qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Akihiko Odaki <akihiko.odaki@daynix.com>
To: "Philippe Mathieu-Daudé" <philmd@linaro.org>,
	"Michael S. Tsirkin" <mst@redhat.com>,
	"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
	"Alex Williamson" <alex.williamson@redhat.com>,
	"Cédric Le Goater" <clg@redhat.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Daniel P. Berrangé" <berrange@redhat.com>,
	"Eduardo Habkost" <eduardo@habkost.net>,
	"Sriram Yagnaraman" <sriram.yagnaraman@ericsson.com>,
	"Jason Wang" <jasowang@redhat.com>,
	"Keith Busch" <kbusch@kernel.org>,
	"Klaus Jensen" <its@irrelevant.dk>,
	"Markus Armbruster" <armbru@redhat.com>
Cc: qemu-devel@nongnu.org, qemu-block@nongnu.org,
	 Akihiko Odaki <akihiko.odaki@daynix.com>
Subject: [PATCH v10 11/12] hw/pci: Convert rom_bar into OnOffAuto
Date: Thu, 27 Jun 2024 15:08:00 +0900	[thread overview]
Message-ID: <20240627-reuse-v10-11-7ca0b8ed3d9f@daynix.com> (raw)
In-Reply-To: <20240627-reuse-v10-0-7ca0b8ed3d9f@daynix.com>

rom_bar is tristate but was defined as uint32_t so convert it into
OnOffAuto.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
---
 docs/igd-assign.txt               |  2 +-
 include/hw/pci/pci_device.h       |  2 +-
 hw/pci/pci.c                      |  4 ++--
 hw/vfio/pci-quirks.c              |  2 +-
 hw/vfio/pci.c                     | 11 +++++------
 hw/xen/xen_pt_load_rom.c          |  4 ++--
 tests/qtest/virtio-net-failover.c | 32 ++++++++++++++++----------------
 7 files changed, 28 insertions(+), 29 deletions(-)

diff --git a/docs/igd-assign.txt b/docs/igd-assign.txt
index e17bb50789ad..35c6c8e28493 100644
--- a/docs/igd-assign.txt
+++ b/docs/igd-assign.txt
@@ -35,7 +35,7 @@ IGD has two different modes for assignment using vfio-pci:
       ISA/LPC bridge device (vfio-pci-igd-lpc-bridge) on the root bus at
       PCI address 1f.0.
     * The IGD device must have a VGA ROM, either provided via the romfile
-      option or loaded automatically through vfio (standard).  rombar=0
+      option or loaded automatically through vfio (standard).  rombar=off
       will disable legacy mode support.
     * Hotplug of the IGD device is not supported.
     * The IGD device must be a SandyBridge or newer model device.
diff --git a/include/hw/pci/pci_device.h b/include/hw/pci/pci_device.h
index ca151325085d..49b341ce2e27 100644
--- a/include/hw/pci/pci_device.h
+++ b/include/hw/pci/pci_device.h
@@ -147,7 +147,7 @@ struct PCIDevice {
     uint32_t romsize;
     bool has_rom;
     MemoryRegion rom;
-    uint32_t rom_bar;
+    OnOffAuto rom_bar;
 
     /* INTx routing notifier */
     PCIINTxRoutingNotifier intx_routing_notifier;
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index 1eb6abf534ca..901f5460d774 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -71,7 +71,7 @@ static Property pci_props[] = {
     DEFINE_PROP_PCI_DEVFN("addr", PCIDevice, devfn, -1),
     DEFINE_PROP_STRING("romfile", PCIDevice, romfile),
     DEFINE_PROP_UINT32("romsize", PCIDevice, romsize, UINT32_MAX),
-    DEFINE_PROP_UINT32("rombar",  PCIDevice, rom_bar, 1),
+    DEFINE_PROP_ON_OFF_AUTO("rombar",  PCIDevice, rom_bar, ON_OFF_AUTO_AUTO),
     DEFINE_PROP_BIT("multifunction", PCIDevice, cap_present,
                     QEMU_PCI_CAP_MULTIFUNCTION_BITNR, false),
     DEFINE_PROP_BIT("x-pcie-lnksta-dllla", PCIDevice, cap_present,
@@ -2334,7 +2334,7 @@ static void pci_add_option_rom(PCIDevice *pdev, bool is_default_rom,
         return;
     }
 
-    if (!pdev->rom_bar) {
+    if (pdev->rom_bar == ON_OFF_AUTO_OFF) {
         /*
          * Load rom via fw_cfg instead of creating a rom bar,
          * for 0.11 compatibility.
diff --git a/hw/vfio/pci-quirks.c b/hw/vfio/pci-quirks.c
index 39dae72497e0..0e920ed0691a 100644
--- a/hw/vfio/pci-quirks.c
+++ b/hw/vfio/pci-quirks.c
@@ -33,7 +33,7 @@
  * execution as noticed with the BCM 57810 card for lack of a
  * more better way to handle such issues.
  * The  user can still override by specifying a romfile or
- * rombar=1.
+ * rombar=on.
  * Please see https://bugs.launchpad.net/qemu/+bug/1284874
  * for an analysis of the 57810 card hang. When adding
  * a new vendor id/device id combination below, please also add
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index 74a79bdf61f9..4c4d9dc81efb 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -902,7 +902,7 @@ static void vfio_pci_load_rom(VFIOPCIDevice *vdev)
         error_report("vfio-pci: Cannot read device rom at "
                     "%s", vdev->vbasedev.name);
         error_printf("Device option ROM contents are probably invalid "
-                    "(check dmesg).\nSkip option ROM probe with rombar=0, "
+                    "(check dmesg).\nSkip option ROM probe with rombar=off, "
                     "or load from file with romfile=\n");
         return;
     }
@@ -1012,11 +1012,10 @@ static void vfio_pci_size_rom(VFIOPCIDevice *vdev)
 {
     uint32_t orig, size = cpu_to_le32((uint32_t)PCI_ROM_ADDRESS_MASK);
     off_t offset = vdev->config_offset + PCI_ROM_ADDRESS;
-    DeviceState *dev = DEVICE(vdev);
     char *name;
     int fd = vdev->vbasedev.fd;
 
-    if (vdev->pdev.romfile || !vdev->pdev.rom_bar) {
+    if (vdev->pdev.romfile || vdev->pdev.rom_bar == ON_OFF_AUTO_OFF) {
         /* Since pci handles romfile, just print a message and return */
         if (vfio_opt_rom_in_denylist(vdev) && vdev->pdev.romfile) {
             warn_report("Device at %s is known to cause system instability"
@@ -1046,17 +1045,17 @@ static void vfio_pci_size_rom(VFIOPCIDevice *vdev)
     }
 
     if (vfio_opt_rom_in_denylist(vdev)) {
-        if (dev->opts && qdict_haskey(dev->opts, "rombar")) {
+        if (vdev->pdev.rom_bar == ON_OFF_AUTO_ON) {
             warn_report("Device at %s is known to cause system instability"
                         " issues during option rom execution",
                         vdev->vbasedev.name);
             error_printf("Proceeding anyway since user specified"
-                         " non zero value for rombar\n");
+                         " on for rombar\n");
         } else {
             warn_report("Rom loading for device at %s has been disabled"
                         " due to system instability issues",
                         vdev->vbasedev.name);
-            error_printf("Specify rombar=1 or romfile to force\n");
+            error_printf("Specify rombar=on or romfile to force\n");
             return;
         }
     }
diff --git a/hw/xen/xen_pt_load_rom.c b/hw/xen/xen_pt_load_rom.c
index 6bc64acd3352..025a6b25a916 100644
--- a/hw/xen/xen_pt_load_rom.c
+++ b/hw/xen/xen_pt_load_rom.c
@@ -26,7 +26,7 @@ void *pci_assign_dev_load_option_rom(PCIDevice *dev,
     Object *owner = OBJECT(dev);
 
     /* If loading ROM from file, pci handles it */
-    if (dev->romfile || !dev->rom_bar) {
+    if (dev->romfile || dev->rom_bar == ON_OFF_AUTO_OFF) {
         return NULL;
     }
 
@@ -71,7 +71,7 @@ void *pci_assign_dev_load_option_rom(PCIDevice *dev,
     if (!fread(ptr, 1, st.st_size, fp)) {
         error_report("pci-assign: Cannot read from host %s", rom_file);
         error_printf("Device option ROM contents are probably invalid "
-                     "(check dmesg).\nSkip option ROM probe with rombar=0, "
+                     "(check dmesg).\nSkip option ROM probe with rombar=off, "
                      "or load from file with romfile=\n");
         goto close_rom;
     }
diff --git a/tests/qtest/virtio-net-failover.c b/tests/qtest/virtio-net-failover.c
index 73dfabc2728b..f65b97683fb6 100644
--- a/tests/qtest/virtio-net-failover.c
+++ b/tests/qtest/virtio-net-failover.c
@@ -568,7 +568,7 @@ static void test_hotplug_2_reverse(void)
                          "{'bus': 'root0',"
                          "'failover': true,"
                          "'netdev': 'hs0',"
-                         "'rombar': 0,"
+                         "'rombar': 'off',"
                          "'romfile': '',"
                          "'mac': '"MAC_STANDBY0"'}");
 
@@ -655,7 +655,7 @@ static void test_migrate_out(gconstpointer opaque)
                          "{'bus': 'root1',"
                          "'failover_pair_id': 'standby0',"
                          "'netdev': 'hs1',"
-                         "'rombar': 0,"
+                         "'rombar': 'off',"
                          "'romfile': '',"
                          "'mac': '"MAC_PRIMARY0"'}");
 
@@ -765,7 +765,7 @@ static void test_migrate_in(gconstpointer opaque)
                          "{'bus': 'root1',"
                          "'failover_pair_id': 'standby0',"
                          "'netdev': 'hs1',"
-                         "'rombar': 0,"
+                         "'rombar': 'off',"
                          "'romfile': '',"
                          "'mac': '"MAC_PRIMARY0"'}");
 
@@ -819,7 +819,7 @@ static void test_off_migrate_out(gconstpointer opaque)
                          "{'bus': 'root1',"
                          "'failover_pair_id': 'standby0',"
                          "'netdev': 'hs1',"
-                         "'rombar': 0,"
+                         "'rombar': 'off',"
                          "'romfile': '',"
                          "'mac': '"MAC_PRIMARY0"'}");
 
@@ -887,7 +887,7 @@ static void test_off_migrate_in(gconstpointer opaque)
                          "{'bus': 'root1',"
                          "'failover_pair_id': 'standby0',"
                          "'netdev': 'hs1',"
-                         "'rombar': 0,"
+                         "'rombar': 'off',"
                          "'romfile': '',"
                          "'mac': '"MAC_PRIMARY0"'}");
 
@@ -938,7 +938,7 @@ static void test_guest_off_migrate_out(gconstpointer opaque)
                          "{'bus': 'root1',"
                          "'failover_pair_id': 'standby0',"
                          "'netdev': 'hs1',"
-                         "'rombar': 0,"
+                         "'rombar': 'off',"
                          "'romfile': '',"
                          "'mac': '"MAC_PRIMARY0"'}");
 
@@ -1014,7 +1014,7 @@ static void test_guest_off_migrate_in(gconstpointer opaque)
                          "{'bus': 'root1',"
                          "'failover_pair_id': 'standby0',"
                          "'netdev': 'hs1',"
-                         "'rombar': 0,"
+                         "'rombar': 'off',"
                          "'romfile': '',"
                          "'mac': '"MAC_PRIMARY0"'}");
 
@@ -1065,7 +1065,7 @@ static void test_migrate_guest_off_abort(gconstpointer opaque)
                          "{'bus': 'root1',"
                          "'failover_pair_id': 'standby0',"
                          "'netdev': 'hs1',"
-                         "'rombar': 0,"
+                         "'rombar': 'off',"
                          "'romfile': '',"
                          "'mac': '"MAC_PRIMARY0"'}");
 
@@ -1170,7 +1170,7 @@ static void test_migrate_abort_wait_unplug(gconstpointer opaque)
                          "{'bus': 'root1',"
                          "'failover_pair_id': 'standby0',"
                          "'netdev': 'hs1',"
-                         "'rombar': 0,"
+                         "'rombar': 'off',"
                          "'romfile': '',"
                          "'mac': '"MAC_PRIMARY0"'}");
 
@@ -1259,7 +1259,7 @@ static void test_migrate_abort_active(gconstpointer opaque)
                          "{'bus': 'root1',"
                          "'failover_pair_id': 'standby0',"
                          "'netdev': 'hs1',"
-                         "'rombar': 0,"
+                         "'rombar': 'off',"
                          "'romfile': '',"
                          "'mac': '"MAC_PRIMARY0"'}");
 
@@ -1358,7 +1358,7 @@ static void test_migrate_off_abort(gconstpointer opaque)
                          "{'bus': 'root1',"
                          "'failover_pair_id': 'standby0',"
                          "'netdev': 'hs1',"
-                         "'rombar': 0,"
+                         "'rombar': 'off',"
                          "'romfile': '',"
                          "'mac': '"MAC_PRIMARY0"'}");
 
@@ -1450,7 +1450,7 @@ static void test_migrate_abort_timeout(gconstpointer opaque)
                          "{'bus': 'root1',"
                          "'failover_pair_id': 'standby0',"
                          "'netdev': 'hs1',"
-                         "'rombar': 0,"
+                         "'rombar': 'off',"
                          "'romfile': '',"
                          "'mac': '"MAC_PRIMARY0"'}");
 
@@ -1543,7 +1543,7 @@ static void test_multi_out(gconstpointer opaque)
                          "{'bus': 'root1',"
                          "'failover_pair_id': 'standby0',"
                          "'netdev': 'hs1',"
-                         "'rombar': 0,"
+                         "'rombar': 'off',"
                          "'romfile': '',"
                          "'mac': '"MAC_PRIMARY0"'}");
 
@@ -1574,7 +1574,7 @@ static void test_multi_out(gconstpointer opaque)
                          "{'bus': 'root3',"
                          "'failover_pair_id': 'standby1',"
                          "'netdev': 'hs3',"
-                         "'rombar': 0,"
+                         "'rombar': 'off',"
                          "'romfile': '',"
                          "'mac': '"MAC_PRIMARY1"'}");
 
@@ -1713,7 +1713,7 @@ static void test_multi_in(gconstpointer opaque)
                          "{'bus': 'root1',"
                          "'failover_pair_id': 'standby0',"
                          "'netdev': 'hs1',"
-                         "'rombar': 0,"
+                         "'rombar': 'off',"
                          "'romfile': '',"
                          "'mac': '"MAC_PRIMARY0"'}");
 
@@ -1737,7 +1737,7 @@ static void test_multi_in(gconstpointer opaque)
                          "{'bus': 'root3',"
                          "'failover_pair_id': 'standby1',"
                          "'netdev': 'hs3',"
-                         "'rombar': 0,"
+                         "'rombar': 'off',"
                          "'romfile': '',"
                          "'mac': '"MAC_PRIMARY1"'}");
 

-- 
2.45.2



  parent reply	other threads:[~2024-06-27  6:10 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-27  6:07 [PATCH v10 00/12] hw/pci: SR-IOV related fixes and improvements Akihiko Odaki
2024-06-27  6:07 ` [PATCH v10 01/12] hw/pci: Rename has_power to enabled Akihiko Odaki
2024-06-27  6:07 ` [PATCH v10 02/12] hw/ppc/spapr_pci: Do not create DT for disabled PCI device Akihiko Odaki
2024-06-27  6:07 ` [PATCH v10 03/12] hw/ppc/spapr_pci: Do not reject VFs created after a PF Akihiko Odaki
2024-06-27  6:07 ` [PATCH v10 04/12] pcie_sriov: Do not manually unrealize Akihiko Odaki
2024-06-27  6:07 ` [PATCH v10 05/12] pcie_sriov: Ensure VF function number does not overflow Akihiko Odaki
2024-06-27  6:07 ` [PATCH v10 06/12] pcie_sriov: Reuse SR-IOV VF device instances Akihiko Odaki
2024-07-10  6:37   ` Cédric Le Goater
2024-07-10 10:52     ` Michael S. Tsirkin
2024-07-13 12:45       ` Akihiko Odaki
2024-07-20 19:11         ` Michael S. Tsirkin
2024-06-27  6:07 ` [PATCH v10 07/12] pcie_sriov: Release VFs failed to realize Akihiko Odaki
2024-06-27  6:07 ` [PATCH v10 08/12] pcie_sriov: Remove num_vfs from PCIESriovPF Akihiko Odaki
2024-06-27  6:07 ` [PATCH v10 09/12] pcie_sriov: Register VFs after migration Akihiko Odaki
2024-06-27  6:07 ` [PATCH v10 10/12] hw/pci: Replace -1 with UINT32_MAX for romsize Akihiko Odaki
2024-06-27  6:08 ` Akihiko Odaki [this message]
2024-07-02 13:58   ` [PATCH v10 11/12] hw/pci: Convert rom_bar into OnOffAuto Michael S. Tsirkin
2024-07-03  2:15     ` BALATON Zoltan
2024-07-03  6:00       ` Michael S. Tsirkin
2024-07-03 11:00         ` BALATON Zoltan
2024-07-03 13:35           ` Michael S. Tsirkin
2024-07-03 14:56           ` Alex Williamson
2024-06-27  6:08 ` [PATCH v10 12/12] hw/qdev: Remove opts member Akihiko Odaki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240627-reuse-v10-11-7ca0b8ed3d9f@daynix.com \
    --to=akihiko.odaki@daynix.com \
    --cc=alex.williamson@redhat.com \
    --cc=armbru@redhat.com \
    --cc=berrange@redhat.com \
    --cc=clg@redhat.com \
    --cc=eduardo@habkost.net \
    --cc=its@irrelevant.dk \
    --cc=jasowang@redhat.com \
    --cc=kbusch@kernel.org \
    --cc=marcel.apfelbaum@gmail.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=philmd@linaro.org \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=sriram.yagnaraman@ericsson.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).