From: nifan.cxl@gmail.com
To: qemu-devel@nongnu.org
Cc: jonathan.cameron@huawei.com, linux-cxl@vger.kernel.org,
gregory.price@memverge.com, ira.weiny@intel.com,
dan.j.williams@intel.com, a.manzanares@samsung.com,
dave@stgolabs.net, nmtadam.samsung@gmail.com,
nifan.cxl@gmail.com, jim.harris@samsung.com,
Jorgen.Hansen@wdc.com, wj28.lee@gmail.com, armbru@redhat.com,
mst@redhat.com, Fan Ni <fan.ni@samsung.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>
Subject: [PATCH v8 04/14] hw/cxl/cxl-mailbox-utils: Add dynamic capacity region representative and mailbox command support
Date: Thu, 23 May 2024 10:44:44 -0700 [thread overview]
Message-ID: <20240523174651.1089554-5-nifan.cxl@gmail.com> (raw)
In-Reply-To: <20240523174651.1089554-1-nifan.cxl@gmail.com>
From: Fan Ni <fan.ni@samsung.com>
Per cxl spec r3.1, add dynamic capacity (DC) region representative based on
Table 8-165 and extend the cxl type3 device definition to include DC region
information. Also, based on info in 8.2.9.9.9.1, add 'Get Dynamic Capacity
Configuration' mailbox support.
Note: we store region decode length as byte-wise length on the device, which
should be divided by 256 * MiB before being returned to the host
for "Get Dynamic Capacity Configuration" mailbox command per
specification.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
---
hw/cxl/cxl-mailbox-utils.c | 96 +++++++++++++++++++++++++++++++++++++
include/hw/cxl/cxl_device.h | 16 +++++++
2 files changed, 112 insertions(+)
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index ba1d9901df..49c7944d93 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -22,6 +22,8 @@
#define CXL_CAPACITY_MULTIPLIER (256 * MiB)
#define CXL_DC_EVENT_LOG_SIZE 8
+#define CXL_NUM_EXTENTS_SUPPORTED 512
+#define CXL_NUM_TAGS_SUPPORTED 0
/*
* How to add a new command, example. The command set FOO, with cmd BAR.
@@ -80,6 +82,8 @@ enum {
#define GET_POISON_LIST 0x0
#define INJECT_POISON 0x1
#define CLEAR_POISON 0x2
+ DCD_CONFIG = 0x48,
+ #define GET_DC_CONFIG 0x0
PHYSICAL_SWITCH = 0x51,
#define IDENTIFY_SWITCH_DEVICE 0x0
#define GET_PHYSICAL_PORT_STATE 0x1
@@ -1238,6 +1242,88 @@ static CXLRetCode cmd_media_clear_poison(const struct cxl_cmd *cmd,
return CXL_MBOX_SUCCESS;
}
+/*
+ * CXL r3.1 section 8.2.9.9.9.1: Get Dynamic Capacity Configuration
+ * (Opcode: 4800h)
+ */
+static CXLRetCode cmd_dcd_get_dyn_cap_config(const struct cxl_cmd *cmd,
+ uint8_t *payload_in,
+ size_t len_in,
+ uint8_t *payload_out,
+ size_t *len_out,
+ CXLCCI *cci)
+{
+ CXLType3Dev *ct3d = CXL_TYPE3(cci->d);
+ struct {
+ uint8_t region_cnt;
+ uint8_t start_rid;
+ } QEMU_PACKED *in = (void *)payload_in;
+ struct {
+ uint8_t num_regions;
+ uint8_t regions_returned;
+ uint8_t rsvd1[6];
+ struct {
+ uint64_t base;
+ uint64_t decode_len;
+ uint64_t region_len;
+ uint64_t block_size;
+ uint32_t dsmadhandle;
+ uint8_t flags;
+ uint8_t rsvd2[3];
+ } QEMU_PACKED records[];
+ } QEMU_PACKED *out = (void *)payload_out;
+ struct {
+ uint32_t num_extents_supported;
+ uint32_t num_extents_available;
+ uint32_t num_tags_supported;
+ uint32_t num_tags_available;
+ } QEMU_PACKED *extra_out;
+ uint16_t record_count;
+ uint16_t i;
+ uint16_t out_pl_len;
+ uint8_t start_rid;
+
+ start_rid = in->start_rid;
+ if (start_rid >= ct3d->dc.num_regions) {
+ return CXL_MBOX_INVALID_INPUT;
+ }
+
+ record_count = MIN(ct3d->dc.num_regions - in->start_rid, in->region_cnt);
+
+ out_pl_len = sizeof(*out) + record_count * sizeof(out->records[0]);
+ extra_out = (void *)(payload_out + out_pl_len);
+ out_pl_len += sizeof(*extra_out);
+ assert(out_pl_len <= CXL_MAILBOX_MAX_PAYLOAD_SIZE);
+
+ out->num_regions = ct3d->dc.num_regions;
+ out->regions_returned = record_count;
+ for (i = 0; i < record_count; i++) {
+ stq_le_p(&out->records[i].base,
+ ct3d->dc.regions[start_rid + i].base);
+ stq_le_p(&out->records[i].decode_len,
+ ct3d->dc.regions[start_rid + i].decode_len /
+ CXL_CAPACITY_MULTIPLIER);
+ stq_le_p(&out->records[i].region_len,
+ ct3d->dc.regions[start_rid + i].len);
+ stq_le_p(&out->records[i].block_size,
+ ct3d->dc.regions[start_rid + i].block_size);
+ stl_le_p(&out->records[i].dsmadhandle,
+ ct3d->dc.regions[start_rid + i].dsmadhandle);
+ out->records[i].flags = ct3d->dc.regions[start_rid + i].flags;
+ }
+ /*
+ * TODO: Assign values once extents and tags are introduced
+ * to use.
+ */
+ stl_le_p(&extra_out->num_extents_supported, CXL_NUM_EXTENTS_SUPPORTED);
+ stl_le_p(&extra_out->num_extents_available, CXL_NUM_EXTENTS_SUPPORTED);
+ stl_le_p(&extra_out->num_tags_supported, CXL_NUM_TAGS_SUPPORTED);
+ stl_le_p(&extra_out->num_tags_available, CXL_NUM_TAGS_SUPPORTED);
+
+ *len_out = out_pl_len;
+ return CXL_MBOX_SUCCESS;
+}
+
#define IMMEDIATE_CONFIG_CHANGE (1 << 1)
#define IMMEDIATE_DATA_CHANGE (1 << 2)
#define IMMEDIATE_POLICY_CHANGE (1 << 3)
@@ -1282,6 +1368,11 @@ static const struct cxl_cmd cxl_cmd_set[256][256] = {
cmd_media_clear_poison, 72, 0 },
};
+static const struct cxl_cmd cxl_cmd_set_dcd[256][256] = {
+ [DCD_CONFIG][GET_DC_CONFIG] = { "DCD_GET_DC_CONFIG",
+ cmd_dcd_get_dyn_cap_config, 2, 0 },
+};
+
static const struct cxl_cmd cxl_cmd_set_sw[256][256] = {
[INFOSTAT][IS_IDENTIFY] = { "IDENTIFY", cmd_infostat_identify, 0, 0 },
[INFOSTAT][BACKGROUND_OPERATION_STATUS] = { "BACKGROUND_OPERATION_STATUS",
@@ -1487,7 +1578,12 @@ void cxl_initialize_mailbox_swcci(CXLCCI *cci, DeviceState *intf,
void cxl_initialize_mailbox_t3(CXLCCI *cci, DeviceState *d, size_t payload_max)
{
+ CXLType3Dev *ct3d = CXL_TYPE3(d);
+
cxl_copy_cci_commands(cci, cxl_cmd_set);
+ if (ct3d->dc.num_regions) {
+ cxl_copy_cci_commands(cci, cxl_cmd_set_dcd);
+ }
cci->d = d;
/* No separation for PCI MB as protocol handled in PCI device */
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index a5f8e25020..e839370266 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -422,6 +422,17 @@ typedef struct CXLPoison {
typedef QLIST_HEAD(, CXLPoison) CXLPoisonList;
#define CXL_POISON_LIST_LIMIT 256
+#define DCD_MAX_NUM_REGION 8
+
+typedef struct CXLDCRegion {
+ uint64_t base; /* aligned to 256*MiB */
+ uint64_t decode_len; /* aligned to 256*MiB */
+ uint64_t len;
+ uint64_t block_size;
+ uint32_t dsmadhandle;
+ uint8_t flags;
+} CXLDCRegion;
+
struct CXLType3Dev {
/* Private */
PCIDevice parent_obj;
@@ -454,6 +465,11 @@ struct CXLType3Dev {
unsigned int poison_list_cnt;
bool poison_list_overflowed;
uint64_t poison_list_overflow_ts;
+
+ struct dynamic_capacity {
+ uint8_t num_regions; /* 0-8 regions */
+ CXLDCRegion regions[DCD_MAX_NUM_REGION];
+ } dc;
};
#define TYPE_CXL_TYPE3 "cxl-type3"
--
2.43.0
next prev parent reply other threads:[~2024-05-23 17:50 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-23 17:44 [PATCH v8 00/14] Enabling DCD emulation support in Qemu nifan.cxl
2024-05-23 17:44 ` [PATCH v8 01/14] hw/cxl/mailbox: change CCI cmd set structure to be a member, not a reference nifan.cxl
2024-05-23 17:44 ` [PATCH v8 02/14] hw/cxl/mailbox: interface to add CCI commands to an existing CCI nifan.cxl
2024-05-23 17:44 ` [PATCH v8 03/14] hw/cxl/cxl-mailbox-utils: Add dc_event_log_size field to output payload of identify memory device command nifan.cxl
2024-05-23 17:44 ` nifan.cxl [this message]
2024-05-23 17:44 ` [PATCH v8 05/14] include/hw/cxl/cxl_device: Rename mem_size as static_mem_size for type3 memory devices nifan.cxl
2024-05-23 17:44 ` [PATCH v8 06/14] hw/mem/cxl_type3: Add support to create DC regions to " nifan.cxl
2024-05-27 7:42 ` Zhijian Li (Fujitsu) via
2024-05-23 17:44 ` [PATCH v8 07/14] hw/mem/cxl-type3: Refactor ct3_build_cdat_entries_for_mr to take mr size instead of mr as argument nifan.cxl
2024-05-23 17:44 ` [PATCH v8 08/14] hw/mem/cxl_type3: Add host backend and address space handling for DC regions nifan.cxl
2024-06-03 12:27 ` Jonathan Cameron via
2024-06-03 15:04 ` Michael S. Tsirkin
2024-06-03 17:27 ` Jonathan Cameron via
2024-05-23 17:44 ` [PATCH v8 09/14] hw/mem/cxl_type3: Add DC extent list representative and get DC extent list mailbox support nifan.cxl
2024-05-23 17:44 ` [PATCH v8 10/14] hw/cxl/cxl-mailbox-utils: Add mailbox commands to support add/release dynamic capacity response nifan.cxl
2024-05-23 17:44 ` [PATCH v8 11/14] hw/cxl/events: Add qmp interfaces to add/release dynamic capacity extents nifan.cxl
2024-06-04 7:12 ` Markus Armbruster
2024-06-04 11:55 ` Jonathan Cameron via
2024-06-04 14:49 ` Markus Armbruster
2025-09-02 10:39 ` Alireza Sanaee via
2025-09-02 15:59 ` Ira Weiny
2025-09-04 8:44 ` Alireza Sanaee via
2024-05-23 17:44 ` [PATCH v8 12/14] hw/mem/cxl_type3: Add DPA range validation for accesses to DC regions nifan.cxl
2024-05-23 17:44 ` [PATCH v8 13/14] hw/cxl/cxl-mailbox-utils: Add superset extent release mailbox support nifan.cxl
2024-05-23 17:44 ` [PATCH v8 14/14] hw/mem/cxl_type3: Allow to release extent superset in QMP interface nifan.cxl
2024-06-03 13:51 ` [PATCH v8 00/14] Enabling DCD emulation support in Qemu Jonathan Cameron via
2025-06-25 14:22 ` Alireza Sanaee via
2025-06-26 16:39 ` Fan Ni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240523174651.1089554-5-nifan.cxl@gmail.com \
--to=nifan.cxl@gmail.com \
--cc=Jorgen.Hansen@wdc.com \
--cc=a.manzanares@samsung.com \
--cc=armbru@redhat.com \
--cc=dan.j.williams@intel.com \
--cc=dave@stgolabs.net \
--cc=fan.ni@samsung.com \
--cc=gregory.price@memverge.com \
--cc=ira.weiny@intel.com \
--cc=jim.harris@samsung.com \
--cc=jonathan.cameron@huawei.com \
--cc=linux-cxl@vger.kernel.org \
--cc=mst@redhat.com \
--cc=nmtadam.samsung@gmail.com \
--cc=qemu-devel@nongnu.org \
--cc=wj28.lee@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).