[PULL 10/28] hw/i2c/mpc_i2c: Fix mmio region size

["Philippe Mathieu-Daudé" <philmd@linaro.org>]

From: BALATON Zoltan <balaton@eik.bme.hu>

The last register of this device is at offset 0x14 occupying 8 bits so
to cover it the mmio region needs to be 0x15 bytes long. Also correct
the name of the field storing this register value to match the
register name.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Fixes: 7abb479c7a ("PPC: E500: Add FSL I2C controller")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240721225506.B32704E6039@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 hw/i2c/mpc_i2c.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/hw/i2c/mpc_i2c.c b/hw/i2c/mpc_i2c.c
index cb051a520f7..06d4ce7d68d 100644
--- a/hw/i2c/mpc_i2c.c
+++ b/hw/i2c/mpc_i2c.c
@@ -82,7 +82,7 @@ struct MPCI2CState {
     uint8_t cr;
     uint8_t sr;
     uint8_t dr;
-    uint8_t dfssr;
+    uint8_t dfsrr;
 };
 
 static bool mpc_i2c_is_enabled(MPCI2CState *s)
@@ -293,7 +293,7 @@ static void mpc_i2c_write(void *opaque, hwaddr addr,
         }
         break;
     case MPC_I2C_DFSRR:
-        s->dfssr = value;
+        s->dfsrr = value;
         break;
     default:
         DPRINTF("ERROR: Bad write addr 0x%x\n", (unsigned int)addr);
@@ -319,7 +319,7 @@ static const VMStateDescription mpc_i2c_vmstate = {
         VMSTATE_UINT8(cr, MPCI2CState),
         VMSTATE_UINT8(sr, MPCI2CState),
         VMSTATE_UINT8(dr, MPCI2CState),
-        VMSTATE_UINT8(dfssr, MPCI2CState),
+        VMSTATE_UINT8(dfsrr, MPCI2CState),
         VMSTATE_END_OF_LIST()
     }
 };
@@ -329,7 +329,7 @@ static void mpc_i2c_realize(DeviceState *dev, Error **errp)
     MPCI2CState  *i2c = MPC_I2C(dev);
     sysbus_init_irq(SYS_BUS_DEVICE(dev), &i2c->irq);
     memory_region_init_io(&i2c->iomem, OBJECT(i2c), &i2c_ops, i2c,
-                          "mpc-i2c", 0x14);
+                          "mpc-i2c", 0x15);
     sysbus_init_mmio(SYS_BUS_DEVICE(dev), &i2c->iomem);
     i2c->bus = i2c_init_bus(dev, "i2c");
 }
-- 
2.41.0