From: "Inès Varhol" <ines.varhol@telecom-paris.fr>
To: qemu-devel@nongnu.org
Cc: "Arnaud Minier" <arnaud.minier@telecom-paris.fr>,
"Paolo Bonzini" <pbonzini@redhat.com>,
qemu-arm@nongnu.org, "Samuel Tardieu" <sam@rfc1149.net>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Alistair Francis" <alistair@alistair23.me>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Thomas Huth" <thuth@redhat.com>,
"Laurent Vivier" <lvivier@redhat.com>,
"Inès Varhol" <ines.varhol@telecom-paris.fr>
Subject: [PATCH 3/3] tests/qtest : Add testcase for DM163
Date: Fri, 26 Jan 2024 20:31:03 +0100 [thread overview]
Message-ID: <20240126193657.792005-4-ines.varhol@telecom-paris.fr> (raw)
In-Reply-To: <20240126193657.792005-1-ines.varhol@telecom-paris.fr>
`test_dm163_bank()`
Checks that the pin "sout" of the DM163 led driver outputs the values
received on pin "sin" with the expected latency (depending on the bank).
`test_dm163_gpio_connection()`
Check that changes to relevant STM32L4x5 GPIO pins are prpagated to the
DM163 device.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
---
tests/qtest/dm163-test.c | 192 +++++++++++++++++++++++++++++++++++++++
tests/qtest/meson.build | 1 +
2 files changed, 193 insertions(+)
create mode 100644 tests/qtest/dm163-test.c
diff --git a/tests/qtest/dm163-test.c b/tests/qtest/dm163-test.c
new file mode 100644
index 0000000000..7691ce1af0
--- /dev/null
+++ b/tests/qtest/dm163-test.c
@@ -0,0 +1,192 @@
+/*
+ * QTest testcase for DM163
+ *
+ * Copyright (C) 2024 Samuel Tardieu <sam@rfc1149.net>
+ * Copyright (C) 2024 Arnaud Minier <arnaud.minier@telecom-paris.fr>
+ * Copyright (C) 2024 Inès Varhol <ines.varhol@telecom-paris.fr>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "libqtest.h"
+
+#define SIN 8
+#define DCK 9
+#define RST_B 10
+#define LAT_B 11
+#define SELBK 12
+#define EN_B 13
+
+#define DEVICE_NAME "/machine/soc/dm163"
+#define GPIO_OUT(name, value) qtest_set_irq_in(qts, DEVICE_NAME, NULL, name, \
+ value)
+#define GPIO_PULSE(name) \
+ do { \
+ GPIO_OUT(name, 1); \
+ GPIO_OUT(name, 0); \
+ } while (0)
+
+
+static void rise_gpio_pin_dck(QTestState *qts)
+{
+ /* Configure output mode for pin PB1 */
+ qtest_writel(qts, 0x48000400, 0xFFFFFEB7);
+ /* Write 1 in ODR for PB1 */
+ qtest_writel(qts, 0x48000414, 0x00000002);
+}
+
+static void lower_gpio_pin_dck(QTestState *qts)
+{
+ /* Configure output mode for pin PB1 */
+ qtest_writel(qts, 0x48000400, 0xFFFFFEB7);
+ /* Write 0 in ODR for PB1 */
+ qtest_writel(qts, 0x48000414, 0x00000000);
+}
+
+static void rise_gpio_pin_selbk(QTestState *qts)
+{
+ /* Configure output mode for pin PC5 */
+ qtest_writel(qts, 0x48000800, 0xFFFFF7FF);
+ /* Write 1 in ODR for PC5 */
+ qtest_writel(qts, 0x48000814, 0x00000020);
+}
+
+static void lower_gpio_pin_selbk(QTestState *qts)
+{
+ /* Configure output mode for pin PC5 */
+ qtest_writel(qts, 0x48000800, 0xFFFFF7FF);
+ /* Write 0 in ODR for PC5 */
+ qtest_writel(qts, 0x48000814, 0x00000000);
+}
+
+static void rise_gpio_pin_lat_b(QTestState *qts)
+{
+ /* Configure output mode for pin PC4 */
+ qtest_writel(qts, 0x48000800, 0xFFFFFDFF);
+ /* Write 1 in ODR for PC4 */
+ qtest_writel(qts, 0x48000814, 0x00000010);
+}
+
+static void lower_gpio_pin_lat_b(QTestState *qts)
+{
+ /* Configure output mode for pin PC4 */
+ qtest_writel(qts, 0x48000800, 0xFFFFFDFF);
+ /* Write 0 in ODR for PC4 */
+ qtest_writel(qts, 0x48000814, 0x00000000);
+}
+
+static void rise_gpio_pin_rst_b(QTestState *qts)
+{
+ /* Configure output mode for pin PC3 */
+ qtest_writel(qts, 0x48000800, 0xFFFFFF7F);
+ /* Write 1 in ODR for PC3 */
+ qtest_writel(qts, 0x48000814, 0x00000008);
+}
+
+static void lower_gpio_pin_rst_b(QTestState *qts)
+{
+ /* Configure output mode for pin PC3 */
+ qtest_writel(qts, 0x48000800, 0xFFFFFF7F);
+ /* Write 0 in ODR for PC3 */
+ qtest_writel(qts, 0x48000814, 0x00000000);
+}
+
+static void rise_gpio_pin_sin(QTestState *qts)
+{
+ /* Configure output mode for pin PA4 */
+ qtest_writel(qts, 0x48000000, 0xFFFFFDFF);
+ /* Write 1 in ODR for PA4 */
+ qtest_writel(qts, 0x48000014, 0x00000010);
+}
+
+static void lower_gpio_pin_sin(QTestState *qts)
+{
+ /* Configure output mode for pin PA4 */
+ qtest_writel(qts, 0x48000000, 0xFFFFFDFF);
+ /* Write 0 in ODR for PA4 */
+ qtest_writel(qts, 0x48000014, 0x00000000);
+}
+
+static void test_dm163_bank(const void *opaque)
+{
+ const long bank = (uintptr_t) opaque;
+ const int width = bank ? 192 : 144;
+
+ QTestState *qts = qtest_initf("-M b-l475e-iot01a");
+ qtest_irq_intercept_out_named(qts, DEVICE_NAME, "sout");
+ GPIO_OUT(RST_B, 1);
+ GPIO_OUT(EN_B, 0);
+ GPIO_OUT(DCK, 0);
+ GPIO_OUT(SELBK, bank);
+ GPIO_OUT(LAT_B, 1);
+
+ /* Fill bank with zeroes */
+ GPIO_OUT(SIN, 0);
+ for (int i = 0; i < width; i++) {
+ GPIO_PULSE(DCK);
+ }
+ /* Fill bank with ones, check that we get the previous zeroes */
+ GPIO_OUT(SIN, 1);
+ for (int i = 0; i < width; i++) {
+ GPIO_PULSE(DCK);
+ g_assert(!qtest_get_irq(qts, 0));
+ }
+
+ /* Pulse one more bit in the bank, check that we get a one */
+ GPIO_PULSE(DCK);
+ g_assert(qtest_get_irq(qts, 0));
+
+ qtest_quit(qts);
+}
+
+static void test_dm163_gpio_connection(void)
+{
+ QTestState *qts = qtest_init("-M b-l475e-iot01a");
+ qtest_irq_intercept_in(qts, "/machine/soc/dm163");
+
+ g_assert_false(qtest_get_irq(qts, SIN));
+ g_assert_false(qtest_get_irq(qts, DCK));
+ g_assert_false(qtest_get_irq(qts, RST_B));
+ g_assert_false(qtest_get_irq(qts, LAT_B));
+ g_assert_false(qtest_get_irq(qts, SELBK));
+
+ rise_gpio_pin_dck(qts);
+ g_assert_true(qtest_get_irq(qts, DCK));
+ lower_gpio_pin_dck(qts);
+ g_assert_false(qtest_get_irq(qts, DCK));
+
+ rise_gpio_pin_lat_b(qts);
+ g_assert_true(qtest_get_irq(qts, LAT_B));
+ lower_gpio_pin_lat_b(qts);
+ g_assert_false(qtest_get_irq(qts, LAT_B));
+
+ rise_gpio_pin_selbk(qts);
+ g_assert_true(qtest_get_irq(qts, SELBK));
+ lower_gpio_pin_selbk(qts);
+ g_assert_false(qtest_get_irq(qts, SELBK));
+
+ rise_gpio_pin_rst_b(qts);
+ g_assert_true(qtest_get_irq(qts, RST_B));
+ lower_gpio_pin_rst_b(qts);
+ g_assert_false(qtest_get_irq(qts, RST_B));
+
+ rise_gpio_pin_sin(qts);
+ g_assert_true(qtest_get_irq(qts, SIN));
+ lower_gpio_pin_sin(qts);
+ g_assert_false(qtest_get_irq(qts, SIN));
+
+ g_assert_false(qtest_get_irq(qts, DCK));
+ g_assert_false(qtest_get_irq(qts, LAT_B));
+ g_assert_false(qtest_get_irq(qts, SELBK));
+ g_assert_false(qtest_get_irq(qts, RST_B));
+}
+
+int main(int argc, char **argv)
+{
+ g_test_init(&argc, &argv, NULL);
+ qtest_add_data_func("/dm163/bank0", (void *)0, test_dm163_bank);
+ qtest_add_data_func("/dm163/bank1", (void *)1, test_dm163_bank);
+ qtest_add_func("/dm163/gpio_connection", test_dm163_gpio_connection);
+ return g_test_run();
+}
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 5692da4fc1..e9f6ac46ef 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -22,6 +22,7 @@ qtests_generic = [
'qos-test',
'readconfig-test',
'netdev-socket',
+ 'dm163-test',
]
if enable_modules
qtests_generic += [ 'modules-test' ]
--
2.43.0
next prev parent reply other threads:[~2024-01-26 19:38 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-26 19:31 [PATCH 0/3] Add device DM163 (led driver, matrix colors shield & display) Inès Varhol
2024-01-26 19:31 ` [PATCH 1/3] hw/display : Add device DM163 Inès Varhol
2024-02-05 0:09 ` Alistair Francis
2024-01-26 19:31 ` [PATCH 2/3] hw/arm : Connect DM163 to STM32L4x5 Inès Varhol
2024-02-05 0:14 ` Alistair Francis
2024-02-05 13:46 ` Philippe Mathieu-Daudé
2024-02-07 17:25 ` Inès Varhol
2024-01-26 19:31 ` Inès Varhol [this message]
2024-02-05 13:52 ` [PATCH 3/3] tests/qtest : Add testcase for DM163 Philippe Mathieu-Daudé
2024-02-05 14:03 ` [PATCH 0/3] Add device DM163 (led driver, matrix colors shield & display) Philippe Mathieu-Daudé
2024-02-07 19:27 ` Inès Varhol
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240126193657.792005-4-ines.varhol@telecom-paris.fr \
--to=ines.varhol@telecom-paris.fr \
--cc=alistair@alistair23.me \
--cc=arnaud.minier@telecom-paris.fr \
--cc=lvivier@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=sam@rfc1149.net \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).