* [PATCH v5 1/3] hw/pci: Add all Data Object Types defined in PCIe r6.0
2024-03-07 0:58 [PATCH v5 0/3] Initial support for SPDM Responders Alistair Francis
@ 2024-03-07 0:58 ` Alistair Francis
2024-03-07 0:58 ` [PATCH v5 2/3] backends: Initial support for SPDM socket support Alistair Francis
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Alistair Francis @ 2024-03-07 0:58 UTC (permalink / raw)
To: marcel.apfelbaum, Jonathan.Cameron, its, mst, hchkuo,
wilfred.mallawa, cbrowy, kbusch, lukas, jiewen.yao, qemu-devel
Cc: Alistair Francis, qemu-block, Paolo Bonzini, alistair23,
Jonathan Cameron
Add all of the defined protocols/features from the PCIe-SIG r6.0
"Table 6-32 PCI-SIG defined Data Object Types (Vendor ID = 0001h)"
table.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
include/hw/pci/pcie_doe.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/hw/pci/pcie_doe.h b/include/hw/pci/pcie_doe.h
index 87dc17dcef..15d94661f9 100644
--- a/include/hw/pci/pcie_doe.h
+++ b/include/hw/pci/pcie_doe.h
@@ -46,6 +46,8 @@ REG32(PCI_DOE_CAP_STATUS, 0)
/* PCI-SIG defined Data Object Types - r6.0 Table 6-32 */
#define PCI_SIG_DOE_DISCOVERY 0x00
+#define PCI_SIG_DOE_CMA 0x01
+#define PCI_SIG_DOE_SECURED_CMA 0x02
#define PCI_DOE_DW_SIZE_MAX (1 << 18)
#define PCI_DOE_PROTOCOL_NUM_MAX 256
--
2.44.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v5 2/3] backends: Initial support for SPDM socket support
2024-03-07 0:58 [PATCH v5 0/3] Initial support for SPDM Responders Alistair Francis
2024-03-07 0:58 ` [PATCH v5 1/3] hw/pci: Add all Data Object Types defined in PCIe r6.0 Alistair Francis
@ 2024-03-07 0:58 ` Alistair Francis
2024-03-07 10:12 ` Philippe Mathieu-Daudé
2024-03-07 0:58 ` [PATCH v5 3/3] hw/nvme: Add SPDM over DOE support Alistair Francis
2024-03-07 9:42 ` [PATCH v5 0/3] Initial support for SPDM Responders Jonathan Cameron via
3 siblings, 1 reply; 7+ messages in thread
From: Alistair Francis @ 2024-03-07 0:58 UTC (permalink / raw)
To: marcel.apfelbaum, Jonathan.Cameron, its, mst, hchkuo,
wilfred.mallawa, cbrowy, kbusch, lukas, jiewen.yao, qemu-devel
Cc: Alistair Francis, qemu-block, Paolo Bonzini, alistair23,
Jonathan Cameron, Jonathan Cameron
From: Huai-Cheng Kuo <hchkuo@avery-design.com.tw>
SPDM enables authentication, attestation and key exchange to assist in
providing infrastructure security enablement. It's a standard published
by the DMTF [1].
SPDM supports multiple transports, including PCIe DOE and MCTP.
This patch adds support to QEMU to connect to an external SPDM
instance.
SPDM support can be added to any QEMU device by exposing a
TCP socket to a SPDM server. The server can then implement the SPDM
decoding/encoding support, generally using libspdm [2].
This is similar to how the current TPM implementation works and means
that the heavy lifting of setting up certificate chains, capabilities,
measurements and complex crypto can be done outside QEMU by a well
supported and tested library.
1: https://www.dmtf.org/standards/SPDM
2: https://github.com/DMTF/libspdm
Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw>
Signed-off-by: Chris Browy <cbrowy@avery-design.com>
Co-developed-by: Jonathan Cameron <Jonathan.cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ Changes by WM
- Bug fixes from testing
]
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
[ Changes by AF:
- Convert to be more QEMU-ified
- Move to backends as it isn't PCIe specific
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
MAINTAINERS | 6 +
include/sysemu/spdm-socket.h | 44 +++++++
backends/spdm-socket.c | 216 +++++++++++++++++++++++++++++++++++
backends/Kconfig | 4 +
backends/meson.build | 2 +
5 files changed, 272 insertions(+)
create mode 100644 include/sysemu/spdm-socket.h
create mode 100644 backends/spdm-socket.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 4183f2f3ab..a07706c225 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3395,6 +3395,12 @@ F: tests/qtest/*tpm*
F: docs/specs/tpm.rst
T: git https://github.com/stefanberger/qemu-tpm.git tpm-next
+SPDM
+M: Alistair Francis <alistair.francis@wdc.com>
+S: Maintained
+F: backends/spdm-socket.c
+F: include/sysemu/spdm-socket.h
+
Checkpatch
S: Odd Fixes
F: scripts/checkpatch.pl
diff --git a/include/sysemu/spdm-socket.h b/include/sysemu/spdm-socket.h
new file mode 100644
index 0000000000..24e6fccb83
--- /dev/null
+++ b/include/sysemu/spdm-socket.h
@@ -0,0 +1,44 @@
+/*
+ * QEMU SPDM socket support
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef SPDM_REQUESTER_H
+#define SPDM_REQUESTER_H
+
+int spdm_socket_connect(uint16_t port, Error **errp);
+uint32_t spdm_socket_rsp(const int socket, uint32_t transport_type,
+ void *req, uint32_t req_len,
+ void *rsp, uint32_t rsp_len);
+void spdm_socket_close(const int socket, uint32_t transport_type);
+
+#define SPDM_SOCKET_COMMAND_NORMAL 0x0001
+#define SPDM_SOCKET_COMMAND_OOB_ENCAP_KEY_UPDATE 0x8001
+#define SPDM_SOCKET_COMMAND_CONTINUE 0xFFFD
+#define SPDM_SOCKET_COMMAND_SHUTDOWN 0xFFFE
+#define SPDM_SOCKET_COMMAND_UNKOWN 0xFFFF
+#define SPDM_SOCKET_COMMAND_TEST 0xDEAD
+
+#define SPDM_SOCKET_TRANSPORT_TYPE_MCTP 0x01
+#define SPDM_SOCKET_TRANSPORT_TYPE_PCI_DOE 0x02
+
+#define SPDM_SOCKET_MAX_MESSAGE_BUFFER_SIZE 0x1200
+
+#endif
diff --git a/backends/spdm-socket.c b/backends/spdm-socket.c
new file mode 100644
index 0000000000..d0663d696c
--- /dev/null
+++ b/backends/spdm-socket.c
@@ -0,0 +1,216 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * QEMU SPDM socket support
+ *
+ * This is based on:
+ * https://github.com/DMTF/spdm-emu/blob/07c0a838bcc1c6207c656ac75885c0603e344b6f/spdm_emu/spdm_emu_common/command.c
+ * but has been re-written to match QEMU style
+ *
+ * Copyright (c) 2021, DMTF. All rights reserved.
+ * Copyright (c) 2023. Western Digital Corporation or its affiliates.
+ */
+
+#include "qemu/osdep.h"
+#include "sysemu/spdm-socket.h"
+#include "qapi/error.h"
+
+static bool read_bytes(const int socket, uint8_t *buffer,
+ size_t number_of_bytes)
+{
+ ssize_t number_received = 0;
+ ssize_t result;
+
+ while (number_received < number_of_bytes) {
+ result = recv(socket, buffer + number_received,
+ number_of_bytes - number_received, 0);
+ if (result <= 0) {
+ return false;
+ }
+ number_received += result;
+ }
+ return true;
+}
+
+static bool read_data32(const int socket, uint32_t *data)
+{
+ bool result;
+
+ result = read_bytes(socket, (uint8_t *)data, sizeof(uint32_t));
+ if (!result) {
+ return result;
+ }
+ *data = ntohl(*data);
+ return true;
+}
+
+static bool read_multiple_bytes(const int socket, uint8_t *buffer,
+ uint32_t *bytes_received,
+ uint32_t max_buffer_length)
+{
+ uint32_t length;
+ bool result;
+
+ result = read_data32(socket, &length);
+ if (!result) {
+ return result;
+ }
+
+ if (length > max_buffer_length) {
+ return false;
+ }
+
+ if (bytes_received) {
+ *bytes_received = length;
+ }
+
+ if (length == 0) {
+ return true;
+ }
+
+ return read_bytes(socket, buffer, length);
+}
+
+static bool receive_platform_data(const int socket,
+ uint32_t transport_type,
+ uint32_t *command,
+ uint8_t *receive_buffer,
+ uint32_t *bytes_to_receive)
+{
+ bool result;
+ uint32_t response;
+ uint32_t bytes_received;
+
+ result = read_data32(socket, &response);
+ if (!result) {
+ return result;
+ }
+ *command = response;
+
+ result = read_data32(socket, &transport_type);
+ if (!result) {
+ return result;
+ }
+
+ bytes_received = 0;
+ result = read_multiple_bytes(socket, receive_buffer, &bytes_received,
+ *bytes_to_receive);
+ if (!result) {
+ return result;
+ }
+ *bytes_to_receive = bytes_received;
+
+ return result;
+}
+
+static bool write_bytes(const int socket, const uint8_t *buffer,
+ uint32_t number_of_bytes)
+{
+ ssize_t number_sent = 0;
+ ssize_t result;
+
+ while (number_sent < number_of_bytes) {
+ result = send(socket, buffer + number_sent,
+ number_of_bytes - number_sent, 0);
+ if (result == -1) {
+ return false;
+ }
+ number_sent += result;
+ }
+ return true;
+}
+
+static bool write_data32(const int socket, uint32_t data)
+{
+ data = htonl(data);
+ return write_bytes(socket, (uint8_t *)&data, sizeof(uint32_t));
+}
+
+static bool write_multiple_bytes(const int socket, const uint8_t *buffer,
+ uint32_t bytes_to_send)
+{
+ bool result;
+
+ result = write_data32(socket, bytes_to_send);
+ if (!result) {
+ return result;
+ }
+
+ return write_bytes(socket, buffer, bytes_to_send);
+}
+
+static bool send_platform_data(const int socket,
+ uint32_t transport_type, uint32_t command,
+ const uint8_t *send_buffer, size_t bytes_to_send)
+{
+ bool result;
+
+ result = write_data32(socket, command);
+ if (!result) {
+ return result;
+ }
+
+ result = write_data32(socket, transport_type);
+ if (!result) {
+ return result;
+ }
+
+ return write_multiple_bytes(socket, send_buffer, bytes_to_send);
+}
+
+int spdm_socket_connect(uint16_t port, Error **errp)
+{
+ int client_socket;
+ struct sockaddr_in server_addr;
+
+ client_socket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
+ if (client_socket < 0) {
+ error_setg(errp, "cannot create socket: %s", strerror(errno));
+ return -1;
+ }
+
+ memset((char *)&server_addr, 0, sizeof(server_addr));
+ server_addr.sin_family = AF_INET;
+ server_addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+ server_addr.sin_port = htons(port);
+
+
+ if (connect(client_socket, (struct sockaddr *)&server_addr,
+ sizeof(server_addr)) < 0) {
+ error_setg(errp, "cannot connect: %s", strerror(errno));
+ close(client_socket);
+ return -1;
+ }
+
+ return client_socket;
+}
+
+uint32_t spdm_socket_rsp(const int socket, uint32_t transport_type,
+ void *req, uint32_t req_len,
+ void *rsp, uint32_t rsp_len)
+{
+ uint32_t command;
+ bool result;
+
+ result = send_platform_data(socket, transport_type,
+ SPDM_SOCKET_COMMAND_NORMAL,
+ req, req_len);
+ if (!result) {
+ return 0;
+ }
+
+ result = receive_platform_data(socket, transport_type, &command,
+ (uint8_t *)rsp, &rsp_len);
+ if (!result) {
+ return 0;
+ }
+
+ assert(command != 0);
+
+ return rsp_len;
+}
+
+void spdm_socket_close(const int socket, uint32_t transport_type)
+{
+ send_platform_data(socket, transport_type,
+ SPDM_SOCKET_COMMAND_SHUTDOWN, NULL, 0);
+}
diff --git a/backends/Kconfig b/backends/Kconfig
index 2cb23f62fa..d3dbe19868 100644
--- a/backends/Kconfig
+++ b/backends/Kconfig
@@ -3,3 +3,7 @@ source tpm/Kconfig
config IOMMUFD
bool
depends on VFIO
+
+config SPDM_SOCKET
+ bool
+ default y
diff --git a/backends/meson.build b/backends/meson.build
index 8b2b111497..e5d4db7971 100644
--- a/backends/meson.build
+++ b/backends/meson.build
@@ -31,4 +31,6 @@ endif
system_ss.add(when: gio, if_true: files('dbus-vmstate.c'))
system_ss.add(when: 'CONFIG_SGX', if_true: files('hostmem-epc.c'))
+system_ss.add(when: 'CONFIG_SPDM_SOCKET', if_true: files('spdm-socket.c'))
+
subdir('tpm')
--
2.44.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v5 2/3] backends: Initial support for SPDM socket support
2024-03-07 0:58 ` [PATCH v5 2/3] backends: Initial support for SPDM socket support Alistair Francis
@ 2024-03-07 10:12 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 7+ messages in thread
From: Philippe Mathieu-Daudé @ 2024-03-07 10:12 UTC (permalink / raw)
To: Alistair Francis, marcel.apfelbaum, Jonathan.Cameron, its, mst,
hchkuo, wilfred.mallawa, cbrowy, kbusch, lukas, jiewen.yao,
qemu-devel
Cc: Alistair Francis, qemu-block, Paolo Bonzini
On 7/3/24 01:58, Alistair Francis wrote:
> From: Huai-Cheng Kuo <hchkuo@avery-design.com.tw>
>
> SPDM enables authentication, attestation and key exchange to assist in
> providing infrastructure security enablement. It's a standard published
> by the DMTF [1].
>
> SPDM supports multiple transports, including PCIe DOE and MCTP.
> This patch adds support to QEMU to connect to an external SPDM
> instance.
>
> SPDM support can be added to any QEMU device by exposing a
> TCP socket to a SPDM server. The server can then implement the SPDM
> decoding/encoding support, generally using libspdm [2].
>
> This is similar to how the current TPM implementation works and means
> that the heavy lifting of setting up certificate chains, capabilities,
> measurements and complex crypto can be done outside QEMU by a well
> supported and tested library.
>
> 1: https://www.dmtf.org/standards/SPDM
> 2: https://github.com/DMTF/libspdm
>
> Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw>
> Signed-off-by: Chris Browy <cbrowy@avery-design.com>
> Co-developed-by: Jonathan Cameron <Jonathan.cameron@huawei.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> [ Changes by WM
> - Bug fixes from testing
> ]
> Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
> [ Changes by AF:
> - Convert to be more QEMU-ified
> - Move to backends as it isn't PCIe specific
> ]
> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> ---
> MAINTAINERS | 6 +
> include/sysemu/spdm-socket.h | 44 +++++++
> backends/spdm-socket.c | 216 +++++++++++++++++++++++++++++++++++
> backends/Kconfig | 4 +
> backends/meson.build | 2 +
> 5 files changed, 272 insertions(+)
> create mode 100644 include/sysemu/spdm-socket.h
> create mode 100644 backends/spdm-socket.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4183f2f3ab..a07706c225 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3395,6 +3395,12 @@ F: tests/qtest/*tpm*
> F: docs/specs/tpm.rst
> T: git https://github.com/stefanberger/qemu-tpm.git tpm-next
>
> +SPDM
> +M: Alistair Francis <alistair.francis@wdc.com>
> +S: Maintained
> +F: backends/spdm-socket.c
> +F: include/sysemu/spdm-socket.h
> +
> Checkpatch
> S: Odd Fixes
> F: scripts/checkpatch.pl
> diff --git a/include/sysemu/spdm-socket.h b/include/sysemu/spdm-socket.h
> new file mode 100644
> index 0000000000..24e6fccb83
> --- /dev/null
> +++ b/include/sysemu/spdm-socket.h
> @@ -0,0 +1,44 @@
> +/*
> + * QEMU SPDM socket support
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +#ifndef SPDM_REQUESTER_H
> +#define SPDM_REQUESTER_H
> +
> +int spdm_socket_connect(uint16_t port, Error **errp);
Could we have a short description on what this function returns
and its arguments?
> +uint32_t spdm_socket_rsp(const int socket, uint32_t transport_type,
> + void *req, uint32_t req_len,
> + void *rsp, uint32_t rsp_len);
Ditto.
> +void spdm_socket_close(const int socket, uint32_t transport_type);
> +
> +#define SPDM_SOCKET_COMMAND_NORMAL 0x0001
> +#define SPDM_SOCKET_COMMAND_OOB_ENCAP_KEY_UPDATE 0x8001
> +#define SPDM_SOCKET_COMMAND_CONTINUE 0xFFFD
> +#define SPDM_SOCKET_COMMAND_SHUTDOWN 0xFFFE
> +#define SPDM_SOCKET_COMMAND_UNKOWN 0xFFFF
> +#define SPDM_SOCKET_COMMAND_TEST 0xDEAD
> +
> +#define SPDM_SOCKET_TRANSPORT_TYPE_MCTP 0x01
> +#define SPDM_SOCKET_TRANSPORT_TYPE_PCI_DOE 0x02
> +
> +#define SPDM_SOCKET_MAX_MESSAGE_BUFFER_SIZE 0x1200
> +
> +#endif
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v5 3/3] hw/nvme: Add SPDM over DOE support
2024-03-07 0:58 [PATCH v5 0/3] Initial support for SPDM Responders Alistair Francis
2024-03-07 0:58 ` [PATCH v5 1/3] hw/pci: Add all Data Object Types defined in PCIe r6.0 Alistair Francis
2024-03-07 0:58 ` [PATCH v5 2/3] backends: Initial support for SPDM socket support Alistair Francis
@ 2024-03-07 0:58 ` Alistair Francis
2024-03-07 10:17 ` Philippe Mathieu-Daudé
2024-03-07 9:42 ` [PATCH v5 0/3] Initial support for SPDM Responders Jonathan Cameron via
3 siblings, 1 reply; 7+ messages in thread
From: Alistair Francis @ 2024-03-07 0:58 UTC (permalink / raw)
To: marcel.apfelbaum, Jonathan.Cameron, its, mst, hchkuo,
wilfred.mallawa, cbrowy, kbusch, lukas, jiewen.yao, qemu-devel
Cc: Alistair Francis, qemu-block, Paolo Bonzini, alistair23,
Jonathan Cameron, Klaus Jensen
From: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Setup Data Object Exchance (DOE) as an extended capability for the NVME
controller and connect SPDM to it (CMA) to it.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Klaus Jensen <k.jensen@samsung.com>
---
docs/specs/index.rst | 1 +
docs/specs/spdm.rst | 122 ++++++++++++++++++++++++++++++++++++
include/hw/pci/pci_device.h | 5 ++
include/hw/pci/pcie_doe.h | 3 +
hw/nvme/ctrl.c | 53 ++++++++++++++++
5 files changed, 184 insertions(+)
create mode 100644 docs/specs/spdm.rst
diff --git a/docs/specs/index.rst b/docs/specs/index.rst
index 1484e3e760..e2d907959a 100644
--- a/docs/specs/index.rst
+++ b/docs/specs/index.rst
@@ -29,6 +29,7 @@ guest hardware that is specific to QEMU.
edu
ivshmem-spec
pvpanic
+ spdm
standard-vga
virt-ctlr
vmcoreinfo
diff --git a/docs/specs/spdm.rst b/docs/specs/spdm.rst
new file mode 100644
index 0000000000..4d0942c1ad
--- /dev/null
+++ b/docs/specs/spdm.rst
@@ -0,0 +1,122 @@
+======================================================
+QEMU Security Protocols and Data Models (SPDM) Support
+======================================================
+
+SPDM enables authentication, attestation and key exchange to assist in
+providing infrastructure security enablement. It's a standard published
+by the `DMTF`_.
+
+QEMU supports connecting to a SPDM responder implementation. This allows an
+external application to emulate the SPDM responder logic for an SPDM device.
+
+Setting up a SPDM server
+========================
+
+When using QEMU with SPDM devices QEMU will connect to a server which
+implements the SPDM functionality.
+
+SPDM-Utils
+----------
+
+You can use `SPDM Utils`_ to emulate a responder. This is the simplest method.
+
+SPDM-Utils is a Linux applications to manage, test and develop devices
+supporting DMTF Security Protocol and Data Model (SPDM). It is written in Rust
+and utilises libspdm.
+
+To use SPDM-Utils you will need to do the following steps. Details are included
+in the SPDM-Utils README.
+
+ 1. `Build libspdm`_
+ 2. `Build SPDM Utils using Cargo`_
+ 3. `Run it as a server`_
+
+spdm-emu
+--------
+
+You can use `spdm emu`_ to model the
+SPDM responder.
+
+.. code-block:: shell
+
+ $ cd spdm-emu
+ $ git submodule init; git submodule update --recursive
+ $ mkdir build; cd build
+ $ cmake -DARCH=x64 -DTOOLCHAIN=GCC -DTARGET=Debug -DCRYPTO=openssl ..
+ $ make -j32
+ $ make copy_sample_key # Build certificates, required for SPDM authentication.
+
+It is worth noting that the certificates should be in compliance with
+PCIe r6.1 sec 6.31.3. This means you will need to add the following to
+openssl.cnf
+
+.. code-block::
+
+ subjectAltName = otherName:2.23.147;UTF8:Vendor=1b36:Device=0010:CC=010802:REV=02:SSVID=1af4:SSID=1100
+ 2.23.147 = ASN1:OID:2.23.147
+
+and then manually regenerate some certificates with:
+
+.. code-block:: shell
+
+ $ openssl req -nodes -newkey ec:param.pem -keyout end_responder.key \
+ -out end_responder.req -sha384 -batch \
+ -subj "/CN=DMTF libspdm ECP384 responder cert"
+
+ $ openssl x509 -req -in end_responder.req -out end_responder.cert \
+ -CA inter.cert -CAkey inter.key -sha384 -days 3650 -set_serial 3 \
+ -extensions v3_end -extfile ../openssl.cnf
+
+ $ openssl asn1parse -in end_responder.cert -out end_responder.cert.der
+
+ $ cat ca.cert.der inter.cert.der end_responder.cert.der > bundle_responder.certchain.der
+
+You can use SPDM-Utils instead as it will generate the correct certificates
+automatically.
+
+The responder can then be launched with
+
+.. code-block:: shell
+
+ $ cd bin
+ $ ./spdm_responder_emu --trans PCI_DOE
+
+Connecting an SPDM NVMe device
+==============================
+
+Once a SPDM server is running we can start QEMU and connect to the server.
+
+For an NVMe device first let's setup a block we can use
+
+.. code-block:: shell
+
+ $ cd qemu-spdm/linux/image
+ $ dd if=/dev/zero of=blknvme bs=1M count=2096 # 2GB NNMe Drive
+
+Then you can add this to your QEMU command line:
+
+.. code-block:: shell
+
+ -drive file=blknvme,if=none,id=mynvme,format=raw \
+ -device nvme,drive=mynvme,serial=deadbeef,spdm=2323
+
+At which point QEMU will try to connect to the SPDM server.
+
+
+.. _DMTF:
+ https://www.dmtf.org/standards/SPDM
+
+.. _SPDM Utils:
+ https://github.com/westerndigitalcorporation/spdm-utils
+
+.. _spdm emu:
+ https://github.com/dmtf/spdm-emu
+
+.. _Build SPDM Utils:
+ https://github.com/westerndigitalcorporation/spdm-utils#building
+
+.. _Generate the certificates:
+ https://github.com/westerndigitalcorporation/spdm-utils#generate-mutable-certificates
+
+.. _Run it as a server:
+ https://github.com/westerndigitalcorporation/spdm-utils#qemu-spdm-device-emulation
diff --git a/include/hw/pci/pci_device.h b/include/hw/pci/pci_device.h
index d3dd0f64b2..b8379c78f1 100644
--- a/include/hw/pci/pci_device.h
+++ b/include/hw/pci/pci_device.h
@@ -3,6 +3,7 @@
#include "hw/pci/pci.h"
#include "hw/pci/pcie.h"
+#include "hw/pci/pcie_doe.h"
#define TYPE_PCI_DEVICE "pci-device"
typedef struct PCIDeviceClass PCIDeviceClass;
@@ -157,6 +158,10 @@ struct PCIDevice {
MSIVectorReleaseNotifier msix_vector_release_notifier;
MSIVectorPollNotifier msix_vector_poll_notifier;
+ /* DOE */
+ DOECap doe_spdm;
+ uint16_t spdm_port;
+
/* ID of standby device in net_failover pair */
char *failover_pair_id;
uint32_t acpi_index;
diff --git a/include/hw/pci/pcie_doe.h b/include/hw/pci/pcie_doe.h
index 15d94661f9..eb8f4e393d 100644
--- a/include/hw/pci/pcie_doe.h
+++ b/include/hw/pci/pcie_doe.h
@@ -108,6 +108,9 @@ struct DOECap {
/* Protocols and its callback response */
DOEProtocol *protocols;
uint16_t protocol_num;
+
+ /* Used for spdm-socket */
+ int socket;
};
void pcie_doe_init(PCIDevice *pdev, DOECap *doe_cap, uint16_t offset,
diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index 76fe039704..0f89988c6f 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -203,6 +203,7 @@
#include "sysemu/hostmem.h"
#include "hw/pci/msix.h"
#include "hw/pci/pcie_sriov.h"
+#include "sysemu/spdm-socket.h"
#include "migration/vmstate.h"
#include "nvme.h"
@@ -8070,6 +8071,28 @@ static int nvme_add_pm_capability(PCIDevice *pci_dev, uint8_t offset)
return 0;
}
+static bool pcie_doe_spdm_rsp(DOECap *doe_cap)
+{
+ void *req = pcie_doe_get_write_mbox_ptr(doe_cap);
+ uint32_t req_len = pcie_doe_get_obj_len(req) * 4;
+ void *rsp = doe_cap->read_mbox;
+ uint32_t rsp_len = SPDM_SOCKET_MAX_MESSAGE_BUFFER_SIZE;
+ uint32_t recvd;
+
+ recvd = spdm_socket_rsp(doe_cap->socket,
+ SPDM_SOCKET_TRANSPORT_TYPE_PCI_DOE,
+ req, req_len, rsp, rsp_len);
+ doe_cap->read_mbox_len += DIV_ROUND_UP(recvd, 4);
+
+ return recvd != 0;
+}
+
+static DOEProtocol doe_spdm_prot[] = {
+ { PCI_VENDOR_ID_PCI_SIG, PCI_SIG_DOE_CMA, pcie_doe_spdm_rsp },
+ { PCI_VENDOR_ID_PCI_SIG, PCI_SIG_DOE_SECURED_CMA, pcie_doe_spdm_rsp },
+ { }
+};
+
static bool nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
{
ERRP_GUARD();
@@ -8126,6 +8149,24 @@ static bool nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
nvme_update_msixcap_ts(pci_dev, n->conf_msix_qsize);
+ pcie_cap_deverr_init(pci_dev);
+
+ /* DOE Initialisation */
+ if (pci_dev->spdm_port) {
+ uint16_t doe_offset = n->params.sriov_max_vfs ?
+ PCI_CONFIG_SPACE_SIZE + PCI_ARI_SIZEOF
+ : PCI_CONFIG_SPACE_SIZE;
+
+ pcie_doe_init(pci_dev, &pci_dev->doe_spdm, doe_offset, doe_spdm_prot, true, 0);
+
+ pci_dev->doe_spdm.socket = spdm_socket_connect(pci_dev->spdm_port, errp);
+
+ if (pci_dev->doe_spdm.socket < 0 ) {
+ error_setg(errp, "Failed to connect to SPDM socket");
+ return -ENOTSUP;
+ }
+ }
+
if (n->params.cmb_size_mb) {
nvme_init_cmb(n, pci_dev);
}
@@ -8412,6 +8453,7 @@ static Property nvme_props[] = {
params.sriov_max_vi_per_vf, 0),
DEFINE_PROP_UINT8("sriov_max_vq_per_vf", NvmeCtrl,
params.sriov_max_vq_per_vf, 0),
+ DEFINE_PROP_UINT16("spdm", PCIDevice, spdm_port, 0),
DEFINE_PROP_END_OF_LIST(),
};
@@ -8494,10 +8536,20 @@ static void nvme_pci_write_config(PCIDevice *dev, uint32_t address,
uint32_t val, int len)
{
nvme_sriov_pre_write_ctrl(dev, address, val, len);
+ pcie_doe_write_config(&dev->doe_spdm, address, val, len);
pci_default_write_config(dev, address, val, len);
pcie_cap_flr_write_config(dev, address, val, len);
}
+static uint32_t nvme_pci_read_config(PCIDevice *dev, uint32_t address, int len)
+{
+ uint32_t val;
+ if (pcie_doe_read_config(&dev->doe_spdm, address, len, &val)) {
+ return val;
+ }
+ return pci_default_read_config(dev, address, len);
+}
+
static const VMStateDescription nvme_vmstate = {
.name = "nvme",
.unmigratable = 1,
@@ -8510,6 +8562,7 @@ static void nvme_class_init(ObjectClass *oc, void *data)
pc->realize = nvme_realize;
pc->config_write = nvme_pci_write_config;
+ pc->config_read = nvme_pci_read_config;
pc->exit = nvme_exit;
pc->class_id = PCI_CLASS_STORAGE_EXPRESS;
pc->revision = 2;
--
2.44.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v5 3/3] hw/nvme: Add SPDM over DOE support
2024-03-07 0:58 ` [PATCH v5 3/3] hw/nvme: Add SPDM over DOE support Alistair Francis
@ 2024-03-07 10:17 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 7+ messages in thread
From: Philippe Mathieu-Daudé @ 2024-03-07 10:17 UTC (permalink / raw)
To: Alistair Francis, marcel.apfelbaum, Jonathan.Cameron, its, mst,
hchkuo, wilfred.mallawa, cbrowy, kbusch, lukas, jiewen.yao,
qemu-devel
Cc: Alistair Francis, qemu-block, Paolo Bonzini, Klaus Jensen,
Markus Armbruster
Hi Alistair, Wilfred,
On 7/3/24 01:58, Alistair Francis wrote:
> From: Wilfred Mallawa <wilfred.mallawa@wdc.com>
>
> Setup Data Object Exchance (DOE) as an extended capability for the NVME
> controller and connect SPDM to it (CMA) to it.
>
> Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Acked-by: Klaus Jensen <k.jensen@samsung.com>
> ---
> docs/specs/index.rst | 1 +
> docs/specs/spdm.rst | 122 ++++++++++++++++++++++++++++++++++++
> include/hw/pci/pci_device.h | 5 ++
> include/hw/pci/pcie_doe.h | 3 +
> hw/nvme/ctrl.c | 53 ++++++++++++++++
> 5 files changed, 184 insertions(+)
> create mode 100644 docs/specs/spdm.rst
> diff --git a/include/hw/pci/pci_device.h b/include/hw/pci/pci_device.h
> index d3dd0f64b2..b8379c78f1 100644
> --- a/include/hw/pci/pci_device.h
> +++ b/include/hw/pci/pci_device.h
> @@ -3,6 +3,7 @@
>
> #include "hw/pci/pci.h"
> #include "hw/pci/pcie.h"
> +#include "hw/pci/pcie_doe.h"
>
> #define TYPE_PCI_DEVICE "pci-device"
> typedef struct PCIDeviceClass PCIDeviceClass;
> @@ -157,6 +158,10 @@ struct PCIDevice {
> MSIVectorReleaseNotifier msix_vector_release_notifier;
> MSIVectorPollNotifier msix_vector_poll_notifier;
>
> + /* DOE */
> + DOECap doe_spdm;
> + uint16_t spdm_port;
> +
> /* ID of standby device in net_failover pair */
> char *failover_pair_id;
> uint32_t acpi_index;
> diff --git a/include/hw/pci/pcie_doe.h b/include/hw/pci/pcie_doe.h
> index 15d94661f9..eb8f4e393d 100644
> --- a/include/hw/pci/pcie_doe.h
> +++ b/include/hw/pci/pcie_doe.h
> @@ -108,6 +108,9 @@ struct DOECap {
> /* Protocols and its callback response */
> DOEProtocol *protocols;
> uint16_t protocol_num;
> +
> + /* Used for spdm-socket */
> + int socket;
Why not name it 'spdm_socket' like 'spdm_port' earlier?
> };
> static bool nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
> {
> ERRP_GUARD();
> @@ -8126,6 +8149,24 @@ static bool nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
>
> nvme_update_msixcap_ts(pci_dev, n->conf_msix_qsize);
>
> + pcie_cap_deverr_init(pci_dev);
> +
> + /* DOE Initialisation */
> + if (pci_dev->spdm_port) {
> + uint16_t doe_offset = n->params.sriov_max_vfs ?
> + PCI_CONFIG_SPACE_SIZE + PCI_ARI_SIZEOF
> + : PCI_CONFIG_SPACE_SIZE;
> +
> + pcie_doe_init(pci_dev, &pci_dev->doe_spdm, doe_offset, doe_spdm_prot, true, 0);
> +
> + pci_dev->doe_spdm.socket = spdm_socket_connect(pci_dev->spdm_port, errp);
> +
> + if (pci_dev->doe_spdm.socket < 0 ) {
> + error_setg(errp, "Failed to connect to SPDM socket");
spdm_socket_connect() already sets errp in case of failure.
> + return -ENOTSUP;
This function returns a boolean, so this return value is casted
to 'true'. IIUC true means success, so this is incorrect.
> + }
> + }
> +
> if (n->params.cmb_size_mb) {
> nvme_init_cmb(n, pci_dev);
> }
> @@ -8412,6 +8453,7 @@ static Property nvme_props[] = {
> params.sriov_max_vi_per_vf, 0),
> DEFINE_PROP_UINT8("sriov_max_vq_per_vf", NvmeCtrl,
> params.sriov_max_vq_per_vf, 0),
> + DEFINE_PROP_UINT16("spdm", PCIDevice, spdm_port, 0),
> DEFINE_PROP_END_OF_LIST(),
> };
Regards,
Phil.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v5 0/3] Initial support for SPDM Responders
2024-03-07 0:58 [PATCH v5 0/3] Initial support for SPDM Responders Alistair Francis
` (2 preceding siblings ...)
2024-03-07 0:58 ` [PATCH v5 3/3] hw/nvme: Add SPDM over DOE support Alistair Francis
@ 2024-03-07 9:42 ` Jonathan Cameron via
3 siblings, 0 replies; 7+ messages in thread
From: Jonathan Cameron via @ 2024-03-07 9:42 UTC (permalink / raw)
To: Alistair Francis, marcel.apfelbaum, its, mst
Cc: hchkuo, wilfred.mallawa, cbrowy, kbusch, lukas, jiewen.yao,
qemu-devel, Alistair Francis, qemu-block, Paolo Bonzini
On Thu, 7 Mar 2024 10:58:56 +1000
Alistair Francis <alistair23@gmail.com> wrote:
> The Security Protocol and Data Model (SPDM) Specification defines
> messages, data objects, and sequences for performing message exchanges
> over a variety of transport and physical media.
> - https://www.dmtf.org/sites/default/files/standards/documents/DSP0274_1.3.0.pdf
>
> SPDM currently supports PCIe DOE and MCTP transports, but it can be
> extended to support others in the future. This series adds
> support to QEMU to connect to an external SPDM instance.
>
> SPDM support can be added to any QEMU device by exposing a
> TCP socket to a SPDM server. The server can then implement the SPDM
> decoding/encoding support, generally using libspdm [1].
>
> This is similar to how the current TPM implementation works and means
> that the heavy lifting of setting up certificate chains, capabilities,
> measurements and complex crypto can be done outside QEMU by a well
> supported and tested library.
>
> This series implements socket support and exposes SPDM for a NVMe device.
Thanks Alastair,
I'm really keen to seen this land soon as I have the CXL infrastructure
for this backed up behind it. Also will be needed for PCI (IDE) and CXL link
encryption emulation and most if not all of the confidential computing stacks
with QEMU emulating the host system + peripherals.
I believe it's just waiting for a PCI Maintainer Ack at this point? Klaus said he
was happy to take it through NVME but wanted a PCI Ack first.
Michael / Marcel, if you have time to look at it that would be great.
Thanks,
Jonathan
>
> 1: https://github.com/DMTF/libspdm
>
> v5:
> - Update MAINTAINERS
> v4:
> - Rebase
> v3:
> - Spelling fixes
> - Support for SPDM-Utils
> v2:
> - Add cover letter
> - A few code fixes based on comments
> - Document SPDM-Utils
> - A few tweaks and clarifications to the documentation
>
> Alistair Francis (1):
> hw/pci: Add all Data Object Types defined in PCIe r6.0
>
> Huai-Cheng Kuo (1):
> backends: Initial support for SPDM socket support
>
> Wilfred Mallawa (1):
> hw/nvme: Add SPDM over DOE support
>
> MAINTAINERS | 6 +
> docs/specs/index.rst | 1 +
> docs/specs/spdm.rst | 122 ++++++++++++++++++++
> include/hw/pci/pci_device.h | 5 +
> include/hw/pci/pcie_doe.h | 5 +
> include/sysemu/spdm-socket.h | 44 +++++++
> backends/spdm-socket.c | 216 +++++++++++++++++++++++++++++++++++
> hw/nvme/ctrl.c | 53 +++++++++
> backends/Kconfig | 4 +
> backends/meson.build | 2 +
> 10 files changed, 458 insertions(+)
> create mode 100644 docs/specs/spdm.rst
> create mode 100644 include/sysemu/spdm-socket.h
> create mode 100644 backends/spdm-socket.c
>
^ permalink raw reply [flat|nested] 7+ messages in thread