qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Inès Varhol" <ines.varhol@telecom-paris.fr>
To: qemu-devel@nongnu.org
Cc: "Samuel Tardieu" <samuel.tardieu@telecom-paris.fr>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	"Philippe Mathieu-Daudé" <philmd@linaro.org>,
	"Thomas Huth" <thuth@redhat.com>,
	"Alistair Francis" <alistair@alistair23.me>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Inès Varhol" <ines.varhol@telecom-paris.fr>,
	"Arnaud Minier" <arnaud.minier@telecom-paris.fr>,
	"Laurent Vivier" <lvivier@redhat.com>,
	qemu-arm@nongnu.org
Subject: [PATCH v6 2/3] hw/arm: Connect STM32L4x5 GPIO to STM32L4x5 SoC
Date: Sat, 24 Feb 2024 11:47:33 +0100	[thread overview]
Message-ID: <20240224105417.195674-3-ines.varhol@telecom-paris.fr> (raw)
In-Reply-To: <20240224105417.195674-1-ines.varhol@telecom-paris.fr>

Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 include/hw/arm/stm32l4x5_soc.h     |  2 +
 include/hw/gpio/stm32l4x5_gpio.h   |  1 +
 include/hw/misc/stm32l4x5_syscfg.h |  3 +-
 hw/arm/stm32l4x5_soc.c             | 71 +++++++++++++++++++++++-------
 hw/misc/stm32l4x5_syscfg.c         |  1 +
 hw/arm/Kconfig                     |  3 +-
 6 files changed, 63 insertions(+), 18 deletions(-)

diff --git a/include/hw/arm/stm32l4x5_soc.h b/include/hw/arm/stm32l4x5_soc.h
index 1f71298b45..cb4da08629 100644
--- a/include/hw/arm/stm32l4x5_soc.h
+++ b/include/hw/arm/stm32l4x5_soc.h
@@ -29,6 +29,7 @@
 #include "hw/misc/stm32l4x5_syscfg.h"
 #include "hw/misc/stm32l4x5_exti.h"
 #include "hw/misc/stm32l4x5_rcc.h"
+#include "hw/gpio/stm32l4x5_gpio.h"
 #include "qom/object.h"
 
 #define TYPE_STM32L4X5_SOC "stm32l4x5-soc"
@@ -45,6 +46,7 @@ struct Stm32l4x5SocState {
     Stm32l4x5ExtiState exti;
     Stm32l4x5SyscfgState syscfg;
     Stm32l4x5RccState rcc;
+    Stm32l4x5GpioState gpio[NUM_GPIOS];
 
     MemoryRegion sram1;
     MemoryRegion sram2;
diff --git a/include/hw/gpio/stm32l4x5_gpio.h b/include/hw/gpio/stm32l4x5_gpio.h
index 0d361f3410..878bd19fc9 100644
--- a/include/hw/gpio/stm32l4x5_gpio.h
+++ b/include/hw/gpio/stm32l4x5_gpio.h
@@ -25,6 +25,7 @@
 #define TYPE_STM32L4X5_GPIO "stm32l4x5-gpio"
 OBJECT_DECLARE_SIMPLE_TYPE(Stm32l4x5GpioState, STM32L4X5_GPIO)
 
+#define NUM_GPIOS 8
 #define GPIO_NUM_PINS 16
 
 struct Stm32l4x5GpioState {
diff --git a/include/hw/misc/stm32l4x5_syscfg.h b/include/hw/misc/stm32l4x5_syscfg.h
index 29c3522f9d..23bb564150 100644
--- a/include/hw/misc/stm32l4x5_syscfg.h
+++ b/include/hw/misc/stm32l4x5_syscfg.h
@@ -26,12 +26,11 @@
 
 #include "hw/sysbus.h"
 #include "qom/object.h"
+#include "hw/gpio/stm32l4x5_gpio.h"
 
 #define TYPE_STM32L4X5_SYSCFG "stm32l4x5-syscfg"
 OBJECT_DECLARE_SIMPLE_TYPE(Stm32l4x5SyscfgState, STM32L4X5_SYSCFG)
 
-#define NUM_GPIOS 8
-#define GPIO_NUM_PINS 16
 #define SYSCFG_NUM_EXTICR 4
 
 struct Stm32l4x5SyscfgState {
diff --git a/hw/arm/stm32l4x5_soc.c b/hw/arm/stm32l4x5_soc.c
index 347a5377e5..072671bdfb 100644
--- a/hw/arm/stm32l4x5_soc.c
+++ b/hw/arm/stm32l4x5_soc.c
@@ -27,6 +27,7 @@
 #include "exec/address-spaces.h"
 #include "sysemu/sysemu.h"
 #include "hw/arm/stm32l4x5_soc.h"
+#include "hw/gpio/stm32l4x5_gpio.h"
 #include "hw/qdev-clock.h"
 #include "hw/misc/unimp.h"
 
@@ -78,6 +79,22 @@ static const int exti_irq[NUM_EXTI_IRQ] = {
 #define RCC_BASE_ADDRESS 0x40021000
 #define RCC_IRQ 5
 
+static const struct {
+    uint32_t addr;
+    uint32_t moder_reset;
+    uint32_t ospeedr_reset;
+    uint32_t pupdr_reset;
+} stm32l4x5_gpio_cfg[NUM_GPIOS] = {
+    { 0x48000000, 0xABFFFFFF, 0x0C000000, 0x64000000 },
+    { 0x48000400, 0xFFFFFEBF, 0x00000000, 0x00000100 },
+    { 0x48000800, 0xFFFFFFFF, 0x00000000, 0x00000000 },
+    { 0x48000C00, 0xFFFFFFFF, 0x00000000, 0x00000000 },
+    { 0x48001000, 0xFFFFFFFF, 0x00000000, 0x00000000 },
+    { 0x48001400, 0xFFFFFFFF, 0x00000000, 0x00000000 },
+    { 0x48001800, 0xFFFFFFFF, 0x00000000, 0x00000000 },
+    { 0x48001C00, 0x0000000F, 0x00000000, 0x00000000 },
+};
+
 static void stm32l4x5_soc_initfn(Object *obj)
 {
     Stm32l4x5SocState *s = STM32L4X5_SOC(obj);
@@ -85,6 +102,11 @@ static void stm32l4x5_soc_initfn(Object *obj)
     object_initialize_child(obj, "exti", &s->exti, TYPE_STM32L4X5_EXTI);
     object_initialize_child(obj, "syscfg", &s->syscfg, TYPE_STM32L4X5_SYSCFG);
     object_initialize_child(obj, "rcc", &s->rcc, TYPE_STM32L4X5_RCC);
+
+    for (unsigned i = 0; i < NUM_GPIOS; i++) {
+        g_autofree char *name = g_strdup_printf("gpio%c", 'a' + i);
+        object_initialize_child(obj, name, &s->gpio[i], TYPE_STM32L4X5_GPIO);
+    }
 }
 
 static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp)
@@ -93,8 +115,9 @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp)
     Stm32l4x5SocState *s = STM32L4X5_SOC(dev_soc);
     const Stm32l4x5SocClass *sc = STM32L4X5_SOC_GET_CLASS(dev_soc);
     MemoryRegion *system_memory = get_system_memory();
-    DeviceState *armv7m;
+    DeviceState *armv7m, *dev;
     SysBusDevice *busdev;
+    uint32_t pin_index;
 
     if (!memory_region_init_rom(&s->flash, OBJECT(dev_soc), "flash",
                                 sc->flash_size, errp)) {
@@ -135,17 +158,43 @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp)
         return;
     }
 
+    /* GPIOs */
+    for (unsigned i = 0; i < NUM_GPIOS; i++) {
+        g_autofree char *name = g_strdup_printf("%c", 'A' + i);
+        dev = DEVICE(&s->gpio[i]);
+        qdev_prop_set_string(dev, "name", name);
+        qdev_prop_set_uint32(dev, "mode-reset",
+                             stm32l4x5_gpio_cfg[i].moder_reset);
+        qdev_prop_set_uint32(dev, "ospeed-reset",
+                             stm32l4x5_gpio_cfg[i].ospeedr_reset);
+        qdev_prop_set_uint32(dev, "pupd-reset",
+                            stm32l4x5_gpio_cfg[i].pupdr_reset);
+        busdev = SYS_BUS_DEVICE(&s->gpio[i]);
+        g_free(name);
+        name = g_strdup_printf("gpio%c-out", 'a' + i);
+        qdev_connect_clock_in(DEVICE(&s->gpio[i]), "clk",
+            qdev_get_clock_out(DEVICE(&(s->rcc)), name));
+        if (!sysbus_realize(busdev, errp)) {
+            return;
+        }
+        sysbus_mmio_map(busdev, 0, stm32l4x5_gpio_cfg[i].addr);
+    }
+
     /* System configuration controller */
     busdev = SYS_BUS_DEVICE(&s->syscfg);
     if (!sysbus_realize(busdev, errp)) {
         return;
     }
     sysbus_mmio_map(busdev, 0, SYSCFG_ADDR);
-    /*
-     * TODO: when the GPIO device is implemented, connect it
-     * to SYCFG using `qdev_connect_gpio_out`, NUM_GPIOS and
-     * GPIO_NUM_PINS.
-     */
+
+    for (unsigned i = 0; i < NUM_GPIOS; i++) {
+        for (unsigned j = 0; j < GPIO_NUM_PINS; j++) {
+            pin_index = GPIO_NUM_PINS * i + j;
+            qdev_connect_gpio_out(DEVICE(&s->gpio[i]), j,
+                                  qdev_get_gpio_in(DEVICE(&s->syscfg),
+                                  pin_index));
+        }
+    }
 
     /* EXTI device */
     busdev = SYS_BUS_DEVICE(&s->exti);
@@ -157,7 +206,7 @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp)
         sysbus_connect_irq(busdev, i, qdev_get_gpio_in(armv7m, exti_irq[i]));
     }
 
-    for (unsigned i = 0; i < 16; i++) {
+    for (unsigned i = 0; i < GPIO_NUM_PINS; i++) {
         qdev_connect_gpio_out(DEVICE(&s->syscfg), i,
                               qdev_get_gpio_in(DEVICE(&s->exti), i));
     }
@@ -242,14 +291,6 @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp)
     /* RESERVED:    0x40024400, 0x7FDBC00 */
 
     /* AHB2 BUS */
-    create_unimplemented_device("GPIOA",     0x48000000, 0x400);
-    create_unimplemented_device("GPIOB",     0x48000400, 0x400);
-    create_unimplemented_device("GPIOC",     0x48000800, 0x400);
-    create_unimplemented_device("GPIOD",     0x48000C00, 0x400);
-    create_unimplemented_device("GPIOE",     0x48001000, 0x400);
-    create_unimplemented_device("GPIOF",     0x48001400, 0x400);
-    create_unimplemented_device("GPIOG",     0x48001800, 0x400);
-    create_unimplemented_device("GPIOH",     0x48001C00, 0x400);
     /* RESERVED:    0x48002000, 0x7FDBC00 */
     create_unimplemented_device("OTG_FS",    0x50000000, 0x40000);
     create_unimplemented_device("ADC",       0x50040000, 0x400);
diff --git a/hw/misc/stm32l4x5_syscfg.c b/hw/misc/stm32l4x5_syscfg.c
index fd68cb800b..3dafc00b49 100644
--- a/hw/misc/stm32l4x5_syscfg.c
+++ b/hw/misc/stm32l4x5_syscfg.c
@@ -27,6 +27,7 @@
 #include "hw/irq.h"
 #include "migration/vmstate.h"
 #include "hw/misc/stm32l4x5_syscfg.h"
+#include "hw/gpio/stm32l4x5_gpio.h"
 
 #define SYSCFG_MEMRMP 0x00
 #define SYSCFG_CFGR1 0x04
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 92b72d56dc..5776dbb19f 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -463,9 +463,10 @@ config STM32L4X5_SOC
     bool
     select ARM_V7M
     select OR_IRQ
-    select STM32L4X5_SYSCFG
     select STM32L4X5_EXTI
+    select STM32L4X5_SYSCFG
     select STM32L4X5_RCC
+    select STM32L4X5_GPIO
 
 config XLNX_ZYNQMP_ARM
     bool
-- 
2.43.2



  parent reply	other threads:[~2024-02-24 10:55 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-24 10:47 [PATCH v6 0/3] Add device STM32L4x5 GPIO Inès Varhol
2024-02-24 10:47 ` [PATCH v6 1/3] hw/gpio: Implement " Inès Varhol
2024-02-26  0:06   ` Alistair Francis
2024-02-24 10:47 ` Inès Varhol [this message]
2024-02-26  0:08   ` [PATCH v6 2/3] hw/arm: Connect STM32L4x5 GPIO to STM32L4x5 SoC Alistair Francis
2024-02-24 10:47 ` [PATCH v6 3/3] tests/qtest: Add STM32L4x5 GPIO QTest testcase Inès Varhol
2024-03-05 16:10 ` [PATCH v6 0/3] Add device STM32L4x5 GPIO Peter Maydell
2024-03-05 21:10   ` Inès Varhol

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240224105417.195674-3-ines.varhol@telecom-paris.fr \
    --to=ines.varhol@telecom-paris.fr \
    --cc=alistair@alistair23.me \
    --cc=arnaud.minier@telecom-paris.fr \
    --cc=lvivier@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=samuel.tardieu@telecom-paris.fr \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).