From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org, "Peter Maydell" <peter.maydell@linaro.org>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
qemu-block@nongnu.org, "Cédric Le Goater" <clg@kaod.org>,
"Bin Meng" <bmeng.cn@gmail.com>, "Joel Stanley" <joel@jms.id.au>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Jamin Lin" <jamin_lin@aspeedtech.com>,
"Steven Lee" <steven_lee@aspeedtech.com>,
"Troy Lee" <leetroy@gmail.com>
Subject: [PATCH v47 12/19] hw/sd/sdcard: Simplify EXT_CSD values for spec v4.3
Date: Tue, 9 Jul 2024 17:25:49 +0200 [thread overview]
Message-ID: <20240709152556.52896-13-philmd@linaro.org> (raw)
In-Reply-To: <20240709152556.52896-1-philmd@linaro.org>
- Set some keys to not defined / implemented:
. EXT_CSD_HPI_FEATURES
. EXT_CSD_BKOPS_SUPPORT
. EXT_CSD_SEC_FEATURE_SUPPORT
. EXT_CSD_ERASE_TIMEOUT_MULT
. EXT_CSD_PART_SWITCH_TIME
. EXT_CSD_OUT_OF_INTERRUPT_TIME
- Simplify:
. EXT_CSD_ACC_SIZE (6 -> 1)
16KB of super_page_size -> 512B (BDRV_SECTOR_SIZE)
. EXT_CSD_HC_ERASE_GRP_SIZE (4 -> 1)
. EXT_CSD_HC_WP_GRP_SIZE (4 -> 1)
. EXT_CSD_S_C_VCC[Q] (8 -> 1)
. EXT_CSD_S_A_TIMEOUT (17 -> 1)
. EXT_CSD_CARD_TYPE (7 -> 3)
Dual data rate -> High-Speed mode
- Update:
. EXT_CSD_CARD_TYPE (7 -> 3)
High-Speed MultiMediaCard @ 26MHz & 52MHz
. Performances (0xa -> 0x46)
Class B at 3MB/s. -> Class J at 21MB/s
. EXT_CSD_REV (5 -> 3)
Rev 1.5 (spec v4.41) -> Rev 1.3 (spec v4.3)
- Use load/store API to set EXT_CSD_SEC_CNT
- Remove R/W keys, normally zeroed at reset
. EXT_CSD_BOOT_INFO
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
hw/sd/sd.c | 50 ++++++++++++++++++--------------------------------
1 file changed, 18 insertions(+), 32 deletions(-)
diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index df0e2345c0..2a687977d1 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -484,43 +484,29 @@ static void mmc_set_ext_csd(SDState *sd, uint64_t size)
memset(sd->ext_csd, 0, sizeof(sd->ext_csd));
+ /* Properties segment (RO) */
sd->ext_csd[EXT_CSD_S_CMD_SET] = 0b1; /* supported command sets */
- sd->ext_csd[EXT_CSD_HPI_FEATURES] = 0x3; /* HPI features */
- sd->ext_csd[EXT_CSD_BKOPS_SUPPORT] = 0x1; /* Background operations */
- sd->ext_csd[241] = 0xA; /* 1st initialization time after partitioning */
- sd->ext_csd[EXT_CSD_TRIM_MULT] = 0x1; /* Trim multiplier */
- sd->ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT] = 0x15; /* Secure feature */
- sd->ext_csd[EXT_CSD_BOOT_INFO] = 0x7; /* Boot information */
+ sd->ext_csd[EXT_CSD_BOOT_INFO] = 0x0; /* Boot information */
/* Boot partition size. 128KB unit */
sd->ext_csd[EXT_CSD_BOOT_MULT] = sd->boot_part_size / (128 * KiB);
- sd->ext_csd[EXT_CSD_ACC_SIZE] = 0x6; /* Access size */
- sd->ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] = 0x4; /* HC Erase unit size */
+ sd->ext_csd[EXT_CSD_ACC_SIZE] = 0x1; /* Access size */
+ sd->ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] = 0x01; /* HC Erase unit size */
sd->ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT] = 0x01; /* HC erase timeout */
sd->ext_csd[EXT_CSD_REL_WR_SEC_C] = 0x1; /* Reliable write sector count */
- sd->ext_csd[EXT_CSD_HC_WP_GRP_SIZE] = 0x4; /* HC write protect group size */
- sd->ext_csd[EXT_CSD_S_C_VCC] = 0x8; /* Sleep current VCC */
- sd->ext_csd[EXT_CSD_S_C_VCCQ] = 0x7; /* Sleep current VCCQ */
- sd->ext_csd[EXT_CSD_S_A_TIMEOUT] = 0x11; /* Sleep/Awake timeout */
- sd->ext_csd[215] = (sectcount >> 24) & 0xff; /* Sector count */
- sd->ext_csd[214] = (sectcount >> 16) & 0xff; /* ... */
- sd->ext_csd[213] = (sectcount >> 8) & 0xff; /* ... */
- sd->ext_csd[EXT_CSD_SEC_CNT] = (sectcount & 0xff); /* ... */
- sd->ext_csd[210] = 0xa; /* Min write perf for 8bit@52Mhz */
- sd->ext_csd[209] = 0xa; /* Min read perf for 8bit@52Mhz */
- sd->ext_csd[208] = 0xa; /* Min write perf for 4bit@52Mhz */
- sd->ext_csd[207] = 0xa; /* Min read perf for 4bit@52Mhz */
- sd->ext_csd[206] = 0xa; /* Min write perf for 4bit@26Mhz */
- sd->ext_csd[205] = 0xa; /* Min read perf for 4bit@26Mhz */
- sd->ext_csd[EXT_CSD_PART_SWITCH_TIME] = 0x1;
- sd->ext_csd[EXT_CSD_OUT_OF_INTERRUPT_TIME] = 0x1;
- sd->ext_csd[EXT_CSD_CARD_TYPE] = 0x7;
- sd->ext_csd[EXT_CSD_STRUCTURE] = 0x2;
- sd->ext_csd[EXT_CSD_REV] = 0x5;
- sd->ext_csd[EXT_CSD_RPMB_MULT] = 0x1; /* RPMB size */
- sd->ext_csd[EXT_CSD_PARTITION_SUPPORT] = 0x3;
- sd->ext_csd[159] = 0x00; /* Max enhanced area size */
- sd->ext_csd[158] = 0x00; /* ... */
- sd->ext_csd[157] = 0xEC; /* ... */
+ sd->ext_csd[EXT_CSD_HC_WP_GRP_SIZE] = 0x01; /* HC write protect group size */
+ sd->ext_csd[EXT_CSD_S_C_VCC] = 0x01; /* Sleep current VCC */
+ sd->ext_csd[EXT_CSD_S_C_VCCQ] = 0x01; /* Sleep current VCCQ */
+ sd->ext_csd[EXT_CSD_S_A_TIMEOUT] = 0x01; /* Sleep/Awake timeout */
+ stl_le_p(&sd->ext_csd[EXT_CSD_SEC_CNT], sectcount); /* Sector count */
+ sd->ext_csd[210] = 0x46; /* Min write perf for 8bit@52Mhz */
+ sd->ext_csd[209] = 0x46; /* Min read perf for 8bit@52Mhz */
+ sd->ext_csd[208] = 0x46; /* Min write perf for 4bit@52Mhz */
+ sd->ext_csd[207] = 0x46; /* Min read perf for 4bit@52Mhz */
+ sd->ext_csd[206] = 0x46; /* Min write perf for 4bit@26Mhz */
+ sd->ext_csd[205] = 0x46; /* Min read perf for 4bit@26Mhz */
+ sd->ext_csd[EXT_CSD_CARD_TYPE] = 0b11;
+ sd->ext_csd[EXT_CSD_STRUCTURE] = 2;
+ sd->ext_csd[EXT_CSD_REV] = 3;
}
static void emmc_set_csd(SDState *sd, uint64_t size)
--
2.41.0
next prev parent reply other threads:[~2024-07-09 15:27 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-09 15:25 [PATCH v47 00/19] hw/sd/sdcard: Add eMMC support Philippe Mathieu-Daudé
2024-07-09 15:25 ` [PATCH v47 01/19] hw/sd/sdcard: Basis for " Philippe Mathieu-Daudé
2024-07-09 15:25 ` [PATCH v47 02/19] hw/sd/sdcard: Register generic command handlers Philippe Mathieu-Daudé
2024-07-09 15:25 ` [PATCH v47 03/19] hw/sd/sdcard: Register unimplemented " Philippe Mathieu-Daudé
2024-07-09 15:25 ` [PATCH v47 04/19] hw/sd/sdcard: Implement emmc_set_cid() Philippe Mathieu-Daudé
2024-07-09 15:25 ` [PATCH v47 05/19] hw/sd/sdcard: Implement emmc_set_csd() Philippe Mathieu-Daudé
2024-07-09 15:25 ` [PATCH v47 06/19] hw/sd/sdcard: Add emmc_cmd_SET_RELATIVE_ADDR handler (CMD3) Philippe Mathieu-Daudé
2024-07-09 15:25 ` [PATCH v47 07/19] hw/sd/sdcard: Fix SET_BLOCK_COUNT command argument on eMMC (CMD23) Philippe Mathieu-Daudé
2024-07-09 15:25 ` [PATCH v47 08/19] hw/sd/sdcard: Add mmc_cmd_PROGRAM_CID handler (CMD26) Philippe Mathieu-Daudé
2024-07-09 15:25 ` [PATCH v47 09/19] hw/sd/sdcard: Implement eMMC sleep state (CMD5) Philippe Mathieu-Daudé
2024-07-09 15:25 ` [PATCH v47 10/19] hw/sd/sdcard: Add emmc_cmd_SEND_EXT_CSD handler (CMD8) Philippe Mathieu-Daudé
2024-07-09 15:25 ` [PATCH v47 11/19] hw/sd/sdcard: Add eMMC 'boot-size' property Philippe Mathieu-Daudé
2024-07-09 15:45 ` Cédric Le Goater
2024-07-09 15:25 ` Philippe Mathieu-Daudé [this message]
2024-07-09 15:43 ` [PATCH v47 12/19] hw/sd/sdcard: Simplify EXT_CSD values for spec v4.3 Cédric Le Goater
2024-07-09 21:33 ` Philippe Mathieu-Daudé
2024-07-09 15:25 ` [PATCH v47 13/19] hw/sd/sdcard: Migrate ExtCSD 'modes' register Philippe Mathieu-Daudé
2024-07-09 15:25 ` [PATCH v47 14/19] hw/sd/sdcard: Add mmc SWITCH function support (CMD6) Philippe Mathieu-Daudé
2024-07-09 15:25 ` [PATCH v47 15/19] hw/sd/sdcard: Implement eMMC 'boot-mode' Philippe Mathieu-Daudé
2024-07-09 15:25 ` [Aspeed PATCH v47 16/19] hw/sd/sdcard: Support boot area in emmc image Philippe Mathieu-Daudé
2024-07-09 15:51 ` Cédric Le Goater
2024-07-09 15:25 ` [Aspeed PATCH v47 17/19] hw/sd/sdcard: Subtract bootarea size from blk Philippe Mathieu-Daudé
2024-07-09 15:25 ` [Aspeed PATCH v47 18/19] hw/sd/sdcard: Add boot config support Philippe Mathieu-Daudé
2024-07-09 15:52 ` Cédric Le Goater
2024-07-09 16:17 ` Philippe Mathieu-Daudé
2024-07-09 15:25 ` [PATCH v47 19/19] hw/sd/sdcard: Enable TYPE_EMMC card model Philippe Mathieu-Daudé
2024-07-09 15:42 ` Cédric Le Goater
2024-07-09 15:58 ` [PATCH v47 00/19] hw/sd/sdcard: Add eMMC support Cédric Le Goater
2024-07-09 21:39 ` Philippe Mathieu-Daudé
2024-07-10 4:58 ` Cédric Le Goater
2024-07-10 8:09 ` Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240709152556.52896-13-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=andrew@codeconstruct.com.au \
--cc=bmeng.cn@gmail.com \
--cc=clg@kaod.org \
--cc=jamin_lin@aspeedtech.com \
--cc=joel@jms.id.au \
--cc=leetroy@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=steven_lee@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).