]); \
+ gen_helper_fcircadd(RxV, RxV, ireg, MuV, CS); \
} while (0)
/* Instructions with multiple definitions */
@@ -113,7 +112,7 @@
TCGv ireg = tcg_temp_new(); \
tcg_gen_mov_tl(EA, RxV); \
gen_read_ireg(ireg, MuV, SHIFT); \
- gen_helper_fcircadd(RxV, RxV, ireg, MuV, hex_gpr[HEX_REG_CS0 + MuN]); \
+ gen_helper_fcircadd(RxV, RxV, ireg, MuV, CS); \
LOAD; \
} while (0)
@@ -427,7 +426,7 @@
TCGv BYTE G_GNUC_UNUSED = tcg_temp_new(); \
tcg_gen_mov_tl(EA, RxV); \
gen_read_ireg(ireg, MuV, SHIFT); \
- gen_helper_fcircadd(RxV, RxV, ireg, MuV, hex_gpr[HEX_REG_CS0 + MuN]); \
+ gen_helper_fcircadd(RxV, RxV, ireg, MuV, CS); \
STORE; \
} while (0)
diff --git a/target/hexagon/gen_tcg_funcs.py b/target/hexagon/gen_tcg_funcs.py
index f5246cee6d..02d93bc5ce 100755
--- a/target/hexagon/gen_tcg_funcs.py
+++ b/target/hexagon/gen_tcg_funcs.py
@@ -99,10 +99,15 @@ def genptr_decl(f, tag, regtype, regid, regno):
hex_common.bad_register(regtype, regid)
elif regtype == "M":
if regid == "u":
- f.write(f" const int {regtype}{regid}N = " f"insn->regno[{regno}];\n")
f.write(
- f" TCGv {regtype}{regid}V = hex_gpr[{regtype}{regid}N + "
- "HEX_REG_M0];\n"
+ f" const int {regN} = insn->regno[{regno}] + HEX_REG_M0;\n"
+ )
+ f.write(
+ f" TCGv {regtype}{regid}V = hex_gpr[{regN}];\n"
+ )
+ f.write(
+ f" TCGv CS G_GNUC_UNUSED = "
+ f"hex_gpr[{regN} - HEX_REG_M0 + HEX_REG_CS0];\n"
)
else:
hex_common.bad_register(regtype, regid)
@@ -528,7 +533,7 @@ def gen_tcg_func(f, tag, regs, imms):
):
declared.append(f"{regtype}{regid}V")
if regtype == "M":
- declared.append(f"{regtype}{regid}N")
+ declared.append("CS")
elif hex_common.is_new_val(regtype, regid, tag):
declared.append(f"{regtype}{regid}N")
else:
diff --git a/target/hexagon/idef-parser/parser-helpers.c b/target/hexagon/idef-parser/parser-helpers.c
index 4af020933a..95f2b43076 100644
--- a/target/hexagon/idef-parser/parser-helpers.c
+++ b/target/hexagon/idef-parser/parser-helpers.c
@@ -1541,10 +1541,8 @@ void gen_circ_op(Context *c,
HexValue *increment,
HexValue *modifier)
{
- HexValue cs = gen_tmp(c, locp, 32, UNSIGNED);
HexValue increment_m = *increment;
increment_m = rvalue_materialize(c, locp, &increment_m);
- OUT(c, locp, "gen_read_reg(", &cs, ", HEX_REG_CS0 + MuN);\n");
OUT(c,
locp,
"gen_helper_fcircadd(",
@@ -1555,7 +1553,7 @@ void gen_circ_op(Context *c,
&increment_m,
", ",
modifier);
- OUT(c, locp, ", ", &cs, ");\n");
+ OUT(c, locp, ", CS);\n");
}
HexValue gen_locnt_op(Context *c, YYLTYPE *locp, HexValue *src)
@@ -2080,9 +2078,9 @@ void emit_arg(Context *c, YYLTYPE *locp, HexValue *arg)
char reg_id[5];
reg_compose(c, locp, &(arg->reg), reg_id);
EMIT_SIG(c, ", %s %s", type, reg_id);
- /* MuV register requires also MuN to provide its index */
+ /* MuV register requires also CS for circular addressing*/
if (arg->reg.type == MODIFIER) {
- EMIT_SIG(c, ", int MuN");
+ EMIT_SIG(c, ", TCGv CS");
}
}
break;
diff --git a/target/hexagon/macros.h b/target/hexagon/macros.h
index f99390e2a8..1376d6ccc1 100644
--- a/target/hexagon/macros.h
+++ b/target/hexagon/macros.h
@@ -462,8 +462,7 @@ static inline TCGv gen_read_ireg(TCGv result, TCGv val, int shift)
#define fPM_CIRI(REG, IMM, MVAL) \
do { \
TCGv tcgv_siV = tcg_constant_tl(siV); \
- gen_helper_fcircadd(REG, REG, tcgv_siV, MuV, \
- hex_gpr[HEX_REG_CS0 + MuN]); \
+ gen_helper_fcircadd(REG, REG, tcgv_siV, MuV, CS); \
} while (0)
#else
#define fEA_IMM(IMM) do { EA = (IMM); } while (0)
--
2.25.1
next prev parent reply other threads:[~2024-01-22 6:36 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-22 6:34 [PULL 00/15] target-hexagon queue, hexagon docker Brian Cain
2024-01-22 6:34 ` [PULL 01/15] tests/docker: Hexagon toolchain update Brian Cain
2024-01-22 6:34 ` [PULL 02/15] Hexagon (target/hexagon) Fix shadow variable when idef-parser is off Brian Cain
2024-01-22 6:34 ` Brian Cain [this message]
2024-01-22 6:34 ` [PULL 04/15] Hexagon (target/hexagon) Make generators object oriented - gen_tcg_funcs Brian Cain
2024-01-22 6:34 ` [PULL 05/15] Hexagon (target/hexagon) Make generators object oriented - gen_helper_protos Brian Cain
2024-01-22 6:34 ` [PULL 06/15] Hexagon (target/hexagon) Make generators object oriented - gen_helper_funcs Brian Cain
2024-01-22 6:34 ` [PULL 07/15] Hexagon (target/hexagon) Make generators object oriented - gen_idef_parser_funcs Brian Cain
2024-01-22 6:34 ` [PULL 08/15] Hexagon (target/hexagon) Make generators object oriented - gen_op_regs Brian Cain
2024-01-22 6:34 ` [PULL 09/15] Hexagon (target/hexagon) Make generators object oriented - gen_analyze_funcs Brian Cain
2024-01-22 6:34 ` [PULL 10/15] Hexagon (target/hexagon) Remove unused WRITES_PRED_REG attribute Brian Cain
2024-01-22 6:34 ` [PULL 11/15] Hexagon (target/hexagon) Remove dead functions from hex_common.py Brian Cain
2024-01-22 6:34 ` [PULL 12/15] Hexagon (target/hexagon) Use QEMU decodetree (32-bit instructions) Brian Cain
2024-01-22 6:34 ` [PULL 13/15] Hexagon (target/hexagon) Use QEMU decodetree (16-bit instructions) Brian Cain
2024-01-22 6:35 ` [PULL 14/15] Hexagon (target/hexagon) Remove old dectree.py Brian Cain
2024-01-22 6:35 ` [PULL 15/15] target/hexagon: reduce scope of def_regnum, remove dead assignment Brian Cain
2024-01-23 16:37 ` [PULL 00/15] target-hexagon queue, hexagon docker Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240122063501.782041-4-bcain@quicinc.com \
--to=bcain@quicinc.com \
--cc=ale@rev.ng \
--cc=anjo@rev.ng \
--cc=armbru@redhat.com \
--cc=ltaylorsimpson@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=quic_mathbern@quicinc.com \
--cc=quic_mliebel@quicinc.com \
--cc=richard.henderson@linaro.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).