From: Igor Mammedov <imammedo@redhat.com>
To: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Shiju Jose <shiju.jose@huawei.com>,
"Michael S. Tsirkin" <mst@redhat.com>,
Ani Sinha <anisinha@redhat.com>,
Dongjiu Geng <gengdongjiu1@gmail.com>,
Peter Maydell <peter.maydell@linaro.org>,
Shannon Zhao <shannon.zhaosl@gmail.com>,
linux-kernel@vger.kernel.org, qemu-arm@nongnu.org,
qemu-devel@nongnu.org
Subject: Re: [PATCH v6 02/10] arm/virt: Wire up a GED error device for ACPI / GHES
Date: Mon, 12 Aug 2024 13:27:11 +0200 [thread overview]
Message-ID: <20240812132711.7c23df55@imammedo.users.ipa.redhat.com> (raw)
In-Reply-To: <5965df0d8c11890d43c66a2be424ac5a82614599.1723119423.git.mchehab+huawei@kernel.org>
On Thu, 8 Aug 2024 14:26:28 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> Adds support to ARM virtualization to allow handling
> generic error ACPI Event via GED & error source device.
>
> It is aligned with Linux Kernel patch:
> https://lore.kernel.org/lkml/1272350481-27951-8-git-send-email-ying.huang@intel.com/
>
> Co-authored-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> Co-authored-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
other than question below mostly to arm/virt maintainers, LGTM
Acked-by: Igor Mammedov <imammedo@redhat.com>
> ---
> hw/acpi/ghes.c | 3 +++
> hw/arm/virt-acpi-build.c | 1 +
> hw/arm/virt.c | 12 +++++++++++-
> include/hw/acpi/ghes.h | 3 +++
> include/hw/arm/virt.h | 1 +
> 5 files changed, 19 insertions(+), 1 deletion(-)
>
> diff --git a/hw/acpi/ghes.c b/hw/acpi/ghes.c
> index e9511d9b8f71..13b105c5d02d 100644
> --- a/hw/acpi/ghes.c
> +++ b/hw/acpi/ghes.c
> @@ -444,6 +444,9 @@ int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
> return ret;
> }
>
> +NotifierList acpi_generic_error_notifiers =
> + NOTIFIER_LIST_INITIALIZER(error_device_notifiers);
> +
> bool acpi_ghes_present(void)
> {
> AcpiGedState *acpi_ged_state;
> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index f76fb117adff..1769467d23b2 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -858,6 +858,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
> }
>
> acpi_dsdt_add_power_button(scope);
> + aml_append(scope, aml_error_device());
> #ifdef CONFIG_TPM
> acpi_dsdt_add_tpm(scope, vms);
> #endif
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index 687fe0bb8bc9..22448e5c5b73 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -677,7 +677,7 @@ static inline DeviceState *create_acpi_ged(VirtMachineState *vms)
> DeviceState *dev;
> MachineState *ms = MACHINE(vms);
> int irq = vms->irqmap[VIRT_ACPI_GED];
> - uint32_t event = ACPI_GED_PWR_DOWN_EVT;
> + uint32_t event = ACPI_GED_PWR_DOWN_EVT | ACPI_GED_ERROR_EVT;
given how often error injection would be used, does it make a sense
to make it always enabled? (it after all consumes guest RAM for
error block buffer)
Maybe we need to add a machine property to enable it when desired?
What arm/virt folk think?
>
> if (ms->ram_slots) {
> event |= ACPI_GED_MEM_HOTPLUG_EVT;
> @@ -1009,6 +1009,13 @@ static void virt_powerdown_req(Notifier *n, void *opaque)
> }
> }
>
> +static void virt_generic_error_req(Notifier *n, void *opaque)
> +{
> + VirtMachineState *s = container_of(n, VirtMachineState, generic_error_notifier);
> +
> + acpi_send_event(s->acpi_dev, ACPI_GENERIC_ERROR);
> +}
> +
> static void create_gpio_keys(char *fdt, DeviceState *pl061_dev,
> uint32_t phandle)
> {
> @@ -2385,6 +2392,9 @@ static void machvirt_init(MachineState *machine)
>
> if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) {
> vms->acpi_dev = create_acpi_ged(vms);
> + vms->generic_error_notifier.notify = virt_generic_error_req;
> + notifier_list_add(&acpi_generic_error_notifiers,
> + &vms->generic_error_notifier);
> } else {
> create_gpio_devices(vms, VIRT_GPIO, sysmem);
> }
> diff --git a/include/hw/acpi/ghes.h b/include/hw/acpi/ghes.h
> index 674f6958e905..fb80897e7eac 100644
> --- a/include/hw/acpi/ghes.h
> +++ b/include/hw/acpi/ghes.h
> @@ -23,6 +23,9 @@
> #define ACPI_GHES_H
>
> #include "hw/acpi/bios-linker-loader.h"
> +#include "qemu/notify.h"
> +
> +extern NotifierList acpi_generic_error_notifiers;
>
> /*
> * Values for Hardware Error Notification Type field
> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> index a4d937ed45ac..ad9f6e94dcc5 100644
> --- a/include/hw/arm/virt.h
> +++ b/include/hw/arm/virt.h
> @@ -175,6 +175,7 @@ struct VirtMachineState {
> DeviceState *gic;
> DeviceState *acpi_dev;
> Notifier powerdown_notifier;
> + Notifier generic_error_notifier;
> PCIBus *bus;
> char *oem_id;
> char *oem_table_id;
next prev parent reply other threads:[~2024-08-12 11:28 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-08 12:26 [PATCH v6 00/10] Add ACPI CPER firmware first error injection on ARM emulation Mauro Carvalho Chehab
2024-08-08 12:26 ` [PATCH v6 01/10] acpi/generic_event_device: add an APEI error device Mauro Carvalho Chehab
2024-08-12 11:20 ` Igor Mammedov
2024-08-08 12:26 ` [PATCH v6 02/10] arm/virt: Wire up a GED error device for ACPI / GHES Mauro Carvalho Chehab
2024-08-12 11:27 ` Igor Mammedov [this message]
2024-08-08 12:26 ` [PATCH v6 03/10] acpi/ghes: Add support for GED error device Mauro Carvalho Chehab
2024-08-12 11:28 ` Igor Mammedov
2024-08-08 12:26 ` [PATCH v6 04/10] qapi/ghes-cper: add an interface to do generic CPER error injection Mauro Carvalho Chehab
2024-08-08 13:23 ` Markus Armbruster
2024-08-12 11:57 ` Igor Mammedov
2024-08-13 22:52 ` Mauro Carvalho Chehab
2024-08-08 12:26 ` [PATCH v6 05/10] acpi/ghes: rework the logic to handle HEST source ID Mauro Carvalho Chehab
2024-08-08 12:26 ` [PATCH v6 06/10] acpi/ghes: add support for generic error injection via QAPI Mauro Carvalho Chehab
2024-08-08 12:26 ` [PATCH v6 07/10] docs: acpi_hest_ghes: fix documentation for CPER size Mauro Carvalho Chehab
2024-08-12 11:59 ` Igor Mammedov
2024-08-08 12:26 ` [PATCH v6 08/10] scripts/ghes_inject: add a script to generate GHES error inject Mauro Carvalho Chehab
2024-08-08 13:21 ` Markus Armbruster
2024-08-08 12:26 ` [PATCH v6 09/10] target/arm: add an experimental mpidr arm cpu property object Mauro Carvalho Chehab
2024-08-12 12:02 ` Igor Mammedov
2024-08-08 12:26 ` [PATCH v6 10/10] scripts/arm_processor_error.py: retrieve mpidr if not filled Mauro Carvalho Chehab
2024-08-08 12:57 ` [PATCH v6 00/10] Add ACPI CPER firmware first error injection on ARM emulation Mauro Carvalho Chehab
2024-08-12 12:18 ` Igor Mammedov
2024-08-13 23:29 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240812132711.7c23df55@imammedo.users.ipa.redhat.com \
--to=imammedo@redhat.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=anisinha@redhat.com \
--cc=gengdongjiu1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab+huawei@kernel.org \
--cc=mst@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=shannon.zhaosl@gmail.com \
--cc=shiju.jose@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).