[PATCH v3 11/16] aspeed/intc: Add AST2700 support

[Jamin Lin via <qemu-devel@nongnu.org>]

AST2700 interrupt controller(INTC) provides hardware interrupt interfaces
to interrupt of processors PSP, SSP and TSP. In INTC, each interrupt of
INT 128 to INT136 combines 32 interrupts.

Introduce a new aspeed_intc class with instance_init and realize handlers.

So far, this model only supports GICINT128 to GICINT136.
It creates 9 GICINT or-gates to connect 32 interrupts sources
from GICINT128 to GICINT136 as IRQ GPIO-OUTPUT pins.
Then, this model registers IRQ handler with its IRQ GPIO-INPUT pins which
connect to GICINT or-gates. And creates 9 GICINT IRQ GPIO-OUTPUT pins which
connect to GIC device with GIC IRQ 128 to 136.

If one interrupt source from GICINT128 to GICINT136
set irq, the OR-GATE irq callback function is called and set irq to INTC by
OR-GATE GPIO-OUTPUT pins. Then, the INTC irq callback function is called and
set irq to GIC by its GICINT IRQ GPIO-OUTPUT pins. Finally, the GIC irq
callback function is called and set irq to CPUs and
CPUs execute Interrupt Service Routine (ISR).

Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 hw/intc/aspeed_intc.c         | 269 ++++++++++++++++++++++++++++++++++
 hw/intc/meson.build           |   1 +
 hw/intc/trace-events          |   6 +
 include/hw/intc/aspeed_intc.h |  35 +++++
 4 files changed, 311 insertions(+)
 create mode 100644 hw/intc/aspeed_intc.c
 create mode 100644 include/hw/intc/aspeed_intc.h

diff --git a/hw/intc/aspeed_intc.c b/hw/intc/aspeed_intc.c
new file mode 100644
index 0000000000..df31900d56
--- /dev/null
+++ b/hw/intc/aspeed_intc.c
@@ -0,0 +1,269 @@
+/*
+ * ASPEED INTC Controller
+ *
+ * Copyright (C) 2024 ASPEED Technology Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "hw/intc/aspeed_intc.h"
+#include "hw/irq.h"
+#include "migration/vmstate.h"
+#include "qemu/bitops.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "hw/intc/arm_gicv3.h"
+#include "trace.h"
+#include "hw/registerfields.h"
+#include "qapi/error.h"
+
+/* INTC Registers */
+REG32(GICINT128_EN,         0x1000)
+REG32(GICINT128_STATUS,     0x1004)
+REG32(GICINT129_EN,         0x1100)
+REG32(GICINT129_STATUS,     0x1104)
+REG32(GICINT130_EN,         0x1200)
+REG32(GICINT130_STATUS,     0x1204)
+REG32(GICINT131_EN,         0x1300)
+REG32(GICINT131_STATUS,     0x1304)
+REG32(GICINT132_EN,         0x1400)
+REG32(GICINT132_STATUS,     0x1404)
+REG32(GICINT133_EN,         0x1500)
+REG32(GICINT133_STATUS,     0x1504)
+REG32(GICINT134_EN,         0x1600)
+REG32(GICINT134_STATUS,     0x1604)
+REG32(GICINT135_EN,         0x1700)
+REG32(GICINT135_STATUS,     0x1704)
+REG32(GICINT136_EN,         0x1800)
+REG32(GICINT136_STATUS,     0x1804)
+
+#define GICINT_EN_BASE     R_GICINT128_EN
+
+/*
+ * The address of GICINT128 to GICINT136 are from 0x1000 to 0x1804.
+ * Utilize "address & 0x0f00" to get the gicint_out index and
+ * its gic irq.
+ */
+static void aspeed_intc_update(AspeedINTCState *s, int irq, int level)
+{
+    uint32_t gicint_enable_addr = GICINT_EN_BASE + ((0x100 * irq) >> 2);
+    uint32_t gicint_status_addr = gicint_enable_addr + (0x4 >> 2);
+
+    if (s->trigger[irq]) {
+        if (!level && !s->regs[gicint_status_addr]) {
+            /* clear irq */
+            trace_aspeed_intc_update_irq(irq, 0);
+            qemu_set_irq(s->gicint_out[irq], 0);
+            s->trigger[irq] = false;
+        }
+    } else {
+        if (s->new_gicint_status[irq]) {
+            /* set irq */
+            trace_aspeed_intc_update_irq(irq, 1);
+            s->regs[gicint_status_addr] = s->new_gicint_status[irq];
+            s->new_gicint_status[irq] = 0;
+            qemu_set_irq(s->gicint_out[irq], 1);
+            s->trigger[irq] = true;
+        }
+    }
+}
+
+/*
+ * The value of irq should be 0 to ASPEED_INTC_NR_GICS.
+ * The irq 0 indicates GICINT128, irq 1 indicates GICINT129 and so on.
+ */
+static void aspeed_intc_set_irq(void *opaque, int irq, int level)
+{
+    AspeedINTCState *s = (AspeedINTCState *)opaque;
+    uint32_t gicint_enable_addr = GICINT_EN_BASE + ((0x100 * irq) >> 2);
+    uint32_t enable = s->regs[gicint_enable_addr];
+    int i;
+
+    if (irq > ASPEED_INTC_NR_GICS) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
+                      __func__, irq);
+        return;
+    }
+
+    trace_aspeed_intc_set_irq(irq, level);
+
+    for (i = 0; i < 32; i++) {
+        if (s->gicint_orgate[irq].levels[i]) {
+            if (enable & BIT(i)) {
+                s->new_gicint_status[irq] |= BIT(i);
+            }
+        }
+    }
+
+    aspeed_intc_update(s, irq, level);
+}
+
+static uint64_t aspeed_intc_read(void *opaque, hwaddr offset, unsigned int size)
+{
+    AspeedINTCState *s = ASPEED_INTC(opaque);
+    uint32_t addr = offset >> 2;
+    uint32_t value = 0;
+
+    if (addr >= ASPEED_INTC_NR_REGS) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        return 0;
+    }
+
+    switch (addr) {
+    case R_GICINT128_EN:
+    case R_GICINT129_EN:
+    case R_GICINT130_EN:
+    case R_GICINT131_EN:
+    case R_GICINT132_EN:
+    case R_GICINT133_EN:
+    case R_GICINT134_EN:
+    case R_GICINT135_EN:
+    case R_GICINT136_EN:
+    case R_GICINT128_STATUS:
+    case R_GICINT129_STATUS:
+    case R_GICINT130_STATUS:
+    case R_GICINT131_STATUS:
+    case R_GICINT132_STATUS:
+    case R_GICINT133_STATUS:
+    case R_GICINT134_STATUS:
+    case R_GICINT135_STATUS:
+    case R_GICINT136_STATUS:
+        value = s->regs[addr];
+        break;
+    default:
+        value = s->regs[addr];
+        break;
+    }
+
+    trace_aspeed_intc_read(offset, size, value);
+
+    return value;
+}
+
+static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
+                                        unsigned size)
+{
+    AspeedINTCState *s = ASPEED_INTC(opaque);
+    uint32_t irq = (offset & 0x0f00) >> 8;
+    uint32_t addr = offset >> 2;
+
+
+    if (addr >= ASPEED_INTC_NR_REGS) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        return;
+    }
+
+    trace_aspeed_intc_write(offset, size, data);
+
+    switch (addr) {
+    case R_GICINT128_EN:
+    case R_GICINT129_EN:
+    case R_GICINT130_EN:
+    case R_GICINT131_EN:
+    case R_GICINT132_EN:
+    case R_GICINT133_EN:
+    case R_GICINT134_EN:
+    case R_GICINT135_EN:
+    case R_GICINT136_EN:
+        s->regs[addr] = data;
+        break;
+    case R_GICINT128_STATUS:
+    case R_GICINT129_STATUS:
+    case R_GICINT130_STATUS:
+    case R_GICINT131_STATUS:
+    case R_GICINT132_STATUS:
+    case R_GICINT133_STATUS:
+    case R_GICINT134_STATUS:
+    case R_GICINT135_STATUS:
+    case R_GICINT136_STATUS:
+        /* clear status */
+        s->regs[addr] &= ~data;
+        if (!s->regs[addr]) {
+            aspeed_intc_update(s, irq, 0);
+        }
+        break;
+    default:
+        s->regs[addr] = data;
+        break;
+    }
+
+    return;
+}
+
+static const MemoryRegionOps aspeed_intc_ops = {
+    .read = aspeed_intc_read,
+    .write = aspeed_intc_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    }
+};
+
+static void aspeed_intc_instance_init(Object *obj)
+{
+    AspeedINTCState *s = ASPEED_INTC(obj);
+    int i;
+
+    for (i = 0; i < ASPEED_INTC_NR_GICS; i++) {
+        object_initialize_child(obj, "gic-orgate[*]", &s->gicint_orgate[i],
+                                TYPE_OR_IRQ);
+        object_property_set_int(OBJECT(&s->gicint_orgate[i]), "num-lines",
+                                32, &error_abort);
+    }
+}
+
+static void aspeed_intc_reset(DeviceState *dev)
+{
+    AspeedINTCState *s = ASPEED_INTC(dev);
+    memset(s->regs, 0, sizeof(s->regs));
+    memset(s->trigger, 0, sizeof(s->trigger));
+    memset(s->new_gicint_status, 0, sizeof(s->new_gicint_status));
+}
+
+static void aspeed_intc_realize(DeviceState *dev, Error **errp)
+{
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+    AspeedINTCState *s = ASPEED_INTC(dev);
+    int i;
+
+    memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_intc_ops, s,
+                          TYPE_ASPEED_INTC ".regs", ASPEED_INTC_NR_REGS << 2);
+
+    sysbus_init_mmio(sbd, &s->iomem);
+    qdev_init_gpio_in(dev, aspeed_intc_set_irq, ASPEED_INTC_NR_GICS);
+
+    for (i = 0; i < ASPEED_INTC_NR_GICS; i++) {
+        sysbus_init_irq(sbd, &s->gicint_out[i]);
+    }
+}
+
+static void aspeed_intc_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = aspeed_intc_realize;
+    dc->reset = aspeed_intc_reset;
+    dc->desc = "ASPEED INTC Controller";
+    dc->vmsd = NULL;
+}
+
+static const TypeInfo aspeed_intc_info = {
+    .name = TYPE_ASPEED_INTC,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_init = aspeed_intc_instance_init,
+    .instance_size = sizeof(AspeedINTCState),
+    .class_init = aspeed_intc_class_init,
+};
+
+static void aspeed_intc_register_types(void)
+{
+    type_register_static(&aspeed_intc_info);
+}
+
+type_init(aspeed_intc_register_types);
diff --git a/hw/intc/meson.build b/hw/intc/meson.build
index ed355941d1..f5c574f584 100644
--- a/hw/intc/meson.build
+++ b/hw/intc/meson.build
@@ -14,6 +14,7 @@ system_ss.add(when: 'CONFIG_ARM_GICV3_TCG', if_true: files(
 ))
 system_ss.add(when: 'CONFIG_ALLWINNER_A10_PIC', if_true: files('allwinner-a10-pic.c'))
 system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_vic.c'))
+system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_intc.c'))
 system_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_pic.c'))
 system_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210_gic.c', 'exynos4210_combiner.c'))
 system_ss.add(when: 'CONFIG_GOLDFISH_PIC', if_true: files('goldfish_pic.c'))
diff --git a/hw/intc/trace-events b/hw/intc/trace-events
index 1ef29d0256..30b9dd2a96 100644
--- a/hw/intc/trace-events
+++ b/hw/intc/trace-events
@@ -79,6 +79,12 @@ aspeed_vic_update_fiq(int flags) "Raising FIQ: %d"
 aspeed_vic_update_irq(int flags) "Raising IRQ: %d"
 aspeed_vic_read(uint64_t offset, unsigned size, uint32_t value) "From 0x%" PRIx64 " of size %u: 0x%" PRIx32
 aspeed_vic_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
+# aspeed_intc.c
+aspeed_intc_read(uint64_t offset, unsigned size, uint32_t value) "From 0x%" PRIx64 " of size %u: 0x%" PRIx32
+aspeed_intc_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
+aspeed_intc_set_irq(int irq, int level) "Set IRQ %d: %d"
+aspeed_intc_update_irq(int irq, int level) "Update IRQ: %d: %d"
+aspeed_intc_debug(uint32_t offset, uint32_t value) "Debug 0x%x: 0x%x"
 
 # arm_gic.c
 gic_enable_irq(int irq) "irq %d enabled"
diff --git a/include/hw/intc/aspeed_intc.h b/include/hw/intc/aspeed_intc.h
new file mode 100644
index 0000000000..0d2fbbda8f
--- /dev/null
+++ b/include/hw/intc/aspeed_intc.h
@@ -0,0 +1,35 @@
+/*
+ * ASPEED INTC Controller
+ *
+ * Copyright (C) 2024 ASPEED Technology Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+#ifndef ASPEED_INTC_H
+#define ASPEED_INTC_H
+
+#include "hw/sysbus.h"
+#include "qom/object.h"
+#include "hw/or-irq.h"
+
+#define TYPE_ASPEED_INTC "aspeed.intc"
+OBJECT_DECLARE_SIMPLE_TYPE(AspeedINTCState, ASPEED_INTC)
+
+#define ASPEED_INTC_NR_REGS (0x2000 >> 2)
+#define ASPEED_INTC_NR_GICS 9
+
+struct AspeedINTCState {
+    /*< private >*/
+    SysBusDevice parent_obj;
+    DeviceState *gic;
+
+    /*< public >*/
+    MemoryRegion iomem;
+    uint32_t regs[ASPEED_INTC_NR_REGS];
+    OrIRQState gicint_orgate[ASPEED_INTC_NR_GICS];
+    qemu_irq gicint_out[ASPEED_INTC_NR_GICS];
+    bool trigger[ASPEED_INTC_NR_GICS];
+    uint32_t new_gicint_status[ASPEED_INTC_NR_GICS];
+};
+
+#endif /* ASPEED_INTC_H */
-- 
2.25.1