qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Cédric Le Goater" <clg@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Alex Williamson" <alex.williamson@redhat.com>,
	"Zhenzhong Duan" <zhenzhong.duan@intel.com>,
	"Cédric Le Goater" <clg@redhat.com>
Subject: [PULL 41/47] vfio/pci: Make vfio_populate_vga() return bool
Date: Wed, 22 May 2024 11:54:36 +0200	[thread overview]
Message-ID: <20240522095442.195243-42-clg@redhat.com> (raw)
In-Reply-To: <20240522095442.195243-1-clg@redhat.com>

From: Zhenzhong Duan <zhenzhong.duan@intel.com>

This is to follow the coding standand in qapi/error.h to return bool
for bool-valued functions.

Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
 hw/vfio/pci.h |  2 +-
 hw/vfio/igd.c |  2 +-
 hw/vfio/pci.c | 11 +++++------
 3 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
index a5ac9efd4bb6d4070cac02f3eeb156d1018cd20f..7914f019d5ed563ae7b60be17033aedacaaa00ff 100644
--- a/hw/vfio/pci.h
+++ b/hw/vfio/pci.h
@@ -225,7 +225,7 @@ bool vfio_pci_host_match(PCIHostDeviceAddress *addr, const char *name);
 int vfio_pci_get_pci_hot_reset_info(VFIOPCIDevice *vdev,
                                     struct vfio_pci_hot_reset_info **info_p);
 
-int vfio_populate_vga(VFIOPCIDevice *vdev, Error **errp);
+bool vfio_populate_vga(VFIOPCIDevice *vdev, Error **errp);
 
 int vfio_pci_igd_opregion_init(VFIOPCIDevice *vdev,
                                struct vfio_region_info *info,
diff --git a/hw/vfio/igd.c b/hw/vfio/igd.c
index b31ee79c60b5e567f84f561cfb63849960648340..ffe57c5954e5d05a57a66b2a3f0cc44fef508126 100644
--- a/hw/vfio/igd.c
+++ b/hw/vfio/igd.c
@@ -478,7 +478,7 @@ void vfio_probe_igd_bar4_quirk(VFIOPCIDevice *vdev, int nr)
      * try to enable it.  Probably shouldn't be using legacy mode without VGA,
      * but also no point in us enabling VGA if disabled in hardware.
      */
-    if (!(gmch & 0x2) && !vdev->vga && vfio_populate_vga(vdev, &err)) {
+    if (!(gmch & 0x2) && !vdev->vga && !vfio_populate_vga(vdev, &err)) {
         error_reportf_err(err, VFIO_MSG_PREFIX, vdev->vbasedev.name);
         error_report("IGD device %s failed to enable VGA access, "
                      "legacy mode disabled", vdev->vbasedev.name);
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index 7f35cb8a29176840412652afe5ab31cd52a1bf06..ab8f74299eab85e224a02f45d4b506e860b514f9 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -2670,7 +2670,7 @@ static VFIODeviceOps vfio_pci_ops = {
     .vfio_load_config = vfio_pci_load_config,
 };
 
-int vfio_populate_vga(VFIOPCIDevice *vdev, Error **errp)
+bool vfio_populate_vga(VFIOPCIDevice *vdev, Error **errp)
 {
     VFIODevice *vbasedev = &vdev->vbasedev;
     struct vfio_region_info *reg_info;
@@ -2681,7 +2681,7 @@ int vfio_populate_vga(VFIOPCIDevice *vdev, Error **errp)
         error_setg_errno(errp, -ret,
                          "failed getting region info for VGA region index %d",
                          VFIO_PCI_VGA_REGION_INDEX);
-        return ret;
+        return false;
     }
 
     if (!(reg_info->flags & VFIO_REGION_INFO_FLAG_READ) ||
@@ -2691,7 +2691,7 @@ int vfio_populate_vga(VFIOPCIDevice *vdev, Error **errp)
                    (unsigned long)reg_info->flags,
                    (unsigned long)reg_info->size);
         g_free(reg_info);
-        return -EINVAL;
+        return false;
     }
 
     vdev->vga = g_new0(VFIOVGA, 1);
@@ -2735,7 +2735,7 @@ int vfio_populate_vga(VFIOPCIDevice *vdev, Error **errp)
                      &vdev->vga->region[QEMU_PCI_VGA_IO_LO].mem,
                      &vdev->vga->region[QEMU_PCI_VGA_IO_HI].mem);
 
-    return 0;
+    return true;
 }
 
 static bool vfio_populate_device(VFIOPCIDevice *vdev, Error **errp)
@@ -2798,8 +2798,7 @@ static bool vfio_populate_device(VFIOPCIDevice *vdev, Error **errp)
     g_free(reg_info);
 
     if (vdev->features & VFIO_FEATURE_ENABLE_VGA) {
-        ret = vfio_populate_vga(vdev, errp);
-        if (ret) {
+        if (!vfio_populate_vga(vdev, errp)) {
             error_append_hint(errp, "device does not support "
                               "requested feature x-vga\n");
             return false;
-- 
2.45.1



  parent reply	other threads:[~2024-05-22  9:56 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-22  9:53 [PULL 00/47] vfio queue Cédric Le Goater
2024-05-22  9:53 ` [PULL 01/47] vfio: Add Error** argument to .set_dirty_page_tracking() handler Cédric Le Goater
2024-05-22  9:53 ` [PULL 02/47] vfio: Add Error** argument to vfio_devices_dma_logging_start() Cédric Le Goater
2024-05-22  9:53 ` [PULL 03/47] migration: Extend migration_file_set_error() with Error* argument Cédric Le Goater
2024-05-22  9:53 ` [PULL 04/47] vfio/migration: Add an Error** argument to vfio_migration_set_state() Cédric Le Goater
2024-05-22  9:54 ` [PULL 05/47] vfio/migration: Add Error** argument to .vfio_save_config() handler Cédric Le Goater
2024-05-22  9:54 ` [PULL 06/47] vfio: Reverse test on vfio_get_xlat_addr() Cédric Le Goater
2024-05-22  9:54 ` [PULL 07/47] memory: Add Error** argument to memory_get_xlat_addr() Cédric Le Goater
2024-05-22  9:54 ` [PULL 08/47] vfio: Add Error** argument to .get_dirty_bitmap() handler Cédric Le Goater
2024-05-22  9:54 ` [PULL 09/47] vfio: Also trace event failures in vfio_save_complete_precopy() Cédric Le Goater
2024-05-22  9:54 ` [PULL 10/47] vfio/ap: Use g_autofree variable in vfio_ap_register_irq_notifier() Cédric Le Goater
2024-05-22  9:54 ` [PULL 11/47] vfio/ap: Make vfio_ap_register_irq_notifier() return a bool Cédric Le Goater
2024-05-22  9:54 ` [PULL 12/47] vfio/ccw: Use g_autofree variable in vfio_ccw_register_irq_notifier() Cédric Le Goater
2024-05-22  9:54 ` [PULL 13/47] vfio/ccw: Make vfio_ccw_register_irq_notifier() return a bool Cédric Le Goater
2024-05-22  9:54 ` [PULL 14/47] vfio/pci: migration: Skip config space check for Vendor Specific Information in VSC during restore/load Cédric Le Goater
2024-05-22  9:54 ` [PULL 15/47] qapi/vfio: Add VFIO migration QAPI event Cédric Le Goater
2024-05-22  9:54 ` [PULL 16/47] vfio/migration: Emit " Cédric Le Goater
2024-05-22  9:54 ` [PULL 17/47] vfio/migration: Don't emit STOP_COPY VFIO migration QAPI event twice Cédric Le Goater
2024-05-22  9:54 ` [PULL 18/47] vfio/migration: Enhance VFIO migration state tracing Cédric Le Goater
2024-05-22  9:54 ` [PULL 19/47] vfio/pci: Use g_autofree in vfio_realize Cédric Le Goater
2024-05-22  9:54 ` [PULL 20/47] vfio/pci: Use g_autofree in iommufd_cdev_get_info_iova_range() Cédric Le Goater
2024-05-22  9:54 ` [PULL 21/47] vfio: Make VFIOIOMMUClass::attach_device() and its wrapper return bool Cédric Le Goater
2024-05-22  9:54 ` [PULL 22/47] vfio: Make VFIOIOMMUClass::setup() " Cédric Le Goater
2024-05-22  9:54 ` [PULL 23/47] vfio: Make VFIOIOMMUClass::add_window() and its wrapper " Cédric Le Goater
2024-05-22  9:54 ` [PULL 24/47] vfio/container: Make vfio_connect_container() " Cédric Le Goater
2024-05-22  9:54 ` [PULL 25/47] vfio/container: Make vfio_set_iommu() " Cédric Le Goater
2024-05-22  9:54 ` [PULL 26/47] vfio/container: Make vfio_get_device() " Cédric Le Goater
2024-05-22  9:54 ` [PULL 27/47] vfio/iommufd: Make iommufd_cdev_*() " Cédric Le Goater
2024-05-22  9:54 ` [PULL 28/47] vfio/cpr: Make vfio_cpr_register_container() " Cédric Le Goater
2024-05-22  9:54 ` [PULL 29/47] backends/iommufd: Make iommufd_backend_*() " Cédric Le Goater
2024-05-22  9:54 ` [PULL 30/47] vfio/display: Fix error path in call site of ramfb_setup() Cédric Le Goater
2024-05-22  9:54 ` [PULL 31/47] vfio/display: Make vfio_display_*() return bool Cédric Le Goater
2024-05-22  9:54 ` [PULL 32/47] vfio/helpers: Use g_autofree in vfio_set_irq_signaling() Cédric Le Goater
2024-05-22  9:54 ` [PULL 33/47] vfio/helpers: Make vfio_set_irq_signaling() return bool Cédric Le Goater
2024-05-22  9:54 ` [PULL 34/47] vfio/helpers: Make vfio_device_get_name() " Cédric Le Goater
2024-05-22  9:54 ` [PULL 35/47] vfio/platform: Make vfio_populate_device() and vfio_base_device_init() " Cédric Le Goater
2024-05-22  9:54 ` [PULL 36/47] vfio/ccw: Make vfio_ccw_get_region() return a bool Cédric Le Goater
2024-05-22  9:54 ` [PULL 37/47] vfio/pci: Make vfio_intx_enable_kvm() " Cédric Le Goater
2024-05-22  9:54 ` [PULL 38/47] vfio/pci: Make vfio_pci_relocate_msix() and vfio_msix_early_setup() " Cédric Le Goater
2024-05-22  9:54 ` [PULL 39/47] vfio/pci: Make vfio_populate_device() " Cédric Le Goater
2024-05-22  9:54 ` [PULL 40/47] vfio/pci: Make vfio_intx_enable() return bool Cédric Le Goater
2024-05-22  9:54 ` Cédric Le Goater [this message]
2024-05-22  9:54 ` [PULL 42/47] vfio/pci: Make capability related functions " Cédric Le Goater
2024-05-22  9:54 ` [PULL 43/47] vfio/pci: Use g_autofree for vfio_region_info pointer Cédric Le Goater
2024-05-22  9:54 ` [PULL 44/47] vfio/pci-quirks: Make vfio_pci_igd_opregion_init() return bool Cédric Le Goater
2024-05-22  9:54 ` [PULL 45/47] vfio/pci-quirks: Make vfio_add_*_cap() " Cédric Le Goater
2024-05-22  9:54 ` [PULL 46/47] vfio: Use g_autofree in all call site of vfio_get_region_info() Cédric Le Goater
2024-05-22  9:54 ` [PULL 47/47] vfio/igd: Use g_autofree in vfio_probe_igd_bar4_quirk() Cédric Le Goater
2024-05-22 22:31 ` [PULL 00/47] vfio queue Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240522095442.195243-42-clg@redhat.com \
    --to=clg@redhat.com \
    --cc=alex.williamson@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=zhenzhong.duan@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).