From: Salil Mehta via <qemu-devel@nongnu.org>
To: <qemu-devel@nongnu.org>, <qemu-arm@nongnu.org>
Cc: <salil.mehta@huawei.com>, <maz@kernel.org>,
<jean-philippe@linaro.org>, <jonathan.cameron@huawei.com>,
<lpieralisi@kernel.org>, <peter.maydell@linaro.org>,
<richard.henderson@linaro.org>, <imammedo@redhat.com>,
<andrew.jones@linux.dev>, <david@redhat.com>, <philmd@linaro.org>,
<eric.auger@redhat.com>, <oliver.upton@linux.dev>,
<pbonzini@redhat.com>, <mst@redhat.com>, <will@kernel.org>,
<gshan@redhat.com>, <rafael@kernel.org>, <alex.bennee@linaro.org>,
<linux@armlinux.org.uk>, <darren@os.amperecomputing.com>,
<ilkka@os.amperecomputing.com>, <vishnu@os.amperecomputing.com>,
<karl.heubaum@oracle.com>, <miguel.luis@oracle.com>,
<salil.mehta@opnsrc.net>, <zhukeqian1@huawei.com>,
<wangxiongfeng2@huawei.com>, <wangyanan55@huawei.com>,
<jiakernel2@gmail.com>, <maobibo@loongson.cn>,
<lixianglai@loongson.cn>, <npiggin@gmail.com>,
<harshpb@linux.ibm.com>, <linuxarm@huawei.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Shaoqin Huang <shahuang@redhat.com>
Subject: [PATCH V9 1/8] accel/kvm: Extract common KVM vCPU {creation, parking} code
Date: Sun, 19 May 2024 22:06:13 +0100 [thread overview]
Message-ID: <20240519210620.228342-2-salil.mehta@huawei.com> (raw)
In-Reply-To: <20240519210620.228342-1-salil.mehta@huawei.com>
KVM vCPU creation is done once during the vCPU realization when Qemu vCPU thread
is spawned. This is common to all the architectures as of now.
Hot-unplug of vCPU results in destruction of the vCPU object in QOM but the
corresponding KVM vCPU object in the Host KVM is not destroyed as KVM doesn't
support vCPU removal. Therefore, its representative KVM vCPU object/context in
Qemu is parked.
Refactor architecture common logic so that some APIs could be reused by vCPU
Hotplug code of some architectures likes ARM, Loongson etc. Update new/old APIs
with trace events instead of DPRINTF. No functional change is intended here.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
---
accel/kvm/kvm-all.c | 64 ++++++++++++++++++++++++++++++++----------
accel/kvm/kvm-cpus.h | 14 +++++++++
accel/kvm/trace-events | 5 +++-
3 files changed, 67 insertions(+), 16 deletions(-)
diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c
index c0be9f5eed..9cd7d69bde 100644
--- a/accel/kvm/kvm-all.c
+++ b/accel/kvm/kvm-all.c
@@ -128,6 +128,7 @@ static QemuMutex kml_slots_lock;
#define kvm_slots_unlock() qemu_mutex_unlock(&kml_slots_lock)
static void kvm_slot_init_dirty_bitmap(KVMSlot *mem);
+static int kvm_get_vcpu(KVMState *s, unsigned long vcpu_id);
static inline void kvm_resample_fd_remove(int gsi)
{
@@ -340,14 +341,53 @@ err:
return ret;
}
+void kvm_park_vcpu(CPUState *cpu)
+{
+ struct KVMParkedVcpu *vcpu;
+
+ trace_kvm_park_vcpu(cpu->cpu_index, kvm_arch_vcpu_id(cpu));
+
+ vcpu = g_malloc0(sizeof(*vcpu));
+ vcpu->vcpu_id = kvm_arch_vcpu_id(cpu);
+ vcpu->kvm_fd = cpu->kvm_fd;
+ QLIST_INSERT_HEAD(&kvm_state->kvm_parked_vcpus, vcpu, node);
+}
+
+int kvm_create_vcpu(CPUState *cpu)
+{
+ unsigned long vcpu_id = kvm_arch_vcpu_id(cpu);
+ KVMState *s = kvm_state;
+ int kvm_fd;
+
+ /* check if the KVM vCPU already exist but is parked */
+ kvm_fd = kvm_get_vcpu(s, vcpu_id);
+ if (kvm_fd < 0) {
+ /* vCPU not parked: create a new KVM vCPU */
+ kvm_fd = kvm_vm_ioctl(s, KVM_CREATE_VCPU, vcpu_id);
+ if (kvm_fd < 0) {
+ error_report("KVM_CREATE_VCPU IOCTL failed for vCPU %lu", vcpu_id);
+ return kvm_fd;
+ }
+ }
+
+ trace_kvm_create_vcpu(cpu->cpu_index, vcpu_id, kvm_fd);
+
+ cpu->kvm_fd = kvm_fd;
+ cpu->kvm_state = s;
+ cpu->vcpu_dirty = true;
+ cpu->dirty_pages = 0;
+ cpu->throttle_us_per_full = 0;
+
+ return 0;
+}
+
static int do_kvm_destroy_vcpu(CPUState *cpu)
{
KVMState *s = kvm_state;
long mmap_size;
- struct KVMParkedVcpu *vcpu = NULL;
int ret = 0;
- trace_kvm_destroy_vcpu();
+ trace_kvm_destroy_vcpu(cpu->cpu_index, kvm_arch_vcpu_id(cpu));
ret = kvm_arch_destroy_vcpu(cpu);
if (ret < 0) {
@@ -373,10 +413,7 @@ static int do_kvm_destroy_vcpu(CPUState *cpu)
}
}
- vcpu = g_malloc0(sizeof(*vcpu));
- vcpu->vcpu_id = kvm_arch_vcpu_id(cpu);
- vcpu->kvm_fd = cpu->kvm_fd;
- QLIST_INSERT_HEAD(&kvm_state->kvm_parked_vcpus, vcpu, node);
+ kvm_park_vcpu(cpu);
err:
return ret;
}
@@ -397,6 +434,8 @@ static int kvm_get_vcpu(KVMState *s, unsigned long vcpu_id)
if (cpu->vcpu_id == vcpu_id) {
int kvm_fd;
+ trace_kvm_get_vcpu(vcpu_id);
+
QLIST_REMOVE(cpu, node);
kvm_fd = cpu->kvm_fd;
g_free(cpu);
@@ -404,7 +443,7 @@ static int kvm_get_vcpu(KVMState *s, unsigned long vcpu_id)
}
}
- return kvm_vm_ioctl(s, KVM_CREATE_VCPU, (void *)vcpu_id);
+ return -ENOENT;
}
int kvm_init_vcpu(CPUState *cpu, Error **errp)
@@ -415,19 +454,14 @@ int kvm_init_vcpu(CPUState *cpu, Error **errp)
trace_kvm_init_vcpu(cpu->cpu_index, kvm_arch_vcpu_id(cpu));
- ret = kvm_get_vcpu(s, kvm_arch_vcpu_id(cpu));
+ ret = kvm_create_vcpu(cpu);
if (ret < 0) {
- error_setg_errno(errp, -ret, "kvm_init_vcpu: kvm_get_vcpu failed (%lu)",
+ error_setg_errno(errp, -ret,
+ "kvm_init_vcpu: kvm_create_vcpu failed (%lu)",
kvm_arch_vcpu_id(cpu));
goto err;
}
- cpu->kvm_fd = ret;
- cpu->kvm_state = s;
- cpu->vcpu_dirty = true;
- cpu->dirty_pages = 0;
- cpu->throttle_us_per_full = 0;
-
mmap_size = kvm_ioctl(s, KVM_GET_VCPU_MMAP_SIZE, 0);
if (mmap_size < 0) {
ret = mmap_size;
diff --git a/accel/kvm/kvm-cpus.h b/accel/kvm/kvm-cpus.h
index ca40add32c..ba5bea5bca 100644
--- a/accel/kvm/kvm-cpus.h
+++ b/accel/kvm/kvm-cpus.h
@@ -22,5 +22,19 @@ bool kvm_supports_guest_debug(void);
int kvm_insert_breakpoint(CPUState *cpu, int type, vaddr addr, vaddr len);
int kvm_remove_breakpoint(CPUState *cpu, int type, vaddr addr, vaddr len);
void kvm_remove_all_breakpoints(CPUState *cpu);
+/**
+ * kvm_create_vcpu - Gets a parked KVM vCPU or creates a KVM vCPU
+ * @cpu: QOM CPUState object for which KVM vCPU has to be fetched/created.
+ *
+ * @returns: 0 when success, errno (<0) when failed.
+ */
+int kvm_create_vcpu(CPUState *cpu);
+/**
+ * kvm_park_vcpu - Park QEMU KVM vCPU context
+ * @cpu: QOM CPUState object for which QEMU KVM vCPU context has to be parked.
+ *
+ * @returns: none
+ */
+void kvm_park_vcpu(CPUState *cpu);
#endif /* KVM_CPUS_H */
diff --git a/accel/kvm/trace-events b/accel/kvm/trace-events
index 681ccb667d..96f4caf18a 100644
--- a/accel/kvm/trace-events
+++ b/accel/kvm/trace-events
@@ -9,6 +9,10 @@ kvm_device_ioctl(int fd, int type, void *arg) "dev fd %d, type 0x%x, arg %p"
kvm_failed_reg_get(uint64_t id, const char *msg) "Warning: Unable to retrieve ONEREG %" PRIu64 " from KVM: %s"
kvm_failed_reg_set(uint64_t id, const char *msg) "Warning: Unable to set ONEREG %" PRIu64 " to KVM: %s"
kvm_init_vcpu(int cpu_index, unsigned long arch_cpu_id) "index: %d id: %lu"
+kvm_create_vcpu(int cpu_index, unsigned long arch_cpu_id, int kvm_fd) "index: %d, id: %lu, kvm fd: %d"
+kvm_get_vcpu(unsigned long arch_cpu_id) "id: %lu"
+kvm_destroy_vcpu(int cpu_index, unsigned long arch_cpu_id) "index: %d id: %lu"
+kvm_park_vcpu(int cpu_index, unsigned long arch_cpu_id) "index: %d id: %lu"
kvm_irqchip_commit_routes(void) ""
kvm_irqchip_add_msi_route(char *name, int vector, int virq) "dev %s vector %d virq %d"
kvm_irqchip_update_msi_route(int virq) "Updating MSI route virq=%d"
@@ -25,7 +29,6 @@ kvm_dirty_ring_reaper(const char *s) "%s"
kvm_dirty_ring_reap(uint64_t count, int64_t t) "reaped %"PRIu64" pages (took %"PRIi64" us)"
kvm_dirty_ring_reaper_kick(const char *reason) "%s"
kvm_dirty_ring_flush(int finished) "%d"
-kvm_destroy_vcpu(void) ""
kvm_failed_get_vcpu_mmap_size(void) ""
kvm_cpu_exec(void) ""
kvm_interrupt_exit_request(void) ""
--
2.34.1
next prev parent reply other threads:[~2024-05-19 21:09 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-19 21:06 [PATCH V9 0/8] Add architecture agnostic code to support vCPU Hotplug Salil Mehta via
2024-05-19 21:06 ` Salil Mehta via [this message]
2024-05-20 8:04 ` [PATCH V9 1/8] accel/kvm: Extract common KVM vCPU {creation,parking} code Nicholas Piggin
2024-05-20 10:48 ` Salil Mehta via
2024-05-20 11:27 ` Salil Mehta via
2024-05-19 21:06 ` [PATCH V9 2/8] hw/acpi: Move CPU ctrl-dev MMIO region len macro to common header file Salil Mehta via
2024-05-19 21:06 ` [PATCH V9 3/8] hw/acpi: Update ACPI GED framework to support vCPU Hotplug Salil Mehta via
2024-05-19 21:06 ` [PATCH V9 4/8] hw/acpi: Update GED _EVT method AML with CPU scan Salil Mehta via
2024-05-19 21:06 ` [PATCH V9 5/8] hw/acpi: Update CPUs AML with cpu-(ctrl)dev change Salil Mehta via
2024-05-19 21:06 ` [PATCH V9 6/8] physmem: Add helper function to destroy CPU AddressSpace Salil Mehta via
2024-05-20 8:18 ` Nicholas Piggin
2024-05-20 10:55 ` Salil Mehta via
2024-05-22 1:28 ` Nicholas Piggin
2024-05-19 21:06 ` [PATCH V9 7/8] gdbstub: Add helper function to unregister GDB register space Salil Mehta via
2024-05-19 21:06 ` [PATCH V9 8/8] docs/specs/acpi_hw_reduced_hotplug: Add the CPU Hotplug Event Bit Salil Mehta via
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240519210620.228342-2-salil.mehta@huawei.com \
--to=qemu-devel@nongnu.org \
--cc=alex.bennee@linaro.org \
--cc=andrew.jones@linux.dev \
--cc=darren@os.amperecomputing.com \
--cc=david@redhat.com \
--cc=eric.auger@redhat.com \
--cc=gshan@redhat.com \
--cc=harshpb@linux.ibm.com \
--cc=ilkka@os.amperecomputing.com \
--cc=imammedo@redhat.com \
--cc=jean-philippe@linaro.org \
--cc=jiakernel2@gmail.com \
--cc=jonathan.cameron@huawei.com \
--cc=karl.heubaum@oracle.com \
--cc=linux@armlinux.org.uk \
--cc=linuxarm@huawei.com \
--cc=lixianglai@loongson.cn \
--cc=lpieralisi@kernel.org \
--cc=maobibo@loongson.cn \
--cc=maz@kernel.org \
--cc=miguel.luis@oracle.com \
--cc=mst@redhat.com \
--cc=npiggin@gmail.com \
--cc=oliver.upton@linux.dev \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=rafael@kernel.org \
--cc=richard.henderson@linaro.org \
--cc=salil.mehta@huawei.com \
--cc=salil.mehta@opnsrc.net \
--cc=shahuang@redhat.com \
--cc=vishnu@os.amperecomputing.com \
--cc=wangxiongfeng2@huawei.com \
--cc=wangyanan55@huawei.com \
--cc=will@kernel.org \
--cc=zhukeqian1@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).