From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: pierrick.bouvier@linaro.org
Subject: [PATCH 7/7] target/i386: Implement TCGCPUOps for plugin register reads
Date: Mon, 15 Apr 2024 21:06:09 -0700 [thread overview]
Message-ID: <20240416040609.1313605-8-richard.henderson@linaro.org> (raw)
In-Reply-To: <20240416040609.1313605-1-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/i386/tcg/tcg-cpu.c | 72 ++++++++++++++++++++++++++++++---------
1 file changed, 56 insertions(+), 16 deletions(-)
diff --git a/target/i386/tcg/tcg-cpu.c b/target/i386/tcg/tcg-cpu.c
index cca19cd40e..2370053df2 100644
--- a/target/i386/tcg/tcg-cpu.c
+++ b/target/i386/tcg/tcg-cpu.c
@@ -22,9 +22,11 @@
#include "helper-tcg.h"
#include "qemu/accel.h"
#include "hw/core/accel-cpu.h"
-
+#include "gdbstub/helpers.h"
+#include "gdb-internal.h"
#include "tcg-cpu.h"
+
/* Frob eflags into and out of the CPU temporary format. */
static void x86_cpu_exec_enter(CPUState *cs)
@@ -61,38 +63,74 @@ static void x86_cpu_synchronize_from_tb(CPUState *cs,
}
}
-static void x86_restore_state_to_opc(CPUState *cs,
- const TranslationBlock *tb,
- const uint64_t *data)
+static uint64_t eip_from_unwind(CPUX86State *env, const TranslationBlock *tb,
+ uint64_t data0)
{
- X86CPU *cpu = X86_CPU(cs);
- CPUX86State *env = &cpu->env;
- int cc_op = data[1];
uint64_t new_pc;
if (tb_cflags(tb) & CF_PCREL) {
/*
- * data[0] in PC-relative TBs is also a linear address, i.e. an address with
- * the CS base added, because it is not guaranteed that EIP bits 12 and higher
- * stay the same across the translation block. Add the CS base back before
- * replacing the low bits, and subtract it below just like for !CF_PCREL.
+ * data[0] in PC-relative TBs is also a linear address,
+ * i.e. an address with the CS base added, because it is
+ * not guaranteed that EIP bits 12 and higher stay the
+ * same across the translation block. Add the CS base
+ * back before replacing the low bits, and subtract it
+ * below just like for !CF_PCREL.
*/
uint64_t pc = env->eip + tb->cs_base;
- new_pc = (pc & TARGET_PAGE_MASK) | data[0];
+ new_pc = (pc & TARGET_PAGE_MASK) | data0;
} else {
- new_pc = data[0];
+ new_pc = data0;
}
if (tb->flags & HF_CS64_MASK) {
- env->eip = new_pc;
- } else {
- env->eip = (uint32_t)(new_pc - tb->cs_base);
+ return new_pc;
}
+ return (uint32_t)(new_pc - tb->cs_base);
+}
+static void x86_restore_state_to_opc(CPUState *cs,
+ const TranslationBlock *tb,
+ const uint64_t *data)
+{
+ CPUX86State *env = cpu_env(cs);
+ CCOp cc_op;
+
+ env->eip = eip_from_unwind(env, tb, data[0]);
+
+ cc_op = data[1];
if (cc_op != CC_OP_DYNAMIC) {
env->cc_op = cc_op;
}
}
+static bool x86_plugin_need_unwind_for_reg(CPUState *cs, int reg)
+{
+ return reg == IDX_IP_REG || reg == IDX_FLAGS_REG;
+}
+
+static int x86_plugin_unwind_read_reg(CPUState *cs, GByteArray *buf, int reg,
+ const TranslationBlock *tb,
+ const uint64_t *data)
+{
+ CPUX86State *env = cpu_env(cs);
+ CCOp cc_op;
+
+ switch (reg) {
+ case IDX_IP_REG:
+ return gdb_get_regl(buf, eip_from_unwind(env, tb, data[0]));
+
+ case IDX_FLAGS_REG:
+ cc_op = data[1];
+ if (cc_op == CC_OP_DYNAMIC) {
+ cc_op = env->cc_op;
+ }
+ return gdb_get_reg32(buf, cpu_compute_eflags_ccop(env, cc_op));
+
+ default:
+ g_assert_not_reached();
+ }
+}
+
#ifndef CONFIG_USER_ONLY
static bool x86_debug_check_breakpoint(CPUState *cs)
{
@@ -110,6 +148,8 @@ static const TCGCPUOps x86_tcg_ops = {
.initialize = tcg_x86_init,
.synchronize_from_tb = x86_cpu_synchronize_from_tb,
.restore_state_to_opc = x86_restore_state_to_opc,
+ .plugin_need_unwind_for_reg = x86_plugin_need_unwind_for_reg,
+ .plugin_unwind_read_reg = x86_plugin_unwind_read_reg,
.cpu_exec_enter = x86_cpu_exec_enter,
.cpu_exec_exit = x86_cpu_exec_exit,
#ifdef CONFIG_USER_ONLY
--
2.34.1
next prev parent reply other threads:[~2024-04-16 4:07 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-16 4:06 [PATCH 0/7] plugins: Use unwind info for special gdb registers Richard Henderson
2024-04-16 4:06 ` [PATCH 1/7] tcg: Introduce INDEX_op_plugin_pc Richard Henderson
2024-04-18 17:53 ` Pierrick Bouvier
2024-04-16 4:06 ` [PATCH 2/7] accel/tcg: Set CPUState.plugin_ra before all plugin callbacks Richard Henderson
2024-04-18 17:54 ` Pierrick Bouvier
2024-05-31 16:46 ` Alex Bennée
2024-04-16 4:06 ` [PATCH 3/7] accel/tcg: Return the TranslationBlock from cpu_unwind_state_data Richard Henderson
2024-04-18 17:54 ` Pierrick Bouvier
2024-05-31 16:52 ` Alex Bennée
2024-04-16 4:06 ` [PATCH 4/7] plugins: Introduce TCGCPUOps callbacks for mid-tb register reads Richard Henderson
2024-04-18 17:55 ` Pierrick Bouvier
2024-04-16 4:06 ` [PATCH 5/7] target/i386: Split out gdb-internal.h Richard Henderson
2024-04-18 17:55 ` Pierrick Bouvier
2024-05-31 17:00 ` Alex Bennée
2024-04-16 4:06 ` [PATCH 6/7] target/i386: Introduce cpu_compute_eflags_ccop Richard Henderson
2024-04-18 17:56 ` Pierrick Bouvier
2024-04-16 4:06 ` Richard Henderson [this message]
2024-04-18 17:56 ` [PATCH 7/7] target/i386: Implement TCGCPUOps for plugin register reads Pierrick Bouvier
2024-04-17 0:35 ` [PATCH 0/7] plugins: Use unwind info for special gdb registers Pierrick Bouvier
2024-04-17 2:40 ` Richard Henderson
2024-04-17 15:39 ` Pierrick Bouvier
2024-04-22 16:49 ` Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240416040609.1313605-8-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=pierrick.bouvier@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).