[PATCH-for-9.1 v2 05/11] hw/net/lan9118: Add definitions for FIFO allocated sizes

["Philippe Mathieu-Daudé" <philmd@linaro.org>]

Add definitions for the TX_FIF_SZ=5 case, per TABLE 5-3
"VALID TX/RX FIFO ALLOCATIONS".

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 hw/net/lan9118.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c
index a6a869de32..00409927fe 100644
--- a/hw/net/lan9118.c
+++ b/hw/net/lan9118.c
@@ -158,6 +158,17 @@ do { printf("lan9118: " fmt , ## __VA_ARGS__); } while (0)
  */
 #define MIL_TXFIFO_SIZE         2048
 
+/*
+ * TX and RX FIFO space is configurable through the TX FIFO Size (TX_FIF_SZ)
+ * field in the hardware configuration (CSR HW_CFG) register. These are the
+ * default configuration settings for TX_FIF_SZ = 5
+ * (see TABLE 5-3: VALID TX/RX FIFO ALLOCATIONS).
+ */
+#define TX_DATA_FIFO_BYTES      4608    /* 1152 words */
+#define TX_STATUS_FIFO_BYTES    512     /* 128 words */
+#define RX_DATA_FIFO_BYTES      10560   /* 2640 words */
+#define RX_STATUS_FIFO_BYTES    704     /* 176 words */
+
 enum tx_state {
     TX_IDLE,
     TX_B,
-- 
2.41.0