qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Philippe Mathieu-Daudé" <philmd@linaro.org>,
	"Cédric Le Goater" <clg@redhat.com>
Subject: [PULL 16/19] hw/sd/sdcard: Only call sd_req_get_address() where address is used
Date: Mon, 24 Jun 2024 15:14:37 +0200	[thread overview]
Message-ID: <20240624131440.81111-17-philmd@linaro.org> (raw)
In-Reply-To: <20240624131440.81111-1-philmd@linaro.org>

It will be useful later to assert only ADTC commands
(Addressed point-to-point Data Transfer Commands, defined
as the 'sd_adtc' enum) extract the address value from the
command argument.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-18-philmd@linaro.org>
---
 hw/sd/sd.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index 51ab7cd003..3e4eb656e1 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -1114,7 +1114,7 @@ static sd_rsp_type_t sd_cmd_SET_BLOCK_COUNT(SDState *sd, SDRequest req)
 static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
 {
     uint16_t rca;
-    uint64_t addr = sd_req_get_address(sd, req);
+    uint64_t addr;
 
     /* CMD55 precedes an ACMD, so we are not interested in tracing it.
      * However there is no ACMD55, so we want to trace this particular case.
@@ -1239,7 +1239,7 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
             }
             sd->state = sd_sendingdata_state;
             memcpy(sd->data, sd->csd, 16);
-            sd->data_start = addr;
+            sd->data_start = sd_req_get_address(sd, req);
             sd->data_offset = 0;
             return sd_r1;
 
@@ -1263,7 +1263,7 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
             }
             sd->state = sd_sendingdata_state;
             memcpy(sd->data, sd->cid, 16);
-            sd->data_start = addr;
+            sd->data_start = sd_req_get_address(sd, req);
             sd->data_offset = 0;
             return sd_r1;
 
@@ -1339,6 +1339,7 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
 
     case 17:  /* CMD17:  READ_SINGLE_BLOCK */
     case 18:  /* CMD18:  READ_MULTIPLE_BLOCK */
+        addr = sd_req_get_address(sd, req);
         switch (sd->state) {
         case sd_transfer_state:
 
@@ -1359,6 +1360,7 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
     /* Block write commands (Class 4) */
     case 24:  /* CMD24:  WRITE_SINGLE_BLOCK */
     case 25:  /* CMD25:  WRITE_MULTIPLE_BLOCK */
+        addr = sd_req_get_address(sd, req);
         switch (sd->state) {
         case sd_transfer_state:
 
@@ -1417,7 +1419,7 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
         if (sd->size > SDSC_MAX_CAPACITY) {
             return sd_illegal;
         }
-
+        addr = sd_req_get_address(sd, req);
         switch (sd->state) {
         case sd_transfer_state:
             if (!address_in_range(sd, "SET_WRITE_PROT", addr, 1)) {
@@ -1439,7 +1441,7 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
         if (sd->size > SDSC_MAX_CAPACITY) {
             return sd_illegal;
         }
-
+        addr = sd_req_get_address(sd, req);
         switch (sd->state) {
         case sd_transfer_state:
             if (!address_in_range(sd, "CLR_WRITE_PROT", addr, 1)) {
@@ -1461,7 +1463,7 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
         if (sd->size > SDSC_MAX_CAPACITY) {
             return sd_illegal;
         }
-
+        addr = sd_req_get_address(sd, req);
         switch (sd->state) {
         case sd_transfer_state:
             if (!address_in_range(sd, "SEND_WRITE_PROT",
-- 
2.41.0



  parent reply	other threads:[~2024-06-24 13:18 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-24 13:14 [PULL 00/19] SD/MMC patches for 2024-06-24 Philippe Mathieu-Daudé
2024-06-24 13:14 ` [PULL 01/19] bswap: Add st24_be_p() to store 24 bits in big-endian order Philippe Mathieu-Daudé
2024-06-24 13:14 ` [PULL 02/19] hw/sd/sdcard: Avoid OOB in sd_read_byte() during unexpected CMD switch Philippe Mathieu-Daudé
2024-06-24 13:14 ` [PULL 03/19] hw/sd/sdcard: Correct code indentation Philippe Mathieu-Daudé
2024-06-24 13:14 ` [PULL 04/19] hw/sd/sdcard: Rewrite sd_cmd_ALL_SEND_CID using switch case (CMD2) Philippe Mathieu-Daudé
2024-06-24 13:14 ` [PULL 05/19] hw/sd/sdcard: Fix typo in SEND_OP_COND command name Philippe Mathieu-Daudé
2024-06-24 13:14 ` [PULL 06/19] hw/sd/sdcard: Use HWBLOCK_SHIFT definition instead of magic values Philippe Mathieu-Daudé
2024-06-24 13:14 ` [PULL 07/19] hw/sd/sdcard: Use registerfield CSR::CURRENT_STATE definition Philippe Mathieu-Daudé
2024-06-24 13:14 ` [PULL 08/19] hw/sd/sdcard: Use Load/Store API to fill some CID/CSD registers Philippe Mathieu-Daudé
2024-06-24 13:14 ` [PULL 09/19] hw/sd/sdcard: Remove ACMD6 handler for SPI mode Philippe Mathieu-Daudé
2024-06-24 13:14 ` [PULL 10/19] hw/sd/sdcard: Remove explicit entries for illegal commands Philippe Mathieu-Daudé
2024-06-24 13:14 ` [PULL 11/19] hw/sd/sdcard: Trace update of block count (CMD23) Philippe Mathieu-Daudé
2024-06-24 13:14 ` [PULL 12/19] hw/sd/sdcard: Have cmd_valid_while_locked() return a boolean value Philippe Mathieu-Daudé
2024-06-24 13:14 ` [PULL 13/19] hw/sd/sdcard: Factor sd_req_get_rca() method out Philippe Mathieu-Daudé
2024-06-24 13:14 ` [PULL 14/19] hw/sd/sdcard: Only call sd_req_get_rca() where RCA is used Philippe Mathieu-Daudé
2024-06-24 13:14 ` [PULL 15/19] hw/sd/sdcard: Factor sd_req_get_address() method out Philippe Mathieu-Daudé
2024-06-24 13:14 ` Philippe Mathieu-Daudé [this message]
2024-06-24 13:14 ` [PULL 17/19] hw/sd/sdcard: Add sd_invalid_mode_for_cmd to report invalid mode switch Philippe Mathieu-Daudé
2024-06-24 13:14 ` [PULL 18/19] hw/sd/sdcard: Inline BLK_READ_BLOCK / BLK_WRITE_BLOCK macros Philippe Mathieu-Daudé
2024-06-24 13:14 ` [PULL 19/19] hw/sd/sdcard: Add comments around registers and commands Philippe Mathieu-Daudé
2024-06-25  4:30 ` [PULL 00/19] SD/MMC patches for 2024-06-24 Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240624131440.81111-17-philmd@linaro.org \
    --to=philmd@linaro.org \
    --cc=clg@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).