From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
qemu-block@nongnu.org, "Luc Michel" <luc.michel@amd.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Daniel P . Berrangé" <berrange@redhat.com>,
"Bin Meng" <bmeng.cn@gmail.com>,
"Eduardo Habkost" <eduardo@habkost.net>,
"Cédric Le Goater" <clg@kaod.org>,
"Yanan Wang" <wangyanan55@huawei.com>
Subject: [PATCH v44 2/3] hw/sd/sdcard: Do not store vendor data on block drive (CMD56)
Date: Wed, 3 Jul 2024 10:51:47 +0200 [thread overview]
Message-ID: <20240703085148.66188-3-philmd@linaro.org> (raw)
In-Reply-To: <20240703085148.66188-1-philmd@linaro.org>
"General command" (GEN_CMD, CMD56) is described as:
GEN_CMD is the same as the single block read or write
commands (CMD24 or CMD17). The difference is that [...]
the data block is not a memory payload data but has a
vendor specific format and meaning.
Thus this block must not be stored overwriting data block
on underlying storage drive. Keep it in a dedicated
'vendor_data[]' array.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
v43: Do not re-use VMSTATE_UNUSED_V (danpb)
v44: Use subsection (Luc)
---
hw/sd/sd.c | 26 +++++++++++++++++++-------
1 file changed, 19 insertions(+), 7 deletions(-)
diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index 808dc1cea6..000b923c73 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -153,6 +153,8 @@ struct SDState {
uint32_t data_offset;
size_t data_size;
uint8_t data[512];
+ uint8_t vendor_data[512];
+
qemu_irq readonly_cb;
qemu_irq inserted_cb;
QEMUTimer *ocr_power_timer;
@@ -719,6 +721,7 @@ static void sd_reset(DeviceState *dev)
sd->wp_switch = sd->blk ? !blk_is_writable(sd->blk) : false;
sd->wp_group_bits = sect;
sd->wp_group_bmap = bitmap_new(sd->wp_group_bits);
+ memset(sd->vendor_data, 0xec, sizeof(sd->vendor_data));
memset(sd->function_group, 0, sizeof(sd->function_group));
sd->erase_start = INVALID_ADDRESS;
sd->erase_end = INVALID_ADDRESS;
@@ -793,6 +796,16 @@ static const VMStateDescription sd_ocr_vmstate = {
},
};
+static const VMStateDescription sd_vendordata_vmstate = {
+ .name = "sd-card/vendor_data-state",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (const VMStateField[]) {
+ VMSTATE_UINT8_ARRAY(vendor_data, SDState, 512),
+ VMSTATE_END_OF_LIST()
+ },
+};
+
static int sd_vmstate_pre_load(void *opaque)
{
SDState *sd = opaque;
@@ -840,6 +853,7 @@ static const VMStateDescription sd_vmstate = {
},
.subsections = (const VMStateDescription * const []) {
&sd_ocr_vmstate,
+ &sd_vendordata_vmstate,
NULL
},
};
@@ -2187,9 +2201,8 @@ void sd_write_byte(SDState *sd, uint8_t value)
break;
case 56: /* CMD56: GEN_CMD */
- sd->data[sd->data_offset ++] = value;
- if (sd->data_offset >= sd->blk_len) {
- APP_WRITE_BLOCK(sd->data_start, sd->data_offset);
+ sd->vendor_data[sd->data_offset++] = value;
+ if (sd->data_offset >= sizeof(sd->vendor_data)) {
sd->state = sd_transfer_state;
}
break;
@@ -2261,12 +2274,11 @@ uint8_t sd_read_byte(SDState *sd)
break;
case 56: /* CMD56: GEN_CMD */
- if (sd->data_offset == 0)
- APP_READ_BLOCK(sd->data_start, sd->blk_len);
- ret = sd->data[sd->data_offset ++];
+ ret = sd->vendor_data[sd->data_offset++];
- if (sd->data_offset >= sd->blk_len)
+ if (sd->data_offset >= sizeof(sd->vendor_data)) {
sd->state = sd_transfer_state;
+ }
break;
default:
--
2.41.0
next prev parent reply other threads:[~2024-07-03 8:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-03 8:51 [PATCH v44 0/3] hw/sd/sdcard: Cleanups before adding eMMC support Philippe Mathieu-Daudé
2024-07-03 8:51 ` [PATCH v44 1/3] hw/sd/sdcard: Use spec v3.01 by default Philippe Mathieu-Daudé
2024-07-03 8:51 ` Philippe Mathieu-Daudé [this message]
2024-07-03 8:57 ` [PATCH v44 2/3] hw/sd/sdcard: Do not store vendor data on block drive (CMD56) Philippe Mathieu-Daudé
2024-07-03 8:51 ` [PATCH v44 3/3] hw/sd/sdcard: Remove leftover comment about removed 'spi' Property Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240703085148.66188-3-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=berrange@redhat.com \
--cc=bmeng.cn@gmail.com \
--cc=clg@kaod.org \
--cc=eduardo@habkost.net \
--cc=luc.michel@amd.com \
--cc=marcel.apfelbaum@gmail.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=wangyanan55@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).