From: "Daniel P. Berrangé" <berrange@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Thomas Huth" <thuth@redhat.com>,
"Daniel P. Berrangé" <berrange@redhat.com>,
"Michael Roth" <michael.roth@amd.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Marc-André Lureau" <marcandre.lureau@redhat.com>,
"Konstantin Kostiuk" <kkostiuk@redhat.com>
Subject: [PATCH v3 22/22] qga: centralize logic for disabling/enabling commands
Date: Fri, 12 Jul 2024 14:24:59 +0100 [thread overview]
Message-ID: <20240712132459.3974109-23-berrange@redhat.com> (raw)
In-Reply-To: <20240712132459.3974109-1-berrange@redhat.com>
It is confusing having many different pieces of code enabling and
disabling commands, and it is not clear that they all have the same
semantics, especially wrt prioritization of the block/allow lists.
The code attempted to prevent the user from setting both the block
and allow lists concurrently, however, the logic was flawed as it
checked settings in the configuration file separately from the
command line arguments. Thus it was possible to set a block list
in the config file and an allow list via a command line argument.
The --dump-conf option also creates a configuration file with both
keys present, even if unset, which means it is creating a config
that cannot actually be loaded again.
Centralizing the code in a single method "ga_apply_command_filters"
will provide a strong guarantee of consistency and clarify the
intended behaviour. With this there is no compelling technical
reason to prevent concurrent setting of both the allow and block
lists, so this flawed restriction is removed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
---
docs/interop/qemu-ga.rst | 14 +++++
qga/commands-posix.c | 6 --
qga/commands-win32.c | 6 --
qga/main.c | 128 +++++++++++++++++----------------------
4 files changed, 70 insertions(+), 84 deletions(-)
diff --git a/docs/interop/qemu-ga.rst b/docs/interop/qemu-ga.rst
index e42b370319..fb75cfd8d4 100644
--- a/docs/interop/qemu-ga.rst
+++ b/docs/interop/qemu-ga.rst
@@ -28,6 +28,20 @@ configuration options on the command line. For the same key, the last
option wins, but the lists accumulate (see below for configuration
file format).
+If an allowed RPCs list is defined in the configuration, then all
+RPCs will be blocked by default, except for the allowed list.
+
+If a blocked RPCs list is defined in the configuration, then all
+RPCs will be allowed by default, except for the blocked list.
+
+If both allowed and blocked RPCs lists are defined in the configuration,
+then all RPCs will be blocked by default, then the allowed list will
+be applied, followed by the blocked list.
+
+While filesystems are frozen, all except for a designated safe set
+of RPCs will blocked, regardless of what the general configuration
+declares.
+
Options
-------
diff --git a/qga/commands-posix.c b/qga/commands-posix.c
index f4104f2760..578d29f228 100644
--- a/qga/commands-posix.c
+++ b/qga/commands-posix.c
@@ -1136,12 +1136,6 @@ error:
#endif /* HAVE_GETIFADDRS */
-/* add unsupported commands to the list of blocked RPCs */
-GList *ga_command_init_blockedrpcs(GList *blockedrpcs)
-{
- return blockedrpcs;
-}
-
/* register init/cleanup routines for stateful command groups */
void ga_command_state_init(GAState *s, GACommandState *cs)
{
diff --git a/qga/commands-win32.c b/qga/commands-win32.c
index 5866cc2e3c..61b36da469 100644
--- a/qga/commands-win32.c
+++ b/qga/commands-win32.c
@@ -1958,12 +1958,6 @@ done:
g_free(rawpasswddata);
}
-/* add unsupported commands to the list of blocked RPCs */
-GList *ga_command_init_blockedrpcs(GList *blockedrpcs)
-{
- return blockedrpcs;
-}
-
/* register init/cleanup routines for stateful command groups */
void ga_command_state_init(GAState *s, GACommandState *cs)
{
diff --git a/qga/main.c b/qga/main.c
index 6ae911eb15..b8f7b1e4a3 100644
--- a/qga/main.c
+++ b/qga/main.c
@@ -423,60 +423,79 @@ static gint ga_strcmp(gconstpointer str1, gconstpointer str2)
return strcmp(str1, str2);
}
-/* disable commands that aren't safe for fsfreeze */
-static void ga_disable_not_allowed_freeze(const QmpCommand *cmd, void *opaque)
+static bool ga_command_is_allowed(const QmpCommand *cmd, GAState *state)
{
- bool allowed = false;
int i = 0;
+ GAConfig *config = state->config;
const char *name = qmp_command_name(cmd);
+ /* Fallback policy is allow everything */
+ bool allowed = true;
- while (ga_freeze_allowlist[i] != NULL) {
- if (strcmp(name, ga_freeze_allowlist[i]) == 0) {
+ if (config->allowedrpcs) {
+ /*
+ * If an allow-list is given, this changes the fallback
+ * policy to deny everything
+ */
+ allowed = false;
+
+ if (g_list_find_custom(config->allowedrpcs, name, ga_strcmp) != NULL) {
allowed = true;
}
- i++;
}
- if (!allowed) {
- g_debug("disabling command: %s", name);
- qmp_disable_command(&ga_commands, name, "the agent is in frozen state");
- }
-}
-/* [re-]enable all commands, except those explicitly blocked by user */
-static void ga_enable_non_blocked(const QmpCommand *cmd, void *opaque)
-{
- GAState *s = opaque;
- GList *blockedrpcs = s->blockedrpcs;
- GList *allowedrpcs = s->allowedrpcs;
- const char *name = qmp_command_name(cmd);
-
- if (g_list_find_custom(blockedrpcs, name, ga_strcmp) == NULL) {
- if (qmp_command_is_enabled(cmd)) {
- return;
+ /*
+ * If both allowedrpcs and blockedrpcs are set, the blocked
+ * list will take priority
+ */
+ if (config->blockedrpcs) {
+ if (g_list_find_custom(config->blockedrpcs, name, ga_strcmp) != NULL) {
+ allowed = false;
}
+ }
- if (allowedrpcs &&
- g_list_find_custom(allowedrpcs, name, ga_strcmp) == NULL) {
- return;
- }
+ /*
+ * If frozen, this filtering must take priority over
+ * absolutely everything
+ */
+ if (state->frozen) {
+ allowed = false;
- g_debug("enabling command: %s", name);
- qmp_enable_command(&ga_commands, name);
+ while (ga_freeze_allowlist[i] != NULL) {
+ if (strcmp(name, ga_freeze_allowlist[i]) == 0) {
+ allowed = true;
+ }
+ i++;
+ }
}
+
+ return allowed;
}
-/* disable commands that aren't allowed */
-static void ga_disable_not_allowed(const QmpCommand *cmd, void *opaque)
+static void ga_apply_command_filters_iter(const QmpCommand *cmd, void *opaque)
{
- GList *allowedrpcs = opaque;
+ GAState *state = opaque;
+ bool want = ga_command_is_allowed(cmd, state);
+ bool have = qmp_command_is_enabled(cmd);
const char *name = qmp_command_name(cmd);
- if (g_list_find_custom(allowedrpcs, name, ga_strcmp) == NULL) {
+ if (want == have) {
+ return;
+ }
+
+ if (have) {
g_debug("disabling command: %s", name);
qmp_disable_command(&ga_commands, name, "the command is not allowed");
+ } else {
+ g_debug("enabling command: %s", name);
+ qmp_enable_command(&ga_commands, name);
}
}
+static void ga_apply_command_filters(GAState *state)
+{
+ qmp_for_each_command(&ga_commands, ga_apply_command_filters_iter, state);
+}
+
static bool ga_create_file(const char *path)
{
int fd = open(path, O_CREAT | O_WRONLY, S_IWUSR | S_IRUSR);
@@ -509,15 +528,14 @@ void ga_set_frozen(GAState *s)
if (ga_is_frozen(s)) {
return;
}
- /* disable all forbidden (for frozen state) commands */
- qmp_for_each_command(&ga_commands, ga_disable_not_allowed_freeze, NULL);
g_warning("disabling logging due to filesystem freeze");
- ga_disable_logging(s);
s->frozen = true;
if (!ga_create_file(s->state_filepath_isfrozen)) {
g_warning("unable to create %s, fsfreeze may not function properly",
s->state_filepath_isfrozen);
}
+ ga_apply_command_filters(s);
+ ga_disable_logging(s);
}
void ga_unset_frozen(GAState *s)
@@ -549,12 +567,12 @@ void ga_unset_frozen(GAState *s)
}
/* enable all disabled, non-blocked and allowed commands */
- qmp_for_each_command(&ga_commands, ga_enable_non_blocked, s);
s->frozen = false;
if (!ga_delete_file(s->state_filepath_isfrozen)) {
g_warning("unable to delete %s, fsfreeze may not function properly",
s->state_filepath_isfrozen);
}
+ ga_apply_command_filters(s);
}
#ifdef CONFIG_FSFREEZE
@@ -1086,13 +1104,6 @@ static void config_load(GAConfig *config, const char *confpath, bool required)
split_list(config->aliststr, ","));
}
- if (g_key_file_has_key(keyfile, "general", "block-rpcs", NULL) &&
- g_key_file_has_key(keyfile, "general", "allow-rpcs", NULL)) {
- g_critical("wrong config, using 'block-rpcs' and 'allow-rpcs' keys at"
- " the same time is not allowed");
- exit(EXIT_FAILURE);
- }
-
end:
g_key_file_free(keyfile);
if (gerr && (required ||
@@ -1172,7 +1183,6 @@ static void config_parse(GAConfig *config, int argc, char **argv)
{
const char *sopt = "hVvdc:m:p:l:f:F::b:a:s:t:Dr";
int opt_ind = 0, ch;
- bool block_rpcs = false, allow_rpcs = false;
const struct option lopt[] = {
{ "help", 0, NULL, 'h' },
{ "version", 0, NULL, 'V' },
@@ -1268,7 +1278,6 @@ static void config_parse(GAConfig *config, int argc, char **argv)
}
config->blockedrpcs = g_list_concat(config->blockedrpcs,
split_list(optarg, ","));
- block_rpcs = true;
break;
}
case 'a': {
@@ -1278,7 +1287,6 @@ static void config_parse(GAConfig *config, int argc, char **argv)
}
config->allowedrpcs = g_list_concat(config->allowedrpcs,
split_list(optarg, ","));
- allow_rpcs = true;
break;
}
#ifdef _WIN32
@@ -1319,12 +1327,6 @@ static void config_parse(GAConfig *config, int argc, char **argv)
exit(EXIT_FAILURE);
}
}
-
- if (block_rpcs && allow_rpcs) {
- g_critical("wrong commandline, using --block-rpcs and --allow-rpcs at the"
- " same time is not allowed");
- exit(EXIT_FAILURE);
- }
}
static void config_free(GAConfig *config)
@@ -1435,7 +1437,6 @@ static GAState *initialize_agent(GAConfig *config, int socket_activation)
s->deferred_options.log_filepath = config->log_filepath;
}
ga_disable_logging(s);
- qmp_for_each_command(&ga_commands, ga_disable_not_allowed_freeze, NULL);
} else {
if (config->daemonize) {
become_daemon(config->pid_filepath);
@@ -1459,25 +1460,6 @@ static GAState *initialize_agent(GAConfig *config, int socket_activation)
return NULL;
}
- if (config->allowedrpcs) {
- qmp_for_each_command(&ga_commands, ga_disable_not_allowed, config->allowedrpcs);
- s->allowedrpcs = config->allowedrpcs;
- }
-
- /*
- * Some commands can be blocked due to system limitation.
- * Initialize blockedrpcs list even if allowedrpcs specified.
- */
- config->blockedrpcs = ga_command_init_blockedrpcs(config->blockedrpcs);
- if (config->blockedrpcs) {
- GList *l = config->blockedrpcs;
- s->blockedrpcs = config->blockedrpcs;
- do {
- g_debug("disabling command: %s", (char *)l->data);
- qmp_disable_command(&ga_commands, l->data, NULL);
- l = g_list_next(l);
- } while (l);
- }
s->command_state = ga_command_state_new();
ga_command_state_init(s, s->command_state);
ga_command_state_init_all(s->command_state);
@@ -1503,6 +1485,8 @@ static GAState *initialize_agent(GAConfig *config, int socket_activation)
}
#endif
+ ga_apply_command_filters(s);
+
ga_state = s;
return s;
}
--
2.45.1
next prev parent reply other threads:[~2024-07-12 13:27 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-12 13:24 [PATCH v3 00/22] qga: clean up command source locations and conditionals Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 01/22] qga: drop blocking of guest-get-memory-block-size command Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 02/22] qga: move linux vcpu command impls to commands-linux.c Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 03/22] qga: move linux suspend " Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 04/22] qga: move linux fs/disk " Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 05/22] qga: move linux disk/cpu stats " Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 06/22] qga: move linux memory block " Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 07/22] qga: move CONFIG_FSFREEZE/TRIM to be meson defined options Daniel P. Berrangé
2024-07-19 7:34 ` Konstantin Kostiuk
2024-07-12 13:24 ` [PATCH v3 08/22] qga: conditionalize schema for commands unsupported on Windows Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 09/22] qga: conditionalize schema for commands unsupported on non-Linux POSIX Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 10/22] qga: conditionalize schema for commands requiring getifaddrs Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 11/22] qga: conditionalize schema for commands requiring linux/win32 Daniel P. Berrangé
2024-07-19 7:35 ` Konstantin Kostiuk
2024-07-12 13:24 ` [PATCH v3 12/22] qga: conditionalize schema for commands only supported on Windows Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 13/22] qga: conditionalize schema for commands requiring fsfreeze Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 14/22] qga: conditionalize schema for commands requiring fstrim Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 15/22] qga: conditionalize schema for commands requiring libudev Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 16/22] qga: conditionalize schema for commands requiring utmpx Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 17/22] qga: conditionalize schema for commands not supported on other UNIX Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 18/22] qga: don't disable fsfreeze commands if vss_init fails Daniel P. Berrangé
2024-07-19 7:35 ` Konstantin Kostiuk
2024-07-12 13:24 ` [PATCH v3 19/22] qga: move declare of QGAConfig struct to top of file Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 20/22] qga: remove pointless 'blockrpcs_key' variable Daniel P. Berrangé
2024-07-12 13:24 ` [PATCH v3 21/22] qga: allow configuration file path via the cli Daniel P. Berrangé
2024-07-19 7:35 ` Konstantin Kostiuk
2024-07-12 13:24 ` Daniel P. Berrangé [this message]
2024-07-19 7:36 ` [PATCH v3 22/22] qga: centralize logic for disabling/enabling commands Konstantin Kostiuk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240712132459.3974109-23-berrange@redhat.com \
--to=berrange@redhat.com \
--cc=kkostiuk@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=michael.roth@amd.com \
--cc=pbonzini@redhat.com \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).