From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Richard Henderson" <richard.henderson@linaro.org>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Ilya Leoshkevich" <iii@linux.ibm.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Laurent Vivier" <laurent@vivier.eu>
Subject: [PATCH v5 4/4] accel/tcg: Move perf and debuginfo support to tcg
Date: Wed, 24 Jan 2024 08:56:09 +0100 [thread overview]
Message-ID: <20240124075609.14756-5-philmd@linaro.org> (raw)
In-Reply-To: <20240124075609.14756-1-philmd@linaro.org>
From: Ilya Leoshkevich <iii@linux.ibm.com>
tcg/ should not depend on accel/tcg/, but perf and debuginfo
support provided by the latter are being used by tcg/tcg.c.
Since that's the only user, move both to tcg/.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20231208003754.3688038-5-iii@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
{accel/tcg => tcg}/debuginfo.h | 4 ++--
{accel/tcg => tcg}/perf.h | 4 ++--
accel/tcg/translate-all.c | 2 +-
hw/core/loader.c | 2 +-
linux-user/elfload.c | 2 +-
linux-user/exit.c | 2 +-
linux-user/main.c | 2 +-
system/vl.c | 2 +-
{accel/tcg => tcg}/debuginfo.c | 0
{accel/tcg => tcg}/perf.c | 2 +-
tcg/tcg.c | 2 +-
accel/tcg/meson.build | 4 ----
tcg/meson.build | 5 +++++
13 files changed, 17 insertions(+), 16 deletions(-)
rename {accel/tcg => tcg}/debuginfo.h (96%)
rename {accel/tcg => tcg}/perf.h (95%)
rename {accel/tcg => tcg}/debuginfo.c (100%)
rename {accel/tcg => tcg}/perf.c (99%)
diff --git a/accel/tcg/debuginfo.h b/tcg/debuginfo.h
similarity index 96%
rename from accel/tcg/debuginfo.h
rename to tcg/debuginfo.h
index f064e1c144..858535b5da 100644
--- a/accel/tcg/debuginfo.h
+++ b/tcg/debuginfo.h
@@ -4,8 +4,8 @@
* SPDX-License-Identifier: GPL-2.0-or-later
*/
-#ifndef ACCEL_TCG_DEBUGINFO_H
-#define ACCEL_TCG_DEBUGINFO_H
+#ifndef TCG_DEBUGINFO_H
+#define TCG_DEBUGINFO_H
#include "qemu/bitops.h"
diff --git a/accel/tcg/perf.h b/tcg/perf.h
similarity index 95%
rename from accel/tcg/perf.h
rename to tcg/perf.h
index f92dd52c69..c96b5920a3 100644
--- a/accel/tcg/perf.h
+++ b/tcg/perf.h
@@ -4,8 +4,8 @@
* SPDX-License-Identifier: GPL-2.0-or-later
*/
-#ifndef ACCEL_TCG_PERF_H
-#define ACCEL_TCG_PERF_H
+#ifndef TCG_PERF_H
+#define TCG_PERF_H
#if defined(CONFIG_TCG) && defined(CONFIG_LINUX)
/* Start writing perf-<pid>.map. */
diff --git a/accel/tcg/translate-all.c b/accel/tcg/translate-all.c
index 1737bb3da5..1c695efe02 100644
--- a/accel/tcg/translate-all.c
+++ b/accel/tcg/translate-all.c
@@ -63,7 +63,7 @@
#include "tb-context.h"
#include "internal-common.h"
#include "internal-target.h"
-#include "perf.h"
+#include "tcg/perf.h"
#include "tcg/insn-start-words.h"
TBContext tb_ctx;
diff --git a/hw/core/loader.c b/hw/core/loader.c
index e7a9b3775b..b8e52f3fb0 100644
--- a/hw/core/loader.c
+++ b/hw/core/loader.c
@@ -62,7 +62,7 @@
#include "hw/boards.h"
#include "qemu/cutils.h"
#include "sysemu/runstate.h"
-#include "accel/tcg/debuginfo.h"
+#include "tcg/debuginfo.h"
#include <zlib.h>
diff --git a/linux-user/elfload.c b/linux-user/elfload.c
index cf9e74468b..62120c7615 100644
--- a/linux-user/elfload.c
+++ b/linux-user/elfload.c
@@ -21,7 +21,7 @@
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "target_signal.h"
-#include "accel/tcg/debuginfo.h"
+#include "tcg/debuginfo.h"
#ifdef TARGET_ARM
#include "target/arm/cpu-features.h"
diff --git a/linux-user/exit.c b/linux-user/exit.c
index 50266314e0..1ff8fe4f07 100644
--- a/linux-user/exit.c
+++ b/linux-user/exit.c
@@ -17,7 +17,7 @@
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
-#include "accel/tcg/perf.h"
+#include "tcg/perf.h"
#include "gdbstub/syscalls.h"
#include "qemu.h"
#include "user-internals.h"
diff --git a/linux-user/main.c b/linux-user/main.c
index c9470eeccf..74b2fbb393 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -54,7 +54,7 @@
#include "signal-common.h"
#include "loader.h"
#include "user-mmap.h"
-#include "accel/tcg/perf.h"
+#include "tcg/perf.h"
#ifdef CONFIG_SEMIHOSTING
#include "semihosting/semihost.h"
diff --git a/system/vl.c b/system/vl.c
index 788d88ea03..60fd1e56b6 100644
--- a/system/vl.c
+++ b/system/vl.c
@@ -96,7 +96,7 @@
#endif
#include "sysemu/qtest.h"
#ifdef CONFIG_TCG
-#include "accel/tcg/perf.h"
+#include "tcg/perf.h"
#endif
#include "disas/disas.h"
diff --git a/accel/tcg/debuginfo.c b/tcg/debuginfo.c
similarity index 100%
rename from accel/tcg/debuginfo.c
rename to tcg/debuginfo.c
diff --git a/accel/tcg/perf.c b/tcg/perf.c
similarity index 99%
rename from accel/tcg/perf.c
rename to tcg/perf.c
index 68a46b1b52..de34248d92 100644
--- a/accel/tcg/perf.c
+++ b/tcg/perf.c
@@ -11,7 +11,7 @@
#include "qemu/osdep.h"
#include "elf.h"
#include "exec/target_page.h"
-#include "exec/exec-all.h"
+#include "exec/translation-block.h"
#include "qemu/timer.h"
#include "tcg/tcg.h"
diff --git a/tcg/tcg.c b/tcg/tcg.c
index e2c38f6d11..eeff4c1d51 100644
--- a/tcg/tcg.c
+++ b/tcg/tcg.c
@@ -55,7 +55,7 @@
#include "tcg/tcg-ldst.h"
#include "tcg/tcg-temp-internal.h"
#include "tcg-internal.h"
-#include "accel/tcg/perf.h"
+#include "tcg/perf.h"
#ifdef CONFIG_USER_ONLY
#include "exec/user/guest-base.h"
#endif
diff --git a/accel/tcg/meson.build b/accel/tcg/meson.build
index c15ac9ac8f..46f7d53eeb 100644
--- a/accel/tcg/meson.build
+++ b/accel/tcg/meson.build
@@ -16,10 +16,6 @@ tcg_ss.add(when: 'CONFIG_SYSTEM_ONLY', if_false: files('user-exec-stub.c'))
if get_option('plugins')
tcg_ss.add(files('plugin-gen.c'))
endif
-tcg_ss.add(when: libdw, if_true: files('debuginfo.c'))
-if host_os == 'linux'
- tcg_ss.add(files('perf.c'))
-endif
specific_ss.add_all(when: 'CONFIG_TCG', if_true: tcg_ss)
specific_ss.add(when: ['CONFIG_SYSTEM_ONLY', 'CONFIG_TCG'], if_true: files(
diff --git a/tcg/meson.build b/tcg/meson.build
index 5afdec1e1a..8251589fd4 100644
--- a/tcg/meson.build
+++ b/tcg/meson.build
@@ -22,6 +22,11 @@ if get_option('tcg_interpreter')
tcg_ss.add(files('tci.c'))
endif
+tcg_ss.add(when: libdw, if_true: files('debuginfo.c'))
+if host_os == 'linux'
+ tcg_ss.add(files('perf.c'))
+endif
+
tcg_ss = tcg_ss.apply({})
libtcg_user = static_library('tcg_user',
--
2.41.0
next prev parent reply other threads:[~2024-01-24 7:57 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-24 7:56 [PATCH v5 0/4] accel/tcg: Move perf and debuginfo support to tcg Philippe Mathieu-Daudé
2024-01-24 7:56 ` [PATCH v5 1/4] target: Make qemu_target_page_mask() available for *-user Philippe Mathieu-Daudé
2024-01-24 21:06 ` Richard Henderson
2024-01-24 7:56 ` [PATCH v5 2/4] tcg: Make tb_cflags() usable from target-agnostic code Philippe Mathieu-Daudé
2024-01-24 21:07 ` Richard Henderson
2024-01-24 7:56 ` [PATCH v5 3/4] accel/tcg: Remove #ifdef TARGET_I386 from perf.c Philippe Mathieu-Daudé
2024-01-24 21:07 ` Richard Henderson
2024-01-24 7:56 ` Philippe Mathieu-Daudé [this message]
2024-01-24 21:11 ` [PATCH v5 4/4] accel/tcg: Move perf and debuginfo support to tcg Richard Henderson
2024-01-25 3:04 ` Ilya Leoshkevich
2024-01-25 4:53 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240124075609.14756-5-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=iii@linux.ibm.com \
--cc=laurent@vivier.eu \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).