From: Ani Sinha <anisinha@redhat.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ani Sinha <anisinha@redhat.com>,
qemu-trivial@nongnu.org, zhao1.liu@intel.com, armbru@redhat.com,
kvm@vger.kernel.org, qemu-devel@nongnu.org
Subject: [PATCH v5 1/2] kvm: replace fprintf with error_report()/printf() in kvm_init()
Date: Wed, 28 Aug 2024 13:26:28 +0530 [thread overview]
Message-ID: <20240828075630.7754-2-anisinha@redhat.com> (raw)
In-Reply-To: <20240828075630.7754-1-anisinha@redhat.com>
error_report() is more appropriate for error situations. Replace fprintf with
error_report() and error_printf() as appropriate. Cosmetic. No functional
change.
CC: qemu-trivial@nongnu.org
CC: zhao1.liu@intel.com
CC: armbru@redhat.com
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
---
accel/kvm/kvm-all.c | 40 ++++++++++++++++++----------------------
1 file changed, 18 insertions(+), 22 deletions(-)
changelog:
v2: fix a bug.
v3: replace one instance of error_report() with error_printf(). added tags.
v4: changes suggested by Markus.
v5: more changes from Markus's comments on v4.
diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c
index 75d11a07b2..fcc157f0e6 100644
--- a/accel/kvm/kvm-all.c
+++ b/accel/kvm/kvm-all.c
@@ -2427,7 +2427,7 @@ static int kvm_init(MachineState *ms)
QLIST_INIT(&s->kvm_parked_vcpus);
s->fd = qemu_open_old(s->device ?: "/dev/kvm", O_RDWR);
if (s->fd == -1) {
- fprintf(stderr, "Could not access KVM kernel module: %m\n");
+ error_report("Could not access KVM kernel module: %m");
ret = -errno;
goto err;
}
@@ -2437,13 +2437,13 @@ static int kvm_init(MachineState *ms)
if (ret >= 0) {
ret = -EINVAL;
}
- fprintf(stderr, "kvm version too old\n");
+ error_report("kvm version too old");
goto err;
}
if (ret > KVM_API_VERSION) {
ret = -EINVAL;
- fprintf(stderr, "kvm version not supported\n");
+ error_report("kvm version not supported");
goto err;
}
@@ -2488,26 +2488,22 @@ static int kvm_init(MachineState *ms)
} while (ret == -EINTR);
if (ret < 0) {
- fprintf(stderr, "ioctl(KVM_CREATE_VM) failed: %d %s\n", -ret,
- strerror(-ret));
+ error_report("ioctl(KVM_CREATE_VM) failed: %s", strerror(-ret));
#ifdef TARGET_S390X
if (ret == -EINVAL) {
- fprintf(stderr,
- "Host kernel setup problem detected. Please verify:\n");
- fprintf(stderr, "- for kernels supporting the switch_amode or"
- " user_mode parameters, whether\n");
- fprintf(stderr,
- " user space is running in primary address space\n");
- fprintf(stderr,
- "- for kernels supporting the vm.allocate_pgste sysctl, "
- "whether it is enabled\n");
+ error_printf("Host kernel setup problem detected."
+ " Please verify:\n");
+ error_printf("- for kernels supporting the"
+ " switch_amode or user_mode parameters, whether");
+ error_printf(" user space is running in primary address space\n");
+ error_printf("- for kernels supporting the vm.allocate_pgste"
+ " sysctl, whether it is enabled\n");
}
#elif defined(TARGET_PPC)
if (ret == -EINVAL) {
- fprintf(stderr,
- "PPC KVM module is not loaded. Try modprobe kvm_%s.\n",
- (type == 2) ? "pr" : "hv");
+ error_printf("PPC KVM module is not loaded. Try modprobe kvm_%s.\n",
+ (type == 2) ? "pr" : "hv");
}
#endif
goto err;
@@ -2526,9 +2522,9 @@ static int kvm_init(MachineState *ms)
nc->name, nc->num, soft_vcpus_limit);
if (nc->num > hard_vcpus_limit) {
- fprintf(stderr, "Number of %s cpus requested (%d) exceeds "
- "the maximum cpus supported by KVM (%d)\n",
- nc->name, nc->num, hard_vcpus_limit);
+ error_report("Number of %s cpus requested (%d) exceeds "
+ "the maximum cpus supported by KVM (%d)",
+ nc->name, nc->num, hard_vcpus_limit);
exit(1);
}
}
@@ -2542,8 +2538,8 @@ static int kvm_init(MachineState *ms)
}
if (missing_cap) {
ret = -EINVAL;
- fprintf(stderr, "kvm does not support %s\n%s",
- missing_cap->name, upgrade_note);
+ error_report("kvm does not support %s", missing_cap->name);
+ error_printf("%s", upgrade_note);
goto err;
}
--
2.42.0
next prev parent reply other threads:[~2024-08-28 7:57 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-28 7:56 [PATCH v5 0/2] Some refactoring Ani Sinha
2024-08-28 7:56 ` Ani Sinha [this message]
2024-08-28 11:23 ` [PATCH v5 1/2] kvm: replace fprintf with error_report()/printf() in kvm_init() Markus Armbruster
2024-08-28 12:40 ` Ani Sinha
2024-08-28 13:16 ` Markus Armbruster
2024-08-28 7:56 ` [PATCH v5 2/2] kvm: refactor core virtual machine creation into its own function Ani Sinha
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240828075630.7754-2-anisinha@redhat.com \
--to=anisinha@redhat.com \
--cc=armbru@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-trivial@nongnu.org \
--cc=zhao1.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).