[PATCH v0 2/2] aspeed: fix hardcode boot address 0

[Jamin Lin via <qemu-devel@nongnu.org>]

In the previous design of QEMU model for ASPEED SOCs, it set the boot
address at 0 which was the hardcode setting for ast10x0, ast2600,
ast2500 and ast2400.

According to the design of ast2700, it has bootmcu which is used for
executing SPL and initialize DRAM, then, CPUs(cortex-a35)
execute u-boot, kernel and rofs. QEMU will only support CPU(coretax-a35)
parts and the boot address is "0x400000000" for ast2700.
Therefore, fixed hardcode boot address 0.

Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 hw/arm/aspeed.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 218b81298e..82a92e8142 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -289,12 +289,14 @@ static void aspeed_install_boot_rom(AspeedMachineState *bmc, BlockBackend *blk,
                                     uint64_t rom_size)
 {
     AspeedSoCState *soc = bmc->soc;
+    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(soc);
 
     memory_region_init_rom(&bmc->boot_rom, NULL, "aspeed.boot_rom", rom_size,
                            &error_abort);
     memory_region_add_subregion_overlap(&soc->spi_boot_container, 0,
                                         &bmc->boot_rom, 1);
-    write_boot_rom(blk, ASPEED_SOC_SPI_BOOT_ADDR, rom_size, &error_abort);
+    write_boot_rom(blk, sc->memmap[ASPEED_DEV_SPI_BOOT],
+                   rom_size, &error_abort);
 }
 
 void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype,
-- 
2.34.1