From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Alex Bennée" <alex.bennee@linaro.org>,
"Pierrick Bouvier" <pierrick.bouvier@linaro.org>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>
Subject: [PULL 19/32] core/cpu-common: initialise plugin state before thread creation
Date: Tue, 4 Jun 2024 11:55:55 +0200 [thread overview]
Message-ID: <20240604095609.12285-20-philmd@linaro.org> (raw)
In-Reply-To: <20240604095609.12285-1-philmd@linaro.org>
From: Alex Bennée <alex.bennee@linaro.org>
Originally I tried to move where vCPU thread initialisation to later
in realize. However pulling that thread (sic) got gnarly really
quickly. It turns out some steps of CPU realization need values that
can only be determined from the running vCPU thread.
However having moved enough out of the thread creation we can now
queue work before the thread starts (at least for TCG guests) and
avoid the race between vcpu_init and other vcpu states a plugin might
subscribe to.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240530194250.1801701-6-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
hw/core/cpu-common.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/hw/core/cpu-common.c b/hw/core/cpu-common.c
index 6cfc01593a..bf1a7b8892 100644
--- a/hw/core/cpu-common.c
+++ b/hw/core/cpu-common.c
@@ -222,14 +222,6 @@ static void cpu_common_realizefn(DeviceState *dev, Error **errp)
cpu_resume(cpu);
}
- /* Plugin initialization must wait until the cpu start executing code */
-#ifdef CONFIG_PLUGIN
- if (tcg_enabled()) {
- cpu->plugin_state = qemu_plugin_create_vcpu_state();
- async_run_on_cpu(cpu, qemu_plugin_vcpu_init__async, RUN_ON_CPU_NULL);
- }
-#endif
-
/* NOTE: latest generic point where the cpu is fully realized */
}
@@ -273,6 +265,18 @@ static void cpu_common_initfn(Object *obj)
QTAILQ_INIT(&cpu->watchpoints);
cpu_exec_initfn(cpu);
+
+ /*
+ * Plugin initialization must wait until the cpu start executing
+ * code, but we must queue this work before the threads are
+ * created to ensure we don't race.
+ */
+#ifdef CONFIG_PLUGIN
+ if (tcg_enabled()) {
+ cpu->plugin_state = qemu_plugin_create_vcpu_state();
+ async_run_on_cpu(cpu, qemu_plugin_vcpu_init__async, RUN_ON_CPU_NULL);
+ }
+#endif
}
static void cpu_common_finalize(Object *obj)
--
2.41.0
next prev parent reply other threads:[~2024-06-04 9:58 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-04 9:55 [PULL 00/32] Misc HW / accel patches Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 01/32] target/riscv: Remove unused 'instmap.h' header in translate.c Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 02/32] target/riscv: Restrict 'rv128' machine to TCG accelerator Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 03/32] target/riscv: Restrict riscv_cpu_do_interrupt() to sysemu Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 04/32] target/mips: Remove unused 'hw/misc/mips_itu.h' header Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 05/32] target/arm: Replace sprintf() by snprintf() Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 06/32] target/i386/kvm: Improve KVM_EXIT_NOTIFY warnings Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 07/32] disas/m68k: Replace sprintf() by snprintf() Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 08/32] disas/microblaze: " Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 09/32] util/hexdump: Remove b parameter from qemu_hexdump_line Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 10/32] util/hexdump: Remove ascii " Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 11/32] MAINTAINERS: drop usb maintainership Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 12/32] system/runstate: Remove unused 'qemu/plugin.h' header Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 13/32] accel/tcg: Move common declarations to 'internal-common.h' Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 14/32] accel/kvm: Fix two lines with hard-coded tabs Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 15/32] hw/core: expand on the alignment of CPUState Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 16/32] cpu: move Qemu[Thread|Cond] setup into common code Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 17/32] cpu-target: don't set cpu->thread_id to bogus value Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 18/32] plugins: remove special casing for cpu->realized Philippe Mathieu-Daudé
2024-06-04 9:55 ` Philippe Mathieu-Daudé [this message]
2024-06-04 9:55 ` [PULL 20/32] xen: Add xen_mr_is_memory() Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 21/32] physmem: Always pass offset + addr to xen_map_cache Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 22/32] physmem: Replace check for RAMBlock offset 0 with xen_mr_is_memory Philippe Mathieu-Daudé
2024-06-04 9:55 ` [PULL 23/32] hw/xen: Constify XenLegacyDevice::XenDevOps Philippe Mathieu-Daudé
2024-06-04 9:56 ` [PULL 24/32] hw/xen: Constify xenstore_be::XenDevOps Philippe Mathieu-Daudé
2024-06-04 9:56 ` [PULL 25/32] hw/xen: Make XenDevOps structures const Philippe Mathieu-Daudé
2024-06-04 9:56 ` [PULL 26/32] hw/xen: Register framebuffer backend via xen_backend_init() Philippe Mathieu-Daudé
2024-06-04 9:56 ` [PULL 27/32] hw/misc/debugexit: use runstate API instead of plain exit() Philippe Mathieu-Daudé
2024-06-04 9:56 ` [PULL 28/32] hw/dma/xlnx_dpdma: Read descriptor into buffer, not into pointer-to-buffer Philippe Mathieu-Daudé
2024-06-04 9:56 ` [PULL 29/32] hw/acpi: Remove the deprecated QAPI MEM_UNPLUG_ERROR event Philippe Mathieu-Daudé
2024-06-04 9:56 ` [PULL 30/32] trace: Remove deprecated 'vcpu' field from QMP trace events Philippe Mathieu-Daudé
2024-06-04 9:56 ` [PULL 31/32] qga: Remove deprecated 'blacklist' argument / config key Philippe Mathieu-Daudé
2024-06-04 9:56 ` [PULL 32/32] usb: add config options for the hub and hid devices Philippe Mathieu-Daudé
2024-06-04 21:25 ` [PULL 00/32] Misc HW / accel patches Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240604095609.12285-20-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=alex.bennee@linaro.org \
--cc=pierrick.bouvier@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).