qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Daniel P. Berrangé" <berrange@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Thomas Huth" <thuth@redhat.com>,
	"Daniel P. Berrangé" <berrange@redhat.com>,
	"Michael Roth" <michael.roth@amd.com>,
	"Philippe Mathieu-Daudé" <philmd@linaro.org>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Marc-André Lureau" <marcandre.lureau@redhat.com>,
	"Konstantin Kostiuk" <kkostiuk@redhat.com>
Subject: [PATCH v3 09/22] qga: conditionalize schema for commands unsupported on non-Linux POSIX
Date: Fri, 12 Jul 2024 14:24:46 +0100	[thread overview]
Message-ID: <20240712132459.3974109-10-berrange@redhat.com> (raw)
In-Reply-To: <20240712132459.3974109-1-berrange@redhat.com>

Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the commands on non-Linux POSIX
platforms

The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from

    {"class": "CommandNotFound", "desc": "Command FOO has been disabled"}

to

    {"class": "CommandNotFound", "desc": "The command FOO has not been found"}

This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
---
 qga/commands-posix.c | 66 --------------------------------------------
 qga/qapi-schema.json | 30 +++++++++++---------
 2 files changed, 17 insertions(+), 79 deletions(-)

diff --git a/qga/commands-posix.c b/qga/commands-posix.c
index 0dd8555867..559d71ffae 100644
--- a/qga/commands-posix.c
+++ b/qga/commands-posix.c
@@ -887,56 +887,6 @@ void qmp_guest_set_user_password(const char *username,
 }
 #endif /* __linux__ || __FreeBSD__ */
 
-#ifndef __linux__
-
-void qmp_guest_suspend_disk(Error **errp)
-{
-    error_setg(errp, QERR_UNSUPPORTED);
-}
-
-void qmp_guest_suspend_ram(Error **errp)
-{
-    error_setg(errp, QERR_UNSUPPORTED);
-}
-
-void qmp_guest_suspend_hybrid(Error **errp)
-{
-    error_setg(errp, QERR_UNSUPPORTED);
-}
-
-GuestLogicalProcessorList *qmp_guest_get_vcpus(Error **errp)
-{
-    error_setg(errp, QERR_UNSUPPORTED);
-    return NULL;
-}
-
-int64_t qmp_guest_set_vcpus(GuestLogicalProcessorList *vcpus, Error **errp)
-{
-    error_setg(errp, QERR_UNSUPPORTED);
-    return -1;
-}
-
-GuestMemoryBlockList *qmp_guest_get_memory_blocks(Error **errp)
-{
-    error_setg(errp, QERR_UNSUPPORTED);
-    return NULL;
-}
-
-GuestMemoryBlockResponseList *
-qmp_guest_set_memory_blocks(GuestMemoryBlockList *mem_blks, Error **errp)
-{
-    error_setg(errp, QERR_UNSUPPORTED);
-    return NULL;
-}
-
-GuestMemoryBlockInfo *qmp_guest_get_memory_block_info(Error **errp)
-{
-    error_setg(errp, QERR_UNSUPPORTED);
-    return NULL;
-}
-
-#endif
-
 #ifdef HAVE_GETIFADDRS
 static GuestNetworkInterface *
 guest_find_interface(GuestNetworkInterfaceList *head,
@@ -1272,22 +1222,6 @@ qmp_guest_fstrim(bool has_minimum, int64_t minimum, Error **errp)
 /* add unsupported commands to the list of blocked RPCs */
 GList *ga_command_init_blockedrpcs(GList *blockedrpcs)
 {
-#if !defined(__linux__)
-    {
-        const char *list[] = {
-            "guest-suspend-disk", "guest-suspend-ram",
-            "guest-suspend-hybrid", "guest-get-vcpus", "guest-set-vcpus",
-            "guest-get-memory-blocks", "guest-set-memory-blocks",
-            "guest-get-memory-block-info",
-            NULL};
-        const char **p = list;
-
-        while (*p) {
-            blockedrpcs = g_list_append(blockedrpcs, g_strdup(*p++));
-        }
-    }
-#endif
-
 #if !defined(HAVE_GETIFADDRS)
     blockedrpcs = g_list_append(blockedrpcs,
                               g_strdup("guest-network-get-interfaces"));
diff --git a/qga/qapi-schema.json b/qga/qapi-schema.json
index 2f0215afc7..38483652ac 100644
--- a/qga/qapi-schema.json
+++ b/qga/qapi-schema.json
@@ -566,7 +566,8 @@
 #
 # Since: 1.1
 ##
-{ 'command': 'guest-suspend-disk', 'success-response': false }
+{ 'command': 'guest-suspend-disk', 'success-response': false,
+  'if': { 'any': ['CONFIG_LINUX', 'CONFIG_WIN32'] } }
 
 ##
 # @guest-suspend-ram:
@@ -602,7 +603,8 @@
 #
 # Since: 1.1
 ##
-{ 'command': 'guest-suspend-ram', 'success-response': false }
+{ 'command': 'guest-suspend-ram', 'success-response': false,
+  'if': { 'any': ['CONFIG_LINUX', 'CONFIG_WIN32'] } }
 
 ##
 # @guest-suspend-hybrid:
@@ -638,7 +640,7 @@
 # Since: 1.1
 ##
 { 'command': 'guest-suspend-hybrid', 'success-response': false,
-  'if': 'CONFIG_POSIX' }
+  'if': 'CONFIG_LINUX' }
 
 ##
 # @GuestIpAddressType:
@@ -751,7 +753,8 @@
 { 'struct': 'GuestLogicalProcessor',
   'data': {'logical-id': 'int',
            'online': 'bool',
-           '*can-offline': 'bool'} }
+           '*can-offline': 'bool'},
+  'if': { 'any': ['CONFIG_LINUX', 'CONFIG_WIN32'] } }
 
 ##
 # @guest-get-vcpus:
@@ -766,7 +769,8 @@
 # Since: 1.5
 ##
 { 'command': 'guest-get-vcpus',
-  'returns': ['GuestLogicalProcessor'] }
+  'returns': ['GuestLogicalProcessor'],
+  'if': { 'any': ['CONFIG_LINUX', 'CONFIG_WIN32'] } }
 
 ##
 # @guest-set-vcpus:
@@ -809,7 +813,7 @@
 { 'command': 'guest-set-vcpus',
   'data':    {'vcpus': ['GuestLogicalProcessor'] },
   'returns': 'int',
-  'if': 'CONFIG_POSIX' }
+  'if': 'CONFIG_LINUX' }
 
 ##
 # @GuestDiskBusType:
@@ -1103,7 +1107,7 @@
   'data': {'phys-index': 'uint64',
            'online': 'bool',
            '*can-offline': 'bool'},
-  'if': 'CONFIG_POSIX' }
+  'if': 'CONFIG_LINUX' }
 
 ##
 # @guest-get-memory-blocks:
@@ -1120,7 +1124,7 @@
 ##
 { 'command': 'guest-get-memory-blocks',
   'returns': ['GuestMemoryBlock'],
-  'if': 'CONFIG_POSIX' }
+  'if': 'CONFIG_LINUX' }
 
 ##
 # @GuestMemoryBlockResponseType:
@@ -1144,7 +1148,7 @@
 { 'enum': 'GuestMemoryBlockResponseType',
   'data': ['success', 'not-found', 'operation-not-supported',
            'operation-failed'],
-  'if': 'CONFIG_POSIX' }
+  'if': 'CONFIG_LINUX' }
 
 ##
 # @GuestMemoryBlockResponse:
@@ -1163,7 +1167,7 @@
   'data': { 'phys-index': 'uint64',
             'response': 'GuestMemoryBlockResponseType',
             '*error-code': 'int' },
-  'if': 'CONFIG_POSIX'}
+  'if': 'CONFIG_LINUX'}
 
 ##
 # @guest-set-memory-blocks:
@@ -1195,7 +1199,7 @@
 { 'command': 'guest-set-memory-blocks',
   'data':    {'mem-blks': ['GuestMemoryBlock'] },
   'returns': ['GuestMemoryBlockResponse'],
-  'if': 'CONFIG_POSIX' }
+  'if': 'CONFIG_LINUX' }
 
 ##
 # @GuestMemoryBlockInfo:
@@ -1208,7 +1212,7 @@
 ##
 { 'struct': 'GuestMemoryBlockInfo',
   'data': {'size': 'uint64'},
-  'if': 'CONFIG_POSIX' }
+  'if': 'CONFIG_LINUX' }
 
 ##
 # @guest-get-memory-block-info:
@@ -1221,7 +1225,7 @@
 ##
 { 'command': 'guest-get-memory-block-info',
   'returns': 'GuestMemoryBlockInfo',
-  'if': 'CONFIG_POSIX' }
+  'if': 'CONFIG_LINUX' }
 
 ##
 # @GuestExecStatus:
-- 
2.45.1



  parent reply	other threads:[~2024-07-12 13:27 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-12 13:24 [PATCH v3 00/22] qga: clean up command source locations and conditionals Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 01/22] qga: drop blocking of guest-get-memory-block-size command Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 02/22] qga: move linux vcpu command impls to commands-linux.c Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 03/22] qga: move linux suspend " Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 04/22] qga: move linux fs/disk " Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 05/22] qga: move linux disk/cpu stats " Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 06/22] qga: move linux memory block " Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 07/22] qga: move CONFIG_FSFREEZE/TRIM to be meson defined options Daniel P. Berrangé
2024-07-19  7:34   ` Konstantin Kostiuk
2024-07-12 13:24 ` [PATCH v3 08/22] qga: conditionalize schema for commands unsupported on Windows Daniel P. Berrangé
2024-07-12 13:24 ` Daniel P. Berrangé [this message]
2024-07-12 13:24 ` [PATCH v3 10/22] qga: conditionalize schema for commands requiring getifaddrs Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 11/22] qga: conditionalize schema for commands requiring linux/win32 Daniel P. Berrangé
2024-07-19  7:35   ` Konstantin Kostiuk
2024-07-12 13:24 ` [PATCH v3 12/22] qga: conditionalize schema for commands only supported on Windows Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 13/22] qga: conditionalize schema for commands requiring fsfreeze Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 14/22] qga: conditionalize schema for commands requiring fstrim Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 15/22] qga: conditionalize schema for commands requiring libudev Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 16/22] qga: conditionalize schema for commands requiring utmpx Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 17/22] qga: conditionalize schema for commands not supported on other UNIX Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 18/22] qga: don't disable fsfreeze commands if vss_init fails Daniel P. Berrangé
2024-07-19  7:35   ` Konstantin Kostiuk
2024-07-12 13:24 ` [PATCH v3 19/22] qga: move declare of QGAConfig struct to top of file Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 20/22] qga: remove pointless 'blockrpcs_key' variable Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 21/22] qga: allow configuration file path via the cli Daniel P. Berrangé
2024-07-19  7:35   ` Konstantin Kostiuk
2024-07-12 13:24 ` [PATCH v3 22/22] qga: centralize logic for disabling/enabling commands Daniel P. Berrangé
2024-07-19  7:36   ` Konstantin Kostiuk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240712132459.3974109-10-berrange@redhat.com \
    --to=berrange@redhat.com \
    --cc=kkostiuk@redhat.com \
    --cc=marcandre.lureau@redhat.com \
    --cc=michael.roth@amd.com \
    --cc=pbonzini@redhat.com \
    --cc=philmd@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).