From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Bin Meng" <bmeng.cn@gmail.com>,
"Steven Lee" <steven_lee@aspeedtech.com>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Francisco Iglesias" <francisco.iglesias@amd.com>,
"Sai Pavan Boddu" <sai.pavan.boddu@amd.com>,
"Luc Michel" <luc.michel@amd.com>,
qemu-arm@nongnu.org, qemu-block@nongnu.org,
"Troy Lee" <leetroy@gmail.com>,
"Jamin Lin" <jamin_lin@aspeedtech.com>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Joel Stanley" <joel@jms.id.au>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Edgar E . Iglesias" <edgar.iglesias@amd.com>,
"Cédric Le Goater" <clg@kaod.org>
Subject: [PATCH v48 12/12] hw/sd/sdcard: Support boot area in emmc image
Date: Wed, 10 Jul 2024 16:14:08 +0200 [thread overview]
Message-ID: <20240710141408.69275-13-philmd@linaro.org> (raw)
In-Reply-To: <20240710141408.69275-1-philmd@linaro.org>
From: Joel Stanley <joel@jms.id.au>
This assumes a specially constructed image:
dd if=/dev/zero of=mmc-bootarea.img count=2 bs=1M
dd if=u-boot-spl.bin of=mmc-bootarea.img conv=notrunc
dd if=u-boot.bin of=mmc-bootarea.img conv=notrunc count=64 bs=1K
cat mmc-bootarea.img obmc-phosphor-image.wic > mmc.img
truncate --size 16GB mmc.img
For now this still requires a mtd image to load the SPL:
qemu-system-arm -M tacoma-bmc -nographic \
-global driver=sd-card,property=emmc,value=true \
-drive file=mmc.img,if=sd,index=2,format=raw
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
hw/sd/sd.c | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index 86b857d414..8c68494b8b 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -774,6 +774,40 @@ static uint32_t sd_blk_len(SDState *sd)
return sd->blk_len;
}
+/*
+ * This requires a disk image that has two boot partitions inserted at the
+ * beginning of it. The size of the boot partitions is the "boot-size"
+ * property.
+ */
+static uint32_t sd_bootpart_offset(SDState *sd)
+{
+ bool partitions_enabled;
+ unsigned partition_access;
+
+ if (!sd->boot_part_size || !sd_is_emmc(sd)) {
+ return 0;
+ }
+
+ partitions_enabled = sd->ext_csd[EXT_CSD_PART_CONFIG]
+ & EXT_CSD_PART_CONFIG_EN_MASK;
+ if (!partitions_enabled) {
+ return 0;
+ }
+
+ partition_access = sd->ext_csd[EXT_CSD_PART_CONFIG]
+ & EXT_CSD_PART_CONFIG_ACC_MASK;
+ switch (partition_access) {
+ case EXT_CSD_PART_CONFIG_ACC_DEFAULT:
+ return sd->boot_part_size * 2;
+ case EXT_CSD_PART_CONFIG_ACC_BOOT0:
+ return 0;
+ case EXT_CSD_PART_CONFIG_ACC_BOOT0 + 1:
+ return sd->boot_part_size * 1;
+ default:
+ g_assert_not_reached();
+ }
+}
+
static uint64_t sd_req_get_address(SDState *sd, SDRequest req)
{
uint64_t addr;
@@ -806,6 +840,7 @@ static void sd_reset(DeviceState *dev)
sect = 0;
}
size = sect << HWBLOCK_SHIFT;
+ size -= sd_bootpart_offset(sd);
sect = sd_addr_to_wpnum(size) + 1;
@@ -1029,6 +1064,7 @@ void sd_set_cb(SDState *sd, qemu_irq readonly, qemu_irq insert)
static void sd_blk_read(SDState *sd, uint64_t addr, uint32_t len)
{
trace_sdcard_read_block(addr, len);
+ addr += sd_bootpart_offset(sd);
if (!sd->blk || blk_pread(sd->blk, addr, len, sd->data, 0) < 0) {
fprintf(stderr, "sd_blk_read: read error on host side\n");
}
@@ -1037,6 +1073,7 @@ static void sd_blk_read(SDState *sd, uint64_t addr, uint32_t len)
static void sd_blk_write(SDState *sd, uint64_t addr, uint32_t len)
{
trace_sdcard_write_block(addr, len);
+ addr += sd_bootpart_offset(sd);
if (!sd->blk || blk_pwrite(sd->blk, addr, len, sd->data, 0) < 0) {
fprintf(stderr, "sd_blk_write: write error on host side\n");
}
--
2.41.0
next prev parent reply other threads:[~2024-07-10 14:16 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-10 14:13 [PATCH v48 00/12] hw/sd/sdcard: Add eMMC support Philippe Mathieu-Daudé
2024-07-10 14:13 ` [PATCH v48 01/12] hw/sd/sdcard: Basis for " Philippe Mathieu-Daudé
2024-07-10 14:13 ` [PATCH v48 02/12] hw/sd/sdcard: Register generic command handlers Philippe Mathieu-Daudé
2024-07-10 14:13 ` [PATCH v48 03/12] hw/sd/sdcard: Register unimplemented " Philippe Mathieu-Daudé
2024-07-10 14:14 ` [PATCH v48 04/12] hw/sd/sdcard: Add emmc_cmd_SET_RELATIVE_ADDR handler (CMD3) Philippe Mathieu-Daudé
2024-07-10 14:14 ` [PATCH v48 05/12] hw/sd/sdcard: Fix SET_BLOCK_COUNT command argument on eMMC (CMD23) Philippe Mathieu-Daudé
2024-07-10 14:14 ` [PATCH v48 06/12] hw/sd/sdcard: Add mmc_cmd_PROGRAM_CID handler (CMD26) Philippe Mathieu-Daudé
2024-07-10 14:14 ` [PATCH v48 07/12] hw/sd/sdcard: Implement eMMC sleep state (CMD5) Philippe Mathieu-Daudé
2024-07-10 14:14 ` [PATCH v48 08/12] hw/sd/sdcard: Add emmc_cmd_SEND_EXT_CSD handler (CMD8) Philippe Mathieu-Daudé
2024-07-10 14:14 ` [PATCH v48 09/12] hw/sd/sdcard: Add eMMC 'boot-size' property Philippe Mathieu-Daudé
2024-07-10 14:14 ` [PATCH v48 10/12] hw/sd/sdcard: Implement eMMC 'boot-mode' Philippe Mathieu-Daudé
2024-07-10 14:14 ` [PATCH v48 11/12] hw/sd/sdcard: Add mmc SWITCH function support (CMD6) Philippe Mathieu-Daudé
2024-07-10 14:14 ` Philippe Mathieu-Daudé [this message]
2024-07-10 15:35 ` [PATCH v48 00/12] hw/sd/sdcard: Add eMMC support Cédric Le Goater
2024-07-10 16:57 ` Philippe Mathieu-Daudé
2024-07-10 19:20 ` Cédric Le Goater
2024-07-11 11:03 ` Cédric Le Goater
2024-07-11 14:08 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240710141408.69275-13-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=andrew@codeconstruct.com.au \
--cc=bmeng.cn@gmail.com \
--cc=clg@kaod.org \
--cc=edgar.iglesias@amd.com \
--cc=francisco.iglesias@amd.com \
--cc=jamin_lin@aspeedtech.com \
--cc=joel@jms.id.au \
--cc=leetroy@gmail.com \
--cc=luc.michel@amd.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=sai.pavan.boddu@amd.com \
--cc=steven_lee@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).