* [PATCH 0/2] Improvements for switches in hw/cpu/Kconfig @ 2024-04-12 6:20 Thomas Huth 2024-04-12 6:20 ` [PATCH 1/2] hw: Fix problem with the A*MPCORE switches in the Kconfig files Thomas Huth 2024-04-12 6:20 ` [PATCH 2/2] hw: Add a Kconfig switch for the TYPE_CPU_CLUSTER device Thomas Huth 0 siblings, 2 replies; 8+ messages in thread From: Thomas Huth @ 2024-04-12 6:20 UTC (permalink / raw) To: qemu-devel, Paolo Bonzini, Peter Maydell Cc: qemu-arm, qemu-riscv, Daniel Henrique Barboza, Liu Zhiwei, Alistair Francis, Bin Meng, Weiwei Li, Palmer Dabbelt First patch fixes the problem that the file hw/cpu/Kconfig is currently ignored and the switches there are duplicated in hw/arm/. The second patch introduces a proper config switch for the cpu-cluster device. Thomas Huth (2): hw: Fix problem with the A*MPCORE switches in the Kconfig files hw: Add a Kconfig switch for the TYPE_CPU_CLUSTER device hw/Kconfig | 1 + hw/arm/Kconfig | 18 +++--------------- hw/cpu/Kconfig | 15 ++++++++++++--- hw/cpu/meson.build | 2 +- hw/riscv/Kconfig | 2 ++ 5 files changed, 19 insertions(+), 19 deletions(-) -- 2.44.0 ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/2] hw: Fix problem with the A*MPCORE switches in the Kconfig files 2024-04-12 6:20 [PATCH 0/2] Improvements for switches in hw/cpu/Kconfig Thomas Huth @ 2024-04-12 6:20 ` Thomas Huth 2024-04-12 11:10 ` Philippe Mathieu-Daudé 2024-04-12 6:20 ` [PATCH 2/2] hw: Add a Kconfig switch for the TYPE_CPU_CLUSTER device Thomas Huth 1 sibling, 1 reply; 8+ messages in thread From: Thomas Huth @ 2024-04-12 6:20 UTC (permalink / raw) To: qemu-devel, Paolo Bonzini, Peter Maydell Cc: qemu-arm, qemu-riscv, Daniel Henrique Barboza, Liu Zhiwei, Alistair Francis, Bin Meng, Weiwei Li, Palmer Dabbelt A9MPCORE, ARM11MPCORE and A15MPCORE are defined twice, once in hw/cpu/Kconfig and once in hw/arm/Kconfig. This is only possible by accident, since hw/cpu/Kconfig is never included from hw/Kconfig. Fix it by declaring the switches only in hw/cpu/Kconfig (since the related files reside in the hw/cpu/ folder) and by making sure that the file hw/cpu/Kconfig is now properly included from hw/Kconfig. Signed-off-by: Thomas Huth <thuth@redhat.com> --- hw/Kconfig | 1 + hw/arm/Kconfig | 15 --------------- hw/cpu/Kconfig | 12 +++++++++--- 3 files changed, 10 insertions(+), 18 deletions(-) diff --git a/hw/Kconfig b/hw/Kconfig index 2c00936c28..9567cc475d 100644 --- a/hw/Kconfig +++ b/hw/Kconfig @@ -48,6 +48,7 @@ source watchdog/Kconfig # arch Kconfig source arm/Kconfig +source cpu/Kconfig source alpha/Kconfig source avr/Kconfig source cris/Kconfig diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index 893a7bff66..d97015c45c 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -678,21 +678,6 @@ config ZAURUS select NAND select ECC -config A9MPCORE - bool - select A9_GTIMER - select A9SCU # snoop control unit - select ARM_GIC - select ARM_MPTIMER - -config A15MPCORE - bool - select ARM_GIC - -config ARM11MPCORE - bool - select ARM11SCU - config ARMSSE bool select ARM_V7M diff --git a/hw/cpu/Kconfig b/hw/cpu/Kconfig index 1767d028ac..f776e884cd 100644 --- a/hw/cpu/Kconfig +++ b/hw/cpu/Kconfig @@ -1,8 +1,14 @@ -config ARM11MPCORE - bool - config A9MPCORE bool + select A9_GTIMER + select A9SCU # snoop control unit + select ARM_GIC + select ARM_MPTIMER config A15MPCORE bool + select ARM_GIC + +config ARM11MPCORE + bool + select ARM11SCU -- 2.44.0 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] hw: Fix problem with the A*MPCORE switches in the Kconfig files 2024-04-12 6:20 ` [PATCH 1/2] hw: Fix problem with the A*MPCORE switches in the Kconfig files Thomas Huth @ 2024-04-12 11:10 ` Philippe Mathieu-Daudé 2024-04-12 11:32 ` Thomas Huth 0 siblings, 1 reply; 8+ messages in thread From: Philippe Mathieu-Daudé @ 2024-04-12 11:10 UTC (permalink / raw) To: Thomas Huth, qemu-devel, Paolo Bonzini, Peter Maydell Cc: qemu-arm, qemu-riscv, Daniel Henrique Barboza, Liu Zhiwei, Alistair Francis, Bin Meng, Weiwei Li, Palmer Dabbelt On 12/4/24 08:20, Thomas Huth wrote: > A9MPCORE, ARM11MPCORE and A15MPCORE are defined twice, once in > hw/cpu/Kconfig and once in hw/arm/Kconfig. This is only possible > by accident, since hw/cpu/Kconfig is never included from hw/Kconfig. > Fix it by declaring the switches only in hw/cpu/Kconfig (since the > related files reside in the hw/cpu/ folder) and by making sure that > the file hw/cpu/Kconfig is now properly included from hw/Kconfig. > > Signed-off-by: Thomas Huth <thuth@redhat.com> > --- > hw/Kconfig | 1 + > hw/arm/Kconfig | 15 --------------- > hw/cpu/Kconfig | 12 +++++++++--- > 3 files changed, 10 insertions(+), 18 deletions(-) > > diff --git a/hw/Kconfig b/hw/Kconfig > index 2c00936c28..9567cc475d 100644 > --- a/hw/Kconfig > +++ b/hw/Kconfig > @@ -48,6 +48,7 @@ source watchdog/Kconfig > > # arch Kconfig > source arm/Kconfig > +source cpu/Kconfig > source alpha/Kconfig > source avr/Kconfig > source cris/Kconfig > diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig > index 893a7bff66..d97015c45c 100644 > --- a/hw/arm/Kconfig > +++ b/hw/arm/Kconfig > @@ -678,21 +678,6 @@ config ZAURUS > select NAND > select ECC > > -config A9MPCORE > - bool > - select A9_GTIMER > - select A9SCU # snoop control unit > - select ARM_GIC > - select ARM_MPTIMER > - > -config A15MPCORE > - bool > - select ARM_GIC > - > -config ARM11MPCORE > - bool > - select ARM11SCU > - > config ARMSSE > bool > select ARM_V7M > diff --git a/hw/cpu/Kconfig b/hw/cpu/Kconfig > index 1767d028ac..f776e884cd 100644 > --- a/hw/cpu/Kconfig > +++ b/hw/cpu/Kconfig > @@ -1,8 +1,14 @@ > -config ARM11MPCORE > - bool > - > config A9MPCORE > bool > + select A9_GTIMER > + select A9SCU # snoop control unit > + select ARM_GIC > + select ARM_MPTIMER > > config A15MPCORE > bool > + select ARM_GIC > + > +config ARM11MPCORE > + bool > + select ARM11SCU I thought https://lore.kernel.org/qemu-devel/20231212162935.42910-6-philmd@linaro.org/ was already merged :/ I'll look at what is missing and respin. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] hw: Fix problem with the A*MPCORE switches in the Kconfig files 2024-04-12 11:10 ` Philippe Mathieu-Daudé @ 2024-04-12 11:32 ` Thomas Huth 2024-04-13 9:48 ` Philippe Mathieu-Daudé 0 siblings, 1 reply; 8+ messages in thread From: Thomas Huth @ 2024-04-12 11:32 UTC (permalink / raw) To: Philippe Mathieu-Daudé, qemu-devel, Paolo Bonzini, Peter Maydell Cc: qemu-arm, qemu-riscv, Daniel Henrique Barboza, Liu Zhiwei, Alistair Francis, Bin Meng, Weiwei Li, Palmer Dabbelt On 12/04/2024 13.10, Philippe Mathieu-Daudé wrote: > On 12/4/24 08:20, Thomas Huth wrote: >> A9MPCORE, ARM11MPCORE and A15MPCORE are defined twice, once in >> hw/cpu/Kconfig and once in hw/arm/Kconfig. This is only possible >> by accident, since hw/cpu/Kconfig is never included from hw/Kconfig. >> Fix it by declaring the switches only in hw/cpu/Kconfig (since the >> related files reside in the hw/cpu/ folder) and by making sure that >> the file hw/cpu/Kconfig is now properly included from hw/Kconfig. >> >> Signed-off-by: Thomas Huth <thuth@redhat.com> >> --- >> hw/Kconfig | 1 + >> hw/arm/Kconfig | 15 --------------- >> hw/cpu/Kconfig | 12 +++++++++--- >> 3 files changed, 10 insertions(+), 18 deletions(-) >> >> diff --git a/hw/Kconfig b/hw/Kconfig >> index 2c00936c28..9567cc475d 100644 >> --- a/hw/Kconfig >> +++ b/hw/Kconfig >> @@ -48,6 +48,7 @@ source watchdog/Kconfig >> # arch Kconfig >> source arm/Kconfig >> +source cpu/Kconfig >> source alpha/Kconfig >> source avr/Kconfig >> source cris/Kconfig >> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig >> index 893a7bff66..d97015c45c 100644 >> --- a/hw/arm/Kconfig >> +++ b/hw/arm/Kconfig >> @@ -678,21 +678,6 @@ config ZAURUS >> select NAND >> select ECC >> -config A9MPCORE >> - bool >> - select A9_GTIMER >> - select A9SCU # snoop control unit >> - select ARM_GIC >> - select ARM_MPTIMER >> - >> -config A15MPCORE >> - bool >> - select ARM_GIC >> - >> -config ARM11MPCORE >> - bool >> - select ARM11SCU >> - >> config ARMSSE >> bool >> select ARM_V7M >> diff --git a/hw/cpu/Kconfig b/hw/cpu/Kconfig >> index 1767d028ac..f776e884cd 100644 >> --- a/hw/cpu/Kconfig >> +++ b/hw/cpu/Kconfig >> @@ -1,8 +1,14 @@ >> -config ARM11MPCORE >> - bool >> - >> config A9MPCORE >> bool >> + select A9_GTIMER >> + select A9SCU # snoop control unit >> + select ARM_GIC >> + select ARM_MPTIMER >> config A15MPCORE >> bool >> + select ARM_GIC >> + >> +config ARM11MPCORE >> + bool >> + select ARM11SCU > > I thought > https://lore.kernel.org/qemu-devel/20231212162935.42910-6-philmd@linaro.org/ > was already merged :/ I'll look at what is missing and respin. Oh, ok. But I'd prefer to keep the hw/cpu/Kconfig file since it will be used in the 2nd patch here, too. Thomas ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] hw: Fix problem with the A*MPCORE switches in the Kconfig files 2024-04-12 11:32 ` Thomas Huth @ 2024-04-13 9:48 ` Philippe Mathieu-Daudé 0 siblings, 0 replies; 8+ messages in thread From: Philippe Mathieu-Daudé @ 2024-04-13 9:48 UTC (permalink / raw) To: Thomas Huth, qemu-devel, Paolo Bonzini, Peter Maydell Cc: qemu-arm, qemu-riscv, Daniel Henrique Barboza, Liu Zhiwei, Alistair Francis, Bin Meng, Weiwei Li, Palmer Dabbelt On 12/4/24 13:32, Thomas Huth wrote: > On 12/04/2024 13.10, Philippe Mathieu-Daudé wrote: >> On 12/4/24 08:20, Thomas Huth wrote: >>> A9MPCORE, ARM11MPCORE and A15MPCORE are defined twice, once in >>> hw/cpu/Kconfig and once in hw/arm/Kconfig. This is only possible >>> by accident, since hw/cpu/Kconfig is never included from hw/Kconfig. >>> Fix it by declaring the switches only in hw/cpu/Kconfig (since the >>> related files reside in the hw/cpu/ folder) and by making sure that >>> the file hw/cpu/Kconfig is now properly included from hw/Kconfig. >>> >>> Signed-off-by: Thomas Huth <thuth@redhat.com> >>> --- >>> hw/Kconfig | 1 + >>> hw/arm/Kconfig | 15 --------------- >>> hw/cpu/Kconfig | 12 +++++++++--- >>> 3 files changed, 10 insertions(+), 18 deletions(-) >>> >>> diff --git a/hw/Kconfig b/hw/Kconfig >>> index 2c00936c28..9567cc475d 100644 >>> --- a/hw/Kconfig >>> +++ b/hw/Kconfig >>> @@ -48,6 +48,7 @@ source watchdog/Kconfig >>> # arch Kconfig >>> source arm/Kconfig >>> +source cpu/Kconfig >>> source alpha/Kconfig >>> source avr/Kconfig >>> source cris/Kconfig >>> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig >>> index 893a7bff66..d97015c45c 100644 >>> --- a/hw/arm/Kconfig >>> +++ b/hw/arm/Kconfig >>> @@ -678,21 +678,6 @@ config ZAURUS >>> select NAND >>> select ECC >>> -config A9MPCORE >>> - bool >>> - select A9_GTIMER >>> - select A9SCU # snoop control unit >>> - select ARM_GIC >>> - select ARM_MPTIMER >>> - >>> -config A15MPCORE >>> - bool >>> - select ARM_GIC >>> - >>> -config ARM11MPCORE >>> - bool >>> - select ARM11SCU >>> - >>> config ARMSSE >>> bool >>> select ARM_V7M >>> diff --git a/hw/cpu/Kconfig b/hw/cpu/Kconfig >>> index 1767d028ac..f776e884cd 100644 >>> --- a/hw/cpu/Kconfig >>> +++ b/hw/cpu/Kconfig >>> @@ -1,8 +1,14 @@ >>> -config ARM11MPCORE >>> - bool >>> - >>> config A9MPCORE >>> bool >>> + select A9_GTIMER >>> + select A9SCU # snoop control unit >>> + select ARM_GIC >>> + select ARM_MPTIMER >>> config A15MPCORE >>> bool >>> + select ARM_GIC >>> + >>> +config ARM11MPCORE >>> + bool >>> + select ARM11SCU >> >> I thought >> https://lore.kernel.org/qemu-devel/20231212162935.42910-6-philmd@linaro.org/ >> was already merged :/ I'll look at what is missing and respin. > > Oh, ok. But I'd prefer to keep the hw/cpu/Kconfig file since it will be > used in the 2nd patch here, too. Fine, Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/2] hw: Add a Kconfig switch for the TYPE_CPU_CLUSTER device 2024-04-12 6:20 [PATCH 0/2] Improvements for switches in hw/cpu/Kconfig Thomas Huth 2024-04-12 6:20 ` [PATCH 1/2] hw: Fix problem with the A*MPCORE switches in the Kconfig files Thomas Huth @ 2024-04-12 6:20 ` Thomas Huth 2024-04-12 9:15 ` Thomas Huth 1 sibling, 1 reply; 8+ messages in thread From: Thomas Huth @ 2024-04-12 6:20 UTC (permalink / raw) To: qemu-devel, Paolo Bonzini, Peter Maydell Cc: qemu-arm, qemu-riscv, Daniel Henrique Barboza, Liu Zhiwei, Alistair Francis, Bin Meng, Weiwei Li, Palmer Dabbelt The cpu-cluster device is only needed for some few arm and riscv machines. Let's avoid compiling and linking it if it is not really necessary. Signed-off-by: Thomas Huth <thuth@redhat.com> --- hw/arm/Kconfig | 3 +++ hw/cpu/Kconfig | 3 +++ hw/cpu/meson.build | 2 +- hw/riscv/Kconfig | 2 ++ 4 files changed, 9 insertions(+), 1 deletion(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index d97015c45c..5d4015b75a 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -485,6 +485,7 @@ config XLNX_ZYNQMP_ARM select AHCI select ARM_GIC select CADENCE + select CPU_CLUSTER select DDC select DPCD select SDHCI @@ -503,6 +504,7 @@ config XLNX_VERSAL default y depends on TCG && AARCH64 select ARM_GIC + select CPU_CLUSTER select PL011 select CADENCE select VIRTIO_MMIO @@ -688,6 +690,7 @@ config ARMSSE select CMSDK_APB_DUALTIMER select CMSDK_APB_UART select CMSDK_APB_WATCHDOG + select CPU_CLUSTER select IOTKIT_SECCTL select IOTKIT_SYSCTL select IOTKIT_SYSINFO diff --git a/hw/cpu/Kconfig b/hw/cpu/Kconfig index f776e884cd..baff478e1b 100644 --- a/hw/cpu/Kconfig +++ b/hw/cpu/Kconfig @@ -12,3 +12,6 @@ config A15MPCORE config ARM11MPCORE bool select ARM11SCU + +config CPU_CLUSTER + bool diff --git a/hw/cpu/meson.build b/hw/cpu/meson.build index 38cdcfbe57..43a34c4c6e 100644 --- a/hw/cpu/meson.build +++ b/hw/cpu/meson.build @@ -1,4 +1,4 @@ -system_ss.add(files('core.c', 'cluster.c')) +system_ss.add(when: 'CONFIG_CPU_CLUSTER', if_true: files('core.c', 'cluster.c')) system_ss.add(when: 'CONFIG_ARM11MPCORE', if_true: files('arm11mpcore.c')) system_ss.add(when: 'CONFIG_REALVIEW', if_true: files('realview_mpcore.c')) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index 5d644eb7b1..fc72ef0379 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -9,6 +9,7 @@ config IBEX config MICROCHIP_PFSOC bool select CADENCE_SDHCI + select CPU_CLUSTER select MCHP_PFSOC_DMC select MCHP_PFSOC_IOSCB select MCHP_PFSOC_MMUART @@ -68,6 +69,7 @@ config SIFIVE_E config SIFIVE_U bool select CADENCE + select CPU_CLUSTER select RISCV_ACLINT select SIFIVE_GPIO select SIFIVE_PDMA -- 2.44.0 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] hw: Add a Kconfig switch for the TYPE_CPU_CLUSTER device 2024-04-12 6:20 ` [PATCH 2/2] hw: Add a Kconfig switch for the TYPE_CPU_CLUSTER device Thomas Huth @ 2024-04-12 9:15 ` Thomas Huth 2024-04-13 9:50 ` Philippe Mathieu-Daudé 0 siblings, 1 reply; 8+ messages in thread From: Thomas Huth @ 2024-04-12 9:15 UTC (permalink / raw) To: qemu-devel, Paolo Bonzini, Peter Maydell Cc: qemu-arm, qemu-riscv, Daniel Henrique Barboza, Liu Zhiwei, Alistair Francis, Bin Meng, Weiwei Li, Palmer Dabbelt On 12/04/2024 08.20, Thomas Huth wrote: > The cpu-cluster device is only needed for some few arm and riscv > machines. Let's avoid compiling and linking it if it is not really > necessary. > > Signed-off-by: Thomas Huth <thuth@redhat.com> > --- > hw/arm/Kconfig | 3 +++ > hw/cpu/Kconfig | 3 +++ > hw/cpu/meson.build | 2 +- > hw/riscv/Kconfig | 2 ++ > 4 files changed, 9 insertions(+), 1 deletion(-) > > diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig > index d97015c45c..5d4015b75a 100644 > --- a/hw/arm/Kconfig > +++ b/hw/arm/Kconfig > @@ -485,6 +485,7 @@ config XLNX_ZYNQMP_ARM > select AHCI > select ARM_GIC > select CADENCE > + select CPU_CLUSTER > select DDC > select DPCD > select SDHCI > @@ -503,6 +504,7 @@ config XLNX_VERSAL > default y > depends on TCG && AARCH64 > select ARM_GIC > + select CPU_CLUSTER > select PL011 > select CADENCE > select VIRTIO_MMIO > @@ -688,6 +690,7 @@ config ARMSSE > select CMSDK_APB_DUALTIMER > select CMSDK_APB_UART > select CMSDK_APB_WATCHDOG > + select CPU_CLUSTER > select IOTKIT_SECCTL > select IOTKIT_SYSCTL > select IOTKIT_SYSINFO > diff --git a/hw/cpu/Kconfig b/hw/cpu/Kconfig > index f776e884cd..baff478e1b 100644 > --- a/hw/cpu/Kconfig > +++ b/hw/cpu/Kconfig > @@ -12,3 +12,6 @@ config A15MPCORE > config ARM11MPCORE > bool > select ARM11SCU > + > +config CPU_CLUSTER > + bool > diff --git a/hw/cpu/meson.build b/hw/cpu/meson.build > index 38cdcfbe57..43a34c4c6e 100644 > --- a/hw/cpu/meson.build > +++ b/hw/cpu/meson.build > @@ -1,4 +1,4 @@ > -system_ss.add(files('core.c', 'cluster.c')) > +system_ss.add(when: 'CONFIG_CPU_CLUSTER', if_true: files('core.c', 'cluster.c')) Oops, sorry, the switch should only be used for cluster.c, not for core.c. I'll change it in v2 ... Thomas ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] hw: Add a Kconfig switch for the TYPE_CPU_CLUSTER device 2024-04-12 9:15 ` Thomas Huth @ 2024-04-13 9:50 ` Philippe Mathieu-Daudé 0 siblings, 0 replies; 8+ messages in thread From: Philippe Mathieu-Daudé @ 2024-04-13 9:50 UTC (permalink / raw) To: Thomas Huth, qemu-devel, Paolo Bonzini, Peter Maydell Cc: qemu-arm, qemu-riscv, Daniel Henrique Barboza, Liu Zhiwei, Alistair Francis, Bin Meng, Weiwei Li, Palmer Dabbelt On 12/4/24 11:15, Thomas Huth wrote: > On 12/04/2024 08.20, Thomas Huth wrote: >> The cpu-cluster device is only needed for some few arm and riscv >> machines. Let's avoid compiling and linking it if it is not really >> necessary. I expect clustering become the new default for heterogeneous machines, but we are not there yet. >> Signed-off-by: Thomas Huth <thuth@redhat.com> >> --- >> hw/arm/Kconfig | 3 +++ >> hw/cpu/Kconfig | 3 +++ >> hw/cpu/meson.build | 2 +- >> hw/riscv/Kconfig | 2 ++ >> 4 files changed, 9 insertions(+), 1 deletion(-) >> diff --git a/hw/cpu/meson.build b/hw/cpu/meson.build >> index 38cdcfbe57..43a34c4c6e 100644 >> --- a/hw/cpu/meson.build >> +++ b/hw/cpu/meson.build >> @@ -1,4 +1,4 @@ >> -system_ss.add(files('core.c', 'cluster.c')) >> +system_ss.add(when: 'CONFIG_CPU_CLUSTER', if_true: files('core.c', >> 'cluster.c')) > > Oops, sorry, the switch should only be used for cluster.c, not for > core.c. I'll change it in v2 ... For v2: Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2024-04-13 9:51 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2024-04-12 6:20 [PATCH 0/2] Improvements for switches in hw/cpu/Kconfig Thomas Huth 2024-04-12 6:20 ` [PATCH 1/2] hw: Fix problem with the A*MPCORE switches in the Kconfig files Thomas Huth 2024-04-12 11:10 ` Philippe Mathieu-Daudé 2024-04-12 11:32 ` Thomas Huth 2024-04-13 9:48 ` Philippe Mathieu-Daudé 2024-04-12 6:20 ` [PATCH 2/2] hw: Add a Kconfig switch for the TYPE_CPU_CLUSTER device Thomas Huth 2024-04-12 9:15 ` Thomas Huth 2024-04-13 9:50 ` Philippe Mathieu-Daudé
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).