From: deller@kernel.org
To: qemu-devel@nongnu.org
Cc: Richard Henderson <richard.henderson@linaro.org>,
Sven Schnelle <svens@stackframe.org>,
Jason Wang <jasowang@redhat.com>, Helge Deller <deller@gmx.de>
Subject: [PULL 03/12] hw/pci-host/astro: Avoid aborting on access failure
Date: Tue, 13 Feb 2024 00:47:14 +0100 [thread overview]
Message-ID: <20240212234723.222847-4-deller@kernel.org> (raw)
In-Reply-To: <20240212234723.222847-1-deller@kernel.org>
From: Helge Deller <deller@gmx.de>
Instead of stopping the emulation, report a MEMTX_DECODE_ERROR if the OS
tries to access non-existent registers.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
hw/pci-host/astro.c | 27 +++++++++++----------------
1 file changed, 11 insertions(+), 16 deletions(-)
diff --git a/hw/pci-host/astro.c b/hw/pci-host/astro.c
index 37d271118c..96d655f5fb 100644
--- a/hw/pci-host/astro.c
+++ b/hw/pci-host/astro.c
@@ -122,10 +122,6 @@ static MemTxResult elroy_chip_read_with_attrs(void *opaque, hwaddr addr,
case 0x0800: /* IOSAPIC_REG_SELECT */
val = s->iosapic_reg_select;
break;
- case 0x0808:
- val = UINT64_MAX; /* XXX: tbc. */
- g_assert_not_reached();
- break;
case 0x0810: /* IOSAPIC_REG_WINDOW */
switch (s->iosapic_reg_select) {
case 0x01: /* IOSAPIC_REG_VERSION */
@@ -135,15 +131,15 @@ static MemTxResult elroy_chip_read_with_attrs(void *opaque, hwaddr addr,
if (s->iosapic_reg_select < ARRAY_SIZE(s->iosapic_reg)) {
val = s->iosapic_reg[s->iosapic_reg_select];
} else {
- trace_iosapic_reg_read(s->iosapic_reg_select, size, val);
- g_assert_not_reached();
+ val = 0;
+ ret = MEMTX_DECODE_ERROR;
}
}
trace_iosapic_reg_read(s->iosapic_reg_select, size, val);
break;
default:
- trace_elroy_read(addr, size, val);
- g_assert_not_reached();
+ val = 0;
+ ret = MEMTX_DECODE_ERROR;
}
trace_elroy_read(addr, size, val);
@@ -191,7 +187,7 @@ static MemTxResult elroy_chip_write_with_attrs(void *opaque, hwaddr addr,
if (s->iosapic_reg_select < ARRAY_SIZE(s->iosapic_reg)) {
s->iosapic_reg[s->iosapic_reg_select] = val;
} else {
- g_assert_not_reached();
+ return MEMTX_DECODE_ERROR;
}
break;
case 0x0840: /* IOSAPIC_REG_EOI */
@@ -204,7 +200,7 @@ static MemTxResult elroy_chip_write_with_attrs(void *opaque, hwaddr addr,
}
break;
default:
- g_assert_not_reached();
+ return MEMTX_DECODE_ERROR;
}
return MEMTX_OK;
}
@@ -594,8 +590,8 @@ static MemTxResult astro_chip_read_with_attrs(void *opaque, hwaddr addr,
#undef EMPTY_PORT
default:
- trace_astro_chip_read(addr, size, val);
- g_assert_not_reached();
+ val = 0;
+ ret = MEMTX_DECODE_ERROR;
}
/* for 32-bit accesses mask return value */
@@ -610,6 +606,7 @@ static MemTxResult astro_chip_write_with_attrs(void *opaque, hwaddr addr,
uint64_t val, unsigned size,
MemTxAttrs attrs)
{
+ MemTxResult ret = MEMTX_OK;
AstroState *s = opaque;
trace_astro_chip_write(addr, size, val);
@@ -686,11 +683,9 @@ static MemTxResult astro_chip_write_with_attrs(void *opaque, hwaddr addr,
#undef EMPTY_PORT
default:
- /* Controlled by astro_chip_mem_valid above. */
- trace_astro_chip_write(addr, size, val);
- g_assert_not_reached();
+ ret = MEMTX_DECODE_ERROR;
}
- return MEMTX_OK;
+ return ret;
}
static const MemoryRegionOps astro_chip_ops = {
--
2.43.0
next prev parent reply other threads:[~2024-02-12 23:49 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-12 23:47 [PULL 00/12] Hppa64 patches deller
2024-02-12 23:47 ` [PULL 01/12] disas/hppa: Add disassembly for qemu specific instructions deller
2024-02-12 23:47 ` [PULL 02/12] target/hppa: Add "diag 0x101" for console output support deller
2024-02-12 23:47 ` deller [this message]
2024-02-12 23:47 ` [PULL 04/12] hw/pci-host/astro: Implement Hard Fail and Soft Fail mode deller
2024-02-12 23:47 ` [PULL 05/12] lasi: allow access to LAN MAC address registers deller
2024-02-12 23:47 ` [PULL 06/12] target/hppa: Implement do_transaction_failed handler for I/O errors deller
2024-02-12 23:47 ` [PULL 07/12] lasi: Add reset I/O ports for LASI audio and FDC deller
2024-02-12 23:47 ` [PULL 08/12] target/hppa: Allow read-access to PSW with rsm 0, reg instruction deller
2024-02-12 23:47 ` [PULL 09/12] target/hppa: PDC_BTLB_INFO uses 32-bit ints deller
2024-02-12 23:47 ` [PULL 10/12] hw/net/tulip: add chip status register values deller
2024-02-12 23:47 ` [PULL 11/12] target/hppa: Update SeaBIOS-hppa to version 16 deller
2024-02-12 23:47 ` [PULL 12/12] hw/hppa/machine: Load 64-bit firmware on 64-bit machines deller
2024-02-13 15:50 ` [PULL 00/12] Hppa64 patches Peter Maydell
2024-02-13 18:09 ` Michael Tokarev
2024-02-13 19:16 ` Helge Deller
2024-02-14 9:07 ` Michael Tokarev
2024-02-14 14:58 ` Helge Deller
-- strict thread matches above, loose matches on Subject: below --
2024-02-11 12:28 deller
2024-02-11 12:29 ` [PULL 03/12] hw/pci-host/astro: Avoid aborting on access failure deller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240212234723.222847-4-deller@kernel.org \
--to=deller@kernel.org \
--cc=deller@gmx.de \
--cc=jasowang@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=svens@stackframe.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).