[PATCH v4 2/2] hw/arm: Connect SPI Controller to BCM2835

[Rayhan Faizel <rayhan.faizel@gmail.com>]

This patch will allow the SPI controller to be accessible from BCM2835 based
boards as SPI0. SPI driver is usually disabled by default and config.txt does
not work.

Instead, dtmerge can be used to apply spi=on on a bcm2835 dtb file.

Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
---
 hw/arm/Kconfig                       |  1 +
 hw/arm/bcm2835_peripherals.c         | 16 +++++++++++++++-
 include/hw/arm/bcm2835_peripherals.h |  3 ++-
 3 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 218b454e97..c8e0f2d78c 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -425,6 +425,7 @@ config RASPI
     select PL011 # UART
     select SDHCI
     select USB_DWC2
+    select BCM2835_SPI
 
 config STM32F100_SOC
     bool
diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c
index 0233038b95..6b94bffb9b 100644
--- a/hw/arm/bcm2835_peripherals.c
+++ b/hw/arm/bcm2835_peripherals.c
@@ -144,6 +144,10 @@ static void bcm2835_peripherals_init(Object *obj)
     /* Power Management */
     object_initialize_child(obj, "powermgt", &s->powermgt,
                             TYPE_BCM2835_POWERMGT);
+
+    /* SPI */
+    object_initialize_child(obj, "bcm2835-spi0", &s->spi[0],
+                            TYPE_BCM2835_SPI);
 }
 
 static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
@@ -402,11 +406,21 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
     memory_region_add_subregion(&s->peri_mr, PM_OFFSET,
                 sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->powermgt), 0));
 
+    /* SPI */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[0]), errp)) {
+        return;
+    }
+
+    memory_region_add_subregion(&s->peri_mr, SPI0_OFFSET,
+                sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->spi[0]), 0));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[0]), 0,
+        qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ,
+                               INTERRUPT_SPI));
+
     create_unimp(s, &s->txp, "bcm2835-txp", TXP_OFFSET, 0x1000);
     create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40);
     create_unimp(s, &s->i2s, "bcm2835-i2s", I2S_OFFSET, 0x100);
     create_unimp(s, &s->smi, "bcm2835-smi", SMI_OFFSET, 0x100);
-    create_unimp(s, &s->spi[0], "bcm2835-spi0", SPI0_OFFSET, 0x20);
     create_unimp(s, &s->bscsl, "bcm2835-spis", BSC_SL_OFFSET, 0x100);
     create_unimp(s, &s->i2c[0], "bcm2835-i2c0", BSC0_OFFSET, 0x20);
     create_unimp(s, &s->i2c[1], "bcm2835-i2c1", BSC1_OFFSET, 0x20);
diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h
index d724a2fc28..0203bb79d8 100644
--- a/include/hw/arm/bcm2835_peripherals.h
+++ b/include/hw/arm/bcm2835_peripherals.h
@@ -31,6 +31,7 @@
 #include "hw/gpio/bcm2835_gpio.h"
 #include "hw/timer/bcm2835_systmr.h"
 #include "hw/usb/hcd-dwc2.h"
+#include "hw/ssi/bcm2835_spi.h"
 #include "hw/misc/unimp.h"
 #include "qom/object.h"
 
@@ -66,7 +67,7 @@ struct BCM2835PeripheralState {
     BCM2835GpioState gpio;
     Bcm2835ThermalState thermal;
     UnimplementedDeviceState i2s;
-    UnimplementedDeviceState spi[1];
+    BCM2835SPIState spi[1];
     UnimplementedDeviceState i2c[3];
     UnimplementedDeviceState otp;
     UnimplementedDeviceState dbus;
-- 
2.34.1